Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
X-Fifteen SHOEI
Z-8 SHOEI
Product Detail
Specification
[Compatible MODEL]・X-Fifteen
・Z-8
Description
Ultra-High Clarity
Permanent Anti-Fog Adhesive Insert
What is ■ULOOK?
Optical products in various fields
EyewearBrand "ULOOK" is developed by PROUgin advanced material company of optics..
ULOOK Antifog sheet is an anti-fog film that is gentle to the eyes, which is made of TACFilm with a special anti-fog coating applied at our affiliated factory in Japan, and is provided with functions that take advantage of Ugin advanced material's knowledge and experience in the field of optics..
Technology
Hybrid anti-fog
Sustainable anti-fogging performance
High anti-fogging performance without fogging for 180 seconds in the ECE R22-05 standard (Mist Retardant) test..
Ugin advanced material's proprietary anti-fog technology ensures long-lasting high anti-fog performance..
Tool-free installation.
No tools are required for attachment and removal..
It can be attached to your Shield with a little hang..
The layer of air in the clearance between the shield and the film and the humidity control effect of the film keep the field of vision [Color] Clear..
UGAM's proprietary composite MaterialFilm repeatedly absorbs and desorbs moisture to eliminate fogging inside the helmet..
Contributes to safe Riding.
•Mounting Method
Mounting method to Shield
(1)Slightly peel off both ends of the protective film attached to the ULOOK..
(2)Attach the side with the silicon seal so that it adheres to the inside of the shield.. At this time, insert the mounting part of the ULOOK into the pin on the Shield side from the One Side..
(3)While inserting the ULOOK into the pin on One Side, spread the Shield until it is flat..
(4)Attach the Shield to the helmet and check that the silicon seal of the ULOOK is fully adhered to the Shield.. If a gap is found, adjust the eccentricity Pin..
Frequently Asked Questions
Q. Can it be used repeatedly?
A. This product can be used repeatedly by drying it to restore its anti-fogging performance..
Transformation etc.. It can be used repeatedly unless it can no longer be attached by.
Q. How do I take care of it?
A. Clean with a soft cloth soaked in anhydrous Ethanol.
Avoid seal and print areas when removing dirt..
This may cause poor adhesion of the seal and peeling of the printed area..
After cleaning, rinse well under running water, absorb moisture with a soft dry cloth, and dry naturally on a flat surface..
Please dry thoroughly before attaching to Shield..
Q. When polarized MODEL is used, it looks rainbow-colored
A. Depending on the surrounding environment and physical condition, the vision may appear rainbow-colored due to light interference phenomenon..
If you feel any discomfort during use, discontinue use immediately..
Examples of Interference Phenomena
LCD screen (display of cellular phone, tablet, camera, in-vehicle monitor, instruments, etc.)
Sky, scenery, car body, front glass, etc.
Q. Is it safe to leave it attached to Shield?
A. This product should be removed periodically..
If the seal is left in place for a long period of time, the seal portion may stick to the shield surface and not be removed..
Q. I would like to test the visibility before I buy it.
A. Experience Tester is installed in the storefront of stores that handle the product..
Q. Rainwater intrusion during driving in the rain.
A. This product can be used repeatedly by drying.
Remove from Shield, absorb moisture with a soft, dry cloth, and dry on a flat surface before attaching to Shield..
(Deformation etc.. If the product cannot be installed in the "A" position, please discontinue use.. )
Q. There is a gap between the Shield and the anti-fog film.
A. This product expands and contracts due to moisture absorption and desorption..
This may cause gaps and rattling between the product and the shield..
Before use, check for gaps or rattling between the product and the shaft..
Q. I don't know how to install it.
A. Please refer to the installation video for installation..
Please refer to the Instruction Manual of your helmet for the removal of the Shield..
Q. I cannot adjust the position properly.
A. Please refer to the installation movie and install with the Shield further expanded..
Q. Does the color change immediately when entering the Tunnel with the dimmer model?
A. Color change takes time..
In places where it suddenly gets dark, such as in a tunnel, open the Shield to ensure visibility..
Q. If I install a dimmable film on a UV-cut Shield, will the color change?
A. The degree of dimming varies depending on the UV cut amount of Shield..
Permanent Anti-Fog Adhesive Insert
What is ■ULOOK?
