【METAL GEAR】Helmet lock Solid Review
Processing required
The guide on the body side of the mounting bracket was not attached as it was because the body attachment part of the mounting bracket and the guide on the body side were in contact with each other. The screw fastener of the mounting bracket also interfered with the box part of the air filter when the length of the wrench was too long, so I wondered whether I should cut the wrench or not, but I loosened the box side and shifted it to close.
Responses
Other reviews
I would also like to see the foundation for Right Side *.
The screws holes for the SIDE vernier mounting bracket on the GSX-8R Tandem Footpeg Reverse side are used for SMART mounting.
As others have mistakenly said, Install the foundation with the smooth side on the outside (the one with the loci on the inside)." The first one with Logo is installed on the outside, and the second one with Logo is installed on the inside. Holder upside down?" I panicked.
View detail
Slightly difficult to install, but functions well
Helmet holder for retrofit type.
Demerit is that it doesn't come with a key from the beginning like Kawasaki does these days...
It is 100 times better than hooking up to a Tandem seat.
Functionality is adequate.
There is a slight problem with the installation, because the Bolt that holds the Plate is close to the body of the car,
In a normal hexagonal Wrench, Quantity:Only 1 pc out of 2 pcs could be tightened.
I think it can be tightened by Offset wrench etc. because there was a gap of about 20mm when I temporarily tightened it by hand.
Also of note, this Helmet holder uses the Bolt hole on the back of the Tandem Footpeg.
Since these are probably bolt holes for installation of OEM SoftSide case brackets, it is necessary to confirm whether they can be used together or not.
View detail
My mistake.
I had posted before that it could not be installed without modification, but this is because I installed the bracket backwards and forwards, so there is no problem at all except that it is difficult to attach the mounting screws. It is a good product. View detail
The only conforming product
It can be installed safely, and it is sent in such a way that it can be attached without Instruction Manual, and I wonder if it is conscientious. (´-) View detail