Reviews
Genuine Akrapovic Link Pipe for Ducati Monster 2021
There was a small issue with the fitment of the exhaust and needed other options for comparison purposes. It would be used in one way or another anyway. Yes, these are not particularly cheap but they are well worth the money. Fiinding the right link pipe was straight forward by using Akrapovic schematics and searching model of bike. When I got this part number, I searched Webike and there it was. Luckily, this was on sale at the time and cost less than I could get locally. I had some parts already in my basket and got them all shipped using EMS to save funds. The order arrived in 5 days as always totally perfect and no issues. The link pipe came in the Akrapovic box and was very well padded inside. The pipes were all very well made and the welds are super clean. You do get all the attachemnts you need to add thte the existing pipe so no need to worry. I needed to try a different version of the link pipe as the one on now does not sit right and causes some scuffing to the pegs. This one seems to be working better than the original one so this was of course a great purchase. Thanks Webike, very pleased with all your hard work. View detail
Genuine Akrapovic Heat Shield for RSV4 2020
This was a replacement heat shield that I needed for the RSV4 2020 that got a little damage after a small spill. The exhaust was perfectly fine but the heat shield took some scratches and looked bad. Finding the right one for this model bike was super easy as I just searched for the bike and then the brand I wanted into Webike and thisd came up. Very good on price too and slightly cheaper than could be sourced locally. I did have a couple of other small parts in this order too and shipping them all together saved on cost. My order was shipped using EMS and arrived safely in 5 days. The packages in side the box were very well padded and there were no damages to anything inside. This heat shiled is a carbon fibre one and although they are very tough, you still need to be careful not to scratch the outer coating. The heat shiedl itself is a gorgeous piece of craftsmanship and looks absolutely stunning. The weave is precise and the finsih is super glossy. The fitment was a piece of cake and went on smoothly and without a hitch. As I said, there was nothing badly damaged with the exhaust, it was literally a few scratched that would not buff out. Very happy with how this now looks and the bike is back to how it should be, pristine. Great work Webike, thank you. View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
I looked at it in comparison. Both
I tried both Slip-on lineCarbon and Slip-on lineTruck di.
There is also a powerful low-speed Torque. Carbon, on the other hand, is a little slower at low speeds, but it seems to accelerate faster up to high rpm.
I will do so. This is a personal opinion, so you can choose by Design
I think. I think the performance of both is excellent.
View detail
To reduce volume
I have an AKRAPOVIC Silencer on my car, but I think it is too loud and I would be stopped by the police if I were to ride on the street.
I was looking for a variety of baffles, but AKRAPOVIC's Silencer has a special outlet shape, so I could not use a common universal baffle at all, and I had to use an OEM baffle. But since I bought AKRAPOVIC for the first time, I didn't know much about models and models, so I looked for a baffle that fits with the shape of the Silencer, and ended up buying a different product.
The appearance is the same, but the exit size is different depending on the car model, so the one for S1000RR cannot be inserted here. This was indeed a lack of confirmation on my part.
Please take note of this if you are considering AKRAPOVIC's Baffle.
There are subtle differences, so if you get it wrong, you won't be able to install it.
View detail
I did it anyway.
Slip-on lineTruck di, and I put it on!
The look of the first Silencer in the shape you're interested in is self-satisfying.
It is not too much, but it is something better. By the way, as soon as I put it up.
The material is aluminum, so it looks like a cord when peeled off.
I hope that the heat will make it disappear. I hope the heat will make it go away.
View detail
The written Size is different.
The size is written, but the length was 75mm. The width is
Is there something about Sticker, or is there a notation?
Photos are uploaded for reference.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Quieter than OEM?
I replaced the Slip-on lineCarbon Exhaust with the Slip-on lineTruck exhaust and actually ran the engine at full power. I wonder why this exhaust system is not JMCA or Japan Government Certificated. Why is it that the volume is the same etc. as the standard value, but only for motorcycles?
I wonder why you are so strict on Exhaust System. Even though there is no regulation for cars, except for the volume, when the Exhaust System is replaced!
View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB300R
What's that? It's on. Sweat.
Today, we temporarily installed the muffler. After much deliberation, we decided to go with the Acrabo muffler.
I really wanted a government-approved muffler with a reasonably good sound.
I don't like the shape of it, but I like the shape of the Aklab, it's perfect, but the sound is... sweaty.
I bought it because I thought it would be a good time to break it in after the break-in period.
Shipped 3 days later... sweat.
I had some time today, so I did a temporary attachment.
My CB250R is an 8BK, and this muffler is an impression of the 2BK muffler up to '21. The 8BK also has a 2BK exhaust manifold and slip-ons.
I knew it would be attached, but I thought that 2BK slip-ons would not be attached to the 8BKOEM exhaust manifold.
I was thinking about it. (I had heard some impressions that the 2BK Moriwaki exhaust manifold did not fit the 8BKOEM muffler.)
I was going to buy a 2BK exhaust manifold if it didn't come with this aclab.
because of ...
What? It's attached. Of course, it's not broken in yet, so it's a temporary installation. The exhaust manifold is not banded yet.
But it's like there's nothing to resist. It feels normal.
And when I put it on, I'm still concerned about the sound.
It was a blast, I felt it was like a Harley with a modified muffler.
I would like to remove the baffles and modify the sound deadening system.
I don't like the sound to be too Large... sweat.
For now, it's just a temporary installation today, so when the break-in is over and it's time to put it on for real, we'll do it.
