Reviews
Cospa best
Visor is also nice Parenthesis.
I am about 62 in size and chose XXL and it was the right choice.
View detail
Fits: Others X-Fifteen, Others Z-8
Dimming Type
Enough dimming to be easy on the eyes
I think it is better than the expensive Shield dimming Type.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
It does not mount well.
The genuine brake lever and the product are not fastened well, resulting in a part left on the handlebar. To mount the helmet, the direction was reversed. View detail
Sweat sebum Prevention
I would prefer not to have my own smell, which has been stained over the years, not to say it is offensive.
I bought it because I am concerned about perspiration in the summer and sebum often in the winter, and I want to control the smell as much as possible.
View detail
I like the ease of it
I used to love it when I used to go on my own long-distance expeditions and run Dirt to GunGun, but I don't run Dirt very far these days and stopped using it from Timing when I bought a new Helmet.
I think the reason is that I don't have to take the Goggles on and off as often anymore.
Also, the recent Strap from Goggles is so beautifully designed and non-slip that I felt it would be a shame to replace it with this one.
However, I recently purchased a new off-road vehicle, and after driving long distances, and even more dirt, I miss the convenience of this thing, so I bought it for the first time in a long time.
It is still convenient.
The design is also a bit more Edge and Sharp.
The most important advantage is the ability to quickly attach and detach the goggles with one hand, especially when attaching and detaching the helmet.
Installation is easy.
If you are not familiar with the position of the paste, you may be a little confused. (English Version) If you put it on the street, it's almost perfect.
The following are two things to keep in mind.
1.Strap size of Goggles you want to replace this with (width) to see if it fits.
Most large items can be made with this normal width, but sometimes narrow or wide items can be made with this width. (SCOTT's Advanced Gradeetc.). Since there are
2.I don't think it is possible to convert a Strap with a special installation method, so I think you need to be careful there.
View detail
It would be more convenient to have
There is one on the Body, but I bought it because it is inconvenient to use it without removing the Seat, and also because it is essential when I tandem the body.
I am satisfied, including the price.
View detail
Blue mirror shield gives a slightly yellowish field of view.
[How is it used?
NORMAL is a clear shield, and although I feel that the parenthesis is bad, a darker Mirror shield would interfere with nighttime driving, so I decided to use a Semi-smoke Mirror shield.
Was the one you received as per Image?
I was worried that the color would be lighter than the Image and that it would be visible in its entirety, but when I installed it, it fit perfectly and was a good parenthesis.
Was the installation difficult?
It was easy to replace it by referring to videos on youtubeetc.
At first, it did not go well because I did not understand how it worked, and I had a little difficulty until I learned hang.
How was your experience with it?
The field of vision is bright at night with no problems.
The cheap Mirror shield is [Color] I was worried about the darkening of my field of vision with SmokeBase at night, but this Shield works perfectly fine.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
During maintenance, there are a few troublesome points such as running dirt under running water to prevent Coating from peeling off when cleaning.
▼ Many people say that Coating has peeled off quickly due to rain, etc. In my case, I wipe it off with neutral detergent, but so far I have been able to use it without any problems.
View detail
It's not the same.
Is it really for EX-ZERO?
I'm disappointed with all the gaps.
View detail
Images alone are not good enough.
It is a compromise because it is inexpensive, but I still couldn't tell the Fit feeling from the image alone.
Size:Even though it was Free, it was a little hard on Small.
I regretted buying it.
Well, it is Point payment, so I will compromise, but I will probably not use it and keep it or give it to someone else.
I realized that I should not buy just based on images.
View detail
That's DAYTONA!
I guess it means that DAYTONA is the distributor of MAGGI, but the same size on Amazon is DAYTONA and Webike is MAGGI, then I should buy from Webike. So, I'll buy it from Webike.
I thought it was DAYTONA. Absolutely not." I was not saying that I wanted to buy DAYTONA products, but I wanted to avoid them because I have been making a lot of mistakes buying DAYTONA products recently, emotionally.
View detail
My mistake.
