Reviews
Fits: HONDA CB400SF HYPER VTEC SpecIII, HONDA CB400SF HYPER VTEC SpecII, HONDA CB400SF HYPER VTEC Revo, HONDA CB400SF, HONDA CB400SB, HONDA CB400SB, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1100EX, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100EX BLACK STYLE, HONDA CB1100BLACK STYLE
Nice...
I replaced it with a Sintered pad because the Brake squeal would not go away and it was less expensive and seemed more durable.
The pad before replacement came with an unknown manufacturer, so there is no comparison, but it works and does not squeal as usual. 。
Control is much better than I expected, and the effectiveness changes with the amount of force.
It seems to be a bit aggressive to Rotor, which is a concern, but it was a good decision to replace it.
View detail
Fits: HONDA DAX125, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA SUPER CUB110PRO
Mounted on CROSS CUBJA60
Installed for dress-up and ease of gripping.
My hands are on the Large size, but OEM is a bit far away and my hands get tired after riding long distances, so I bought this. I am glad I replaced it.
View detail
![ERSeriesChain 520ERVT Gold [with Clip(FJ)Joint].](https://img.webike-cdn.net/catalogue/images/63583/520ERVT_G_G_P_TS.jpg)
Fits: HONDA CRF250M, HONDA CRF250R, HONDA CRF450L, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, SUZUKI RM-Z450, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX450, HONDA AX-1, HONDA CR125, HONDA CR125
I bought it for forest road Touring.
Gold plating is beautiful. Expensive, but I expect durability. View detail
Fits: KAWASAKI KR-1/S/R, KAWASAKI KLR650, KAWASAKI KLR650, KAWASAKI KLR650, KAWASAKI KR-1/S/R, KAWASAKI KLR650, KAWASAKI KLR250, KAWASAKI EN500, KAWASAKI CS250
Might increase fuel economy?
The FSprocket has not been replaced yet and has not been run much, but it feels good.
The Meter reading was previously 4000 rpm at 60 km travel, but after the replacement, it became 3500 rpm and I was able to travel up to 6th gear without any discomfort.
Next time I will replace and adjust RSprocket and see.
View detail
Recommendation for those who are anxious to draw a Maintenance Stand alone!
Although an instruction manual is included, it does not explain the details of how to assemble the unit, which was confusing at first. I would have liked to have a guide to the screw holes to be used for the approximate number of inch tiers.
There was a product video on how to use and assemble the product, so I checked it out and assembled it. The video was very helpful.
The NINJA1000's front tire (120/70Zr17) was firmly secured and stood on its own. It also felt stable when lowering the bike.
I used to do maintenance only with the Rear STAND, but when I lifted up the bike by myself, I didn't hang it properly and it fell over. I wish I had bought it before I stumbled...I would like to recommend this product especially to those who work alone to avoid damaging a large motorcycle.
View detail
To prevent Axle Nut from loosening on older cars.
I used this as a split pin to prevent the Axle Nut from loosening, which is common on older cars. I always do this because it is easier to purchase than to look up the OEM Product No. and order one at a time.
For Motorcycle, the 3 sizes included in this kit should be sufficient for Large.
View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
Advantages of Maintenance
I have been using DX since its release. I don't mind maintenance, but sometimes I get tired of doing it when I'm busy with the weather, so it's nice to have less frequent replacements. Fuel consumption and running performance do not change drastically. View detail
Fits: DERBI Urban, BMW R69S, CAGIVA CUCCIORO, DERBI RD-2Country, DERBI AVENTURA, DERBI HUNTER, DERBI Variant box, DERBI Variant boxSportsR, DERBI Variant boxTop, DERBI Phoenix・FDSSUPER・StartDS, DERBI Flux, HONDA MB50, HONDA MB80, HONDA MT50, HONDA RACCOON, KAWASAKI 125TR, KAWASAKI 250TR, KAWASAKI 400SS, KAWASAKI 90S, KAWASAKI 90SS
regular product
A classic Plug for KawasakiKH, I can't think of anything else ? View detail
Fits: HONDA CBF1000, HONDA NC700X, HONDA NC700SXL TYPE LD, HONDA NC700S, HONDA CBR250R, HONDA CBR250R, HONDA CBR1000F, HONDA CB650F, HONDA CB500 F, HONDA CB400X, HONDA CB400SF Ver R, HONDA CB400FA, HONDA CB400F, YAMAHA WR250X, TRIUMPH Tiger 800XC, TRIUMPH Tiger 800, TRIUMPH Thruxton 900, TRIUMPH Thruxton 865, TRIUMPH Street Twin 900, TRIUMPH Scrambler 865
Brake to JackKnife if you apply it strongly ".
