Reviews
A little expensive, but satisfactory
[How is it used?
Purchased Quadlock Mount to work with Scooter.
Mount, QuadlockMount, and iPhone XS Max on my commute to work.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
It is very easy to use, just put it on the Mirror mount.
How was your experience with it?
Mount is thick enough and strong enough.
Satisfied with the freedom to change angles.
The phone doesn't shake at all.
Black Anodized has been in use for 3 months and has not faded (maybe with lighter colors?).
[Included Parts:were they on?
All parts for installation are included.
[Was there anything that disappointed you?
None in particular
View detail
Good product overall.
It is not a Large problem because it is a simple structure, but the Quantity of Bracket:Pair (for Left and Right) There is no mention of the distinction between the two, and it is not in the Instruction Manual.
I have a 1/2 chance of getting it right, but I thought I could state that much.
View detail
Mount bar
In the summer, the cell phone is free to shift, so we installed a mount bar to accommodate the GARMIN Navigation system. View detail
It is easy to install.
As the Title says, It is easy to install.
Simply insert into the stem shaft and tighten.
The parts themselves are very easy to assemble.
However, there are likely to be individual differences.
Even if the hex on the mount bar side is tightened quite a bit, it rattles a little.
Easy to install and assemble.
Recommended
View detail
As if it were an OEM product.
FORZA required the installation of a Multi Bar because the Handlebar was not exposed.
Initially, we attempted to add an inexpensive Universal-type Multi Bar that would be installed using the Mirror hole.
However, when the Handlebar was turned off, it came in contact with the Screenetc. and was not oriented properly, so we decided to purchase this product.
This product is Exclusive Design and does not violate the design of MotorcycleBody, thus satisfying the Large change.
The price is a bit high, but overall I am satisfied with the Large change.
IMPRESSION DETAILS
0Package
Very careful packaging with SpongeCushion as well.
0 Product quality
No welding or processing problems
Good paint job.
0 Installation
Easy even for amateurs without any problems
◯ Usability
It is good that the location study seems to be well done.
I personally think it's a good position, out of the way.
Processing of 0Cover
Endurance sells a special modified Cover, but I have modified the Body.
The instruction manual includes instructions for processing the body (size of the notch is indicated, etc.), and processing is possible using a nipper, cutter, and sandpaper.
I think it's better to start out small and then cut around the edges.
Because it was cut by Nipper, there is a white mark on the CoverBody, but it is not noticeable and I don't mind it.
Related to 0OthersCustom
ETCAntennas are installed in the Handlebar Center Cover with no problems.
Wiring with DAYTONAUSBCable and ETCAntennasCable attached to Multi Bar.
The product was installed by drilling a hole in the MotorcycleBody (plastic), which is not too difficult to process.
In this case, we took care to drill the smallest possible hole, as drilling too large a hole can cause strength problems.
Recommended Point
The large size and length of the bar is the smallest necessary, and it is a functional product that does not destroy the design of FORZABody.
View detail
Looks rigid.
We hesitated with DAYTONA, but chose this one, which looks rigid.
If the Smartphone Holder is attached to the bottom, it is too far forward, and if it is attached to the front, the Meter is not visible.
I am thinking of extending this and attaching a Bar Holder to it to make it an easy-to-see Position.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Installation is easy
There is nothing difficult about the installation.
Before the work, the tank is cured with a thick toweletc. to prevent wounds.
(It's just a small step to avoid the extra time, effort, and expense.)
1.Temporarily assemble the Mount Bar and Mount Bracket.
2.BoltQuantity near the tank of the Handlebar Holder:Remove 2pcs.
3.Assembled the collar, temporarily assembled Mount Bar + Mount Bracket, Flat Washer, and M8x45Cap bolt to the car body in this order.
4.Temporarily tighten Bolt on each part
5.Bolt tightening in each part
This completes the process, but there is one point to note.
Tightening torque for M8x45 cap bolt. The specified tightening torque in the Instruction Manual for the product is 30 N・m, and the same value is given in the Service Manual. However, do not tighten the bolt all at once, but tighten it while observing the situation.
The tank-side joint surface of the upper handlebar holder has a gap with the tank-side joint surface of the lower holder. Since the upper holder is cast aluminum, it may break when tightened in overtorque.
The appropriate tightening torque varies depending on the bolt material, strength, material to be fastened, required fastening force (axial force), etc. Of course, there are standard tightening torques. Of course, there is a standard torque for fastening.
Since this is an important part of the steering, we recommend the use of proper fastening tools and not relying on intuition as much as possible.
The same situation may not apply to other vehicles of the same model and year.
To be sure, we checked the torque of the Handlebar Holder Fixing Bolt on the actual vehicle before disassembling.
All four were 20 N・m without lubrication. The target for Torque tightening was 20 Nm.
In the photo, both the cap bolt and button cap bolt are black.
This is because we changed the color when we changed to the same material as the OEM Handlebar Holder Fixed Bolt.
The OEM Bolt is SCM435 (10.9T) trivalent ChromateWhite.
The Bolt in the photo is SCM435 (10.9T) trivalent ChromateBlack.