I had posted before that it could not be installed without modification, but this is because I installed the bracket backwards and forwards, so there is no problem at all except that it is difficult to attach the mounting screws. It is a good product. View detail
Processing required
The guide on the body side of the mounting bracket was not attached as it was because the body attachment part of the mounting bracket and the guide on the body side were in contact with each other. The screw fastener of the mounting bracket also interfered with the box part of the air filter when the length of the wrench was too long, so I wondered whether I should cut the wrench or not, but I loosened the box side and shifted it to close. View detail
It is useful for attaching and detaching the helmet!
[How is it used?
ARAI's Helmet is a type of helmet that is fixed by putting the chinstrap through the D Ring, so it takes time to put it on and take it off one time at a time.
KITACO and DAMMTRAX's could not accommodate the width of ARAI's chinstrap, so the only option was KIJIMA.
Was the one you received as per Image?
I thought the Black part was Plastic, but Material:It was Rubber. I think the texture is not bad, even if Steel is unavoidable.
Was the installation difficult?
If you do not bend the bracket between the belt and the chinstrap, the plastic part of the chinstrap will get caught and will not go through. It requires some ingenuity. I used other people's installation as a reference.
How was your experience with it?
If it is so convenient, I wish I had used it earlier. Some people say that the excess string becomes like a whip when cruising at high speeds, but if you fix it with the original plastic part, it will fit with no problem at all.
[Included Parts:were they on?
None in particular, and no Instruction Manual is available, which is unfriendly.
[Was there anything that disappointed you?
Nothing in particular,
I think it will eventually rust because the material is steel, but if it were made of stainless steel, there would be nothing to say.
▼Material even if a little expensive:I would really like you to make a Stainless Steel product. In that case, it may be difficult to process Bracket, but ….
View detail
Convenient
[How is it used?
Bought it to drive around the neighborhood with Scooter.
I bought this product because the size of the cap seemed to be small to reduce pressure under the seat of the scooter as much as possible.
Was the one you received as per Image?
The Black is beautiful and looks great.
The shape was good, just like the picture.
It seems like it would be noticeable if scratched.
Included Parts:, it came with something like a Sponge that allows you to tweak the Size feel.
How was your experience with it?
I didn't care about the fit, since it is semi-helpful, but since the fit is good, I thought the fit was quite good.
By the way, I always wear size M in Full face.
Jaw String is very useful when going to Convenience with the One-touch Snap and Hammer Type.
I often use it when I need two Helmets because it can hold a lot of other stuff when I put it under the Seat.
[Points to note]
How did it compare to other products?
I used to use a Cork and a half with a brim, but the size was too large for me, so I prefer the one I bought this time.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Good feeling on Design
I was feeling uncomfortable with the lock on the SIDE of the helmet, so I bought it because I thought it was an ideal place to lock the helmet. The lock looks great on the helmet, but since I have a box on my V-SX Cali, I can't hang it on the DRing because there is not enough space to operate it, so I hang it on the band. View detail
Installed on current YZF-R25
Adding a Helmet lock would add another 1 pc of keys, so I added a Tanax Wire lock, which I have been curious about for a while.
The brake lever side is slightly adjusted and lowered, but even when fully locked, it could be installed without interfering with the LimitCowl.
I chose the Coil type, but it was harder to stretch than I expected, so I thought I should have chosen the Straight Type.
View detail
For Shopping
I used to use a full face, but when I went shopping on my moped in the neighborhood, a full face would be too large and would get in the way, so I bought this product.
The design is very good and I like the Matte Black texture.
View detail
Lost me with Dark smoke.
After much deliberation with Dark smoke, I decided to go with Merrow because of the nighttime hours.
The Mirror effect was also mellow and hard to see from the outside, so mellow was sufficient.
It is visible even at night and is recommended!
View detail
MONKEY still has a lot to offer.
I think it's good for riding around town. I'm 57cm around the head and the MSize was just right for me.
The design is of course 100 points! It will look great on Monkey Baja!
I've never used a Bubble shield before, but I don't notice any distortion in my vision.
I was interested in how well it was made.
View detail
It's convenient
Installation is as simple as replacing the OEMBolt with the supplied Bolt, Washer, and Collar.
If a Smartphone Holder etc. is attached near the with Handle, the wire length may not be sufficient, so this should be considered.
View detail