Optical products in various fields
EyewearBrand "ULOOK" is developed by PROUgin advanced material company of optics..
ULOOK Antifog sheet is an anti-fog film that is gentle to the eyes, which is made of TACFilm with a special anti-fog coating applied at our affiliated factory in Japan, and is provided with functions that take advantage of Ugin advanced material's knowledge and experience in the field of optics..
Technology
Hybrid anti-fog
Sustainable anti-fogging performance
High anti-fogging performance without fogging for 180 seconds in the ECE R22-05 standard (Mist Retardant) test..
Ugin advanced material's proprietary anti-fog technology ensures long-lasting high anti-fog performance..
Tool-free installation.
No tools are required for attachment and removal..
It can be attached to your Shield with a little hang..
The layer of air in the clearance between the shield and the film and the humidity control effect of the film keep the field of vision [Color] Clear..
UGAM's proprietary composite MaterialFilm repeatedly absorbs and desorbs moisture to eliminate fogging inside the helmet..
Contributes to safe Riding.
•Mounting Method
Mounting method to Shield
(1)Slightly peel off both ends of the protective film attached to the ULOOK..
(2)Attach the side with the silicon seal so that it adheres to the inside of the shield.. At this time, insert the mounting part of the ULOOK into the pin on the Shield side from the One Side..
(3)While inserting the ULOOK into the pin on One Side, spread the Shield until it is flat..
(4)Attach the Shield to the helmet and check that the silicon seal of the ULOOK is fully adhered to the Shield.. If a gap is found, adjust the eccentricity Pin..
Frequently Asked Questions
Q. Can it be used repeatedly?
A. This product can be used repeatedly by drying it to restore its anti-fogging performance..
Transformation etc.. It can be used repeatedly unless it can no longer be attached by.
Q. How do I take care of it?
A. Clean with a soft cloth soaked in anhydrous Ethanol.
Avoid seal and print areas when removing dirt..
This may cause poor adhesion of the seal and peeling of the printed area..
After cleaning, rinse well under running water, absorb moisture with a soft dry cloth, and dry naturally on a flat surface..
Please dry thoroughly before attaching to Shield..
Q. When polarized MODEL is used, it looks rainbow-colored
A. Depending on the surrounding environment and physical condition, the vision may appear rainbow-colored due to light interference phenomenon..
If you feel any discomfort during use, discontinue use immediately..
Examples of Interference Phenomena
LCD screen (display of cellular phone, tablet, camera, in-vehicle monitor, instruments, etc.)
Sky, scenery, car body, front glass, etc.
Q. Is it safe to leave it attached to Shield?
A. This product should be removed periodically..
If the seal is left in place for a long period of time, the seal portion may stick to the shield surface and not be removed..
Q. I would like to test the visibility before I buy it.
A. Experience Tester is installed in the storefront of stores that handle the product..
Q. Rainwater intrusion during driving in the rain.
A. This product can be used repeatedly by drying.
Remove from Shield, absorb moisture with a soft, dry cloth, and dry on a flat surface before attaching to Shield..
(Deformation etc.. If the product cannot be installed in the "A" position, please discontinue use.. )
Q. There is a gap between the Shield and the anti-fog film.
A. This product expands and contracts due to moisture absorption and desorption..
This may cause gaps and rattling between the product and the shield..
Before use, check for gaps or rattling between the product and the shaft..
Q. I don't know how to install it.
A. Please refer to the installation video for installation..
Please refer to the Instruction Manual of your helmet for the removal of the Shield..
Q. I cannot adjust the position properly.
A. Please refer to the installation movie and install with the Shield further expanded..
Q. Does the color change immediately when entering the Tunnel with the dimmer model?
A. Color change takes time..
In places where it suddenly gets dark, such as in a tunnel, open the Shield to ensure visibility..
Q. If I install a dimmable film on a UV-cut Shield, will the color change?
A. The degree of dimming varies depending on the UV cut amount of Shield..
Caution
*Other colors and products may be included in the image.*Please note that the product specification may change due to manufacturer reasons.
Applicable Models
X-Fifteen SHOEI
Z-8 SHOEI