View detail
Made by stable DAYTONA
Easy to install, good material quality. View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
Refreshing around Handlebar because of Short Type
[How is it used?
Purchased to attach Smartphone Holder in Touring
Was the one you received as per Image?
It's just like the image!
Was the installation difficult?
It's very simple, but requires a product sold separately.
How was your experience with it?
I am glad I went with the Short Type and the Handlebar area is more Refreshing than the one I had on before.
View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Easy installation, excellent effect, good cost performance, the only bad thing is the appearance?
I purchased and installed the Smartphone Holder and USB power supply.
Installation is completed by removing the Mirror and co-tightening it together with Mirror.
Installation is easy and cosmetic.
However, in theory, the Handlebar will be heavier and therefore less operable.
Refreshing appearance is also reduced.
This product is recommended for those who use Smartphone for city driving and touring.
View detail
Fits: HONDA CRF250RALLY S, HONDA CRF250RALLY, Others , HONDA CB1100 RS, HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA CBR250RR(2017-), HONDA CT125, HONDA PCX125, HONDA PCX160, KAWASAKI Z1000 (water-cooled), KAWASAKI Z125 PRO, KAWASAKI NINJA2 Helmet50RSL, SUZUKI GSX-S1000F, YAMAHA MT-03 (2015-), YAMAHA MT-25, HONDA CB150R, HONDA CB300R
To install Drink holder.
This is an introduction to install a drink holder on a CB250R.
The height of the handlebar of CB250R is low, so a drink holder can be installed as it is.
When the Handlebar is cut, it contacts the Tank Cover.
For touring purposes, a drink holder is essential for me.
This product was used to gain height for installation.
I don't want to pinch Mirror.
We selected an item that can be attached to the Master CylinderClamp.
When installed in the proper orientation, it comes to the front unexpectedly.
Mounted in opposite directions to reduce pressure.
One drawback.
Why are Bolt, Washer and color Silver when BodyBlack?
Even though other similar products from DAYTONA use BlackBolt.
That is my only regret.
View detail
Fits: KAWASAKI Ninja ZX-6R ABS, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-6R ABS KRT Edition, KAWASAKI Ninja ZX-6R KRT Edition, KAWASAKI ZX-6R
I didn't use the key side.
Purchased to mount SP CONNECTO's Smartphone Holder.
The key side is not used because the operability of frequently used keys deteriorates significantly.
The paint on the Black is also weak and has partially peeled off due to slippage.
I would like to replace it if there is another option.
View detail
Better visibility, but also vibration...
The phone is positioned at the top of the Screen, making it easier to see.
However, it is harder to see than when I had the Smartphone Holder on the Handlebar before because it shakes with vibrations while driving.
The screen is fixed by a rubber bush, so I guess it can't be helped, but it might have been a little bit of a mistake...
View detail
Fits: HONDA CBR600RR, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-R1000
For effective use of Stem hole
DAYTONA DAYTONA:78412 Multi Bar Holder Purchased with Stem Clamp.
I purchased this Smartphone Holder to make effective use of the Smartphone Holder with Stem hole.
The installation itself is very easy and takes less than 30 minutes.
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
Required for fixing Smartphone Holder.
DAYTONA DAYTONA:I purchased this together with the 95444 Mount Kit Multi Bar Holder.
Or rather, it is installed in the Stem hole, so it cannot be installed unless purchased together.
The installation itself is very easy and can be completed in 30 minutes.
I installed the Smartphone Holder and had no problems at all.
View detail
Fits: Others Master Cylinder Installation Pitch 30-32mm Vehicles
Easy to use!
I use the long one on the right and the short one on the left, and it is very convenient and does not get in the way. It is easy to forget to attach the collar when installing. View detail
If you want to Refreshing around Handlebar!
I was looking for something good for mirror installation because of the clutter, and I found this product. It is easy to install, and I use it with TaBrett as Navigation, and it does not cover the Meter, so it looks great! View detail
Smartphone Holder accompaniment
The OEMHandlebar is lonely with a gaping hole in the center, so we added a bar.
The CT125 is the same thickness as the Handlebar, which is convenient because it is hard to attach a Smartphone Holder with the OEM Handlebar.
I heard that we cannot expect an increase in rigidity, but I feel that the vehicle is not particularly susceptible to vibration from the start and that the strength of the vehicle has indeed been achieved considering its physical condition.
View detail
To ride Motorcycle for a day longer!
I really wanted to go a little higher, but Motorcycle these days is Wire, Cableetc.. I had no choice but to reach for this product because I could not extend it. The texture is quite good and the feel is better than I expected. The installation was just as described in the reviews. I think it is better to replace the entire handlebar for parenthesis, but I want to ride my motorcycle for a day longer than to hurt my body with unreasonable posture, so I think it is possible with good cost performance! View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Easy to install! Many uses!
Was the one you received as per Image?
As per Image
I own several Motorcycles and have installed them on all of them.
Was the installation difficult?
It's easy
How was your experience with it?
For mounting a camera, a smart phone, etc... It increases the convenience of the Handlebar and its surroundings.
The weight is not a concern. Wind and weight do not affect Handling.
View detail