I would like to make an impression to see if there are any obstacles.
I'm sure you have your preferences, but the sound is a blast. sweat
View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
It's easy
Heat Guard installed, took me a while to figure it out because of the orientation of the Band. Please see the pictures. View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
The contents are unknown, so I will Up.
I purchased the carbon heat guard because I needed it.
[Contents] but since it is unknown, I will provide a photo of it before installation.
1.Band Quantity:2pc. Set
2.Bracket Quantity:2pc. Set
3.Bolt Quantity:2pc. Set
4.RubberWasher 4 pcs.
5.Carbon heat guardBody
6.Instruction Manual for English Version
This band can be installed with the Exhaust System installed.
Therefore, the exhaust system will not be pulled out during the process of installing the Heat Guard.
The band is fully loosened and threaded through the bracket.
The rest of the time, Heat Guard is used with Bolt and RubberWasher.
Tighten.
CBR1000RR-R with Slip-on lineTruck di
So, I will install this product.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
The identity of the servo can seraer.
I could not figure out what the servo can seraer.
The object in the photo appears to be adding resistance to the servo.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Quiet Powerful feeling
From AXIS Labs' Slip-on SilencerCarbon
Spec. changed to Slip-on lineTruck di.
The Carbon has a pipe diameter of just over 50mm, and the Truckdi has a pipe diameter of about 60mm.
The latter is quieter and more powerful.
Heat Guard will be attached separately.
Exhaust System band should be a little cheaper to tighten.
View detail
AKRAPOVIC Heat shield
The AKRAPOVIC Racing Line Full Exhaust System is a must have. Of course, the heat shield effect is also perfect. It is a little expensive, but I am very satisfied with it. View detail
I would also like to have a Sticker for regular Material.
I bought it to put on Goods that have nothing to do with Motorcycle at all.
The material is aluminum for Silencer, but I was wondering if there was a Sticker for other common materials such as vinyl chloride.
View detail
Unintentionally smiling
Purchased OEM Exhaust System because I liked its SIDE-out style.
There were also Megaphone from AXIS La and CRT from SC, but I chose this one that seemed to produce as much bass as possible.
Installation is easy, just remove the bolt and apply the EXUP.
The exhaust sound is more bass than I expected and Large satisfied!
The volume is just right, not too loud with Large satisfaction.
I had heard that the R6 Slip-on Silencer was not different from OEM and Large due to the Bento Box, but personally I had the impression that it was quite different!
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
quintessential AXIS Lapo, good sound
When the Valve is opened with the OEM Exhaust System, the sound is just too noisy and it is like a cracked sound. The sound is a bit louder than the OEM Exhaust System, but once warmed up, it is not that loud. Fat and nice sound.
If you've got Engine on you in a residential area, you should leave immediately.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
quintessential AXIS Lapo, good sound
When the Valve is opened with the OEM Exhaust System, the sound is just too noisy and it is like a cracked sound. The sound is a bit louder than the OEM Exhaust System, but once warmed up, it is not that loud. Fat and nice sound.
If you've got Engine on you in a residential area, you should leave immediately.
The instruction manual is in English version, but the Torque is included, so there is no problem if you follow the instructions as shown in the picture. There was a liquid gasket in the box, but I did not use it this time because I had already bought one. The installation requires Torque, so be careful.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
For weight reduction
I never tandem with RR-R, so I installed this one to save weight, and it is compatible with both Normal muffler and Slip-on Silencer. I installed Babyface racing hooks with it and had no problem. The quality of AXIS Lapo is the best. View detail
AKRAPOVIC's MonotoneVERSION
Motivation
I purchased this product because AKRAPOVIC's OEM RedSticker seemed too good for Monotone's Motorcycle.
Was the one you received as per Image?
The size is slightly smaller than the OEM size.
[About how to paste...
Ex-Sticker removal (was not reusable)
Treatment after peeling off (Beauty for the treatment of adhesive residue due to its strong adhesive)
Selection of the position for pasting
Removal of oil (with a neutral detergent for Beauty)
How did it compare to other products?
We were also interested in the horizontal VERSION.
[Others]
Three-dimensional Emblem would be cooler...
If the gray areas are painted with luminescent paint, the scorpion mark will stand out.
I think it is a cosmetic product because I was able to make it over with a small budget considering the price.
View detail
1SizeSmall in size
Was the one you received as per Image?
The color and design were exactly as pictured.
[How did you feel about the Fit?
I found it on Webike and went to three motorcycle shops near me, but none of them had it, so I chose the L size, which is my normal size.
I am 174cm tall and have a standard body type, but as a result, I think that a slightly larger size and a size smaller than my normal wear would be better.
The length and loose fit were moderate and the sleeves were made slightly longer.
How was your experience with it?
The inside is brushed, so not for summer, but otherwise it looks good.
I wear it under my Jacket in the winter.
There is no Protector, so it is better to prepare it separately, etc.
The texture is good, so there is no particular concern about direct contact with the skin.
[Was there anything that disappointed you?
Only the size is slightly large.
What are the specs of the product, such as protector?
There are no specific functions other than Wear.
There is no Pocketetc. to put Protector in.
How did it compare to other products?
It is very comfortable to wear and the price is not too expensive, so I am satisfied with it.
【Review】
I think the Wear texture is quite good.
It is not cheap, so it would be good for Presentetc.
Choose a size smaller than the Large size.
View detail