This was the first time for me to use the Metal pad, but I have the impression that it works harder than the previous Golden pad.
I grabbed Lever with my usual BrakePoint and it worked so well that I JackKnife'd it unexpectedly.
We are still waiting to confirm the durability of the product, but as for the effectiveness, we are satisfied with it.
View detail
Fits: SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI Verde (VERDE), SUZUKI Verde (VERDE), SUZUKI Verde (VERDE), SUZUKI STREET MAGICII (STREET MAGIC II), SUZUKI STREET MAGIC (STREET MAGIC), SUZUKI STREET MAGIC, SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIL COMBINATION BRAKE (LETS Two Elle Combination Brakes), SUZUKI LetsIIL (LETS Two L), SUZUKI LetsIIL (LETS Two L), SUZUKI LetsIIG (LETS Two Gee), SUZUKI LetsIIG (LETS Two G)
Excellent braking performance.
I used to use Shoe of other brands, but this time I used NTB for the first time. I don't feel much change in the effect, but the brake noise during operation has been eliminated. It feels good. View detail
Fits: Others Wire clutchCompetition model, SUZUKI RMX450, SUZUKI RM-Z, SUZUKI RM, KAWASAKI KLX450R, KAWASAKI KX-F, KAWASAKI KX, YAMAHA WR-F, YAMAHA YZ-F, YAMAHA YZ, HONDA CRF-X, HONDA CRF, HONDA CR
Definitely lighter.
I had been using OEM Clutch for a long time, but it was too heavy and tiring, so I replaced it with this one.
To install, remove all the originally attached clutch lever and holder, leaving only the wires in place, and then install.
The dust cover is screwed on, so it must be disassembled and assembled before installation.
Also, the Clamp portion is rotated so that it is less likely to break than a regular Lever or OEM.
The Nut that adjusts the distance of the Lever is also hexagonal, a spec. that can be firmly fixed in place.
I prefer to set it quite far away, but it feels quite light when I pull the lever, I don't know if it's because of the Ratio or some other secret, but I think you can feel it the moment you hold it.
View detail
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
Idling stabilized?
I changed the oil as part of maintenance, and it seems to have stabilized the idling, but I don't feel that the power is increased. I really don't know if the period to change the oil was too short and the oil was not so deteriorated, but it is an old motorcycle and I will replace the oil as soon as possible. Next time I will buy a Torque wrench and tighten it with the specified Torque. View detail
![VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Maximum speed has increased ?
Conversion to 520 Chain (and Sprocket), speed was up in almost all areas at the same RPM as before?Chain lightening was more effective than poor modifications. View detail
Fits: YAMAHA YZ125, YAMAHA WR125, YAMAHA TY250 Z SCOTISH, YAMAHA DT200 WR
Quickly to run
With the Front12T, you will be running Quickly, both on forest roads and in town.
It is affordable and I feel the effect of the replacement.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
Tail Bulb replacement for KSR's Fender Eliminator Kit
I purchased a used KSR80, but the previous owner installed a Fender Eliminator Kit, and the tail lamp is a Lucas type.
There was a Trouble with Tail Bulb immediately after purchase.
I removed the Lens to see the model of the Lamp to replace it, but unlike the usual Double Bulb, the head was a Small Rhinoceros Bulb.
This Type was not sold at Home center or Car Shop 。 Maybe MotorcycleParts specialty stores have them, but I can't find any near me. 。
However, because the length of the Tail Bulb was different, it interfered with the Lens, causing the Lens to chip, melt, and consume more power due to its higher wattage.
I had put it off because it was inexpensive but the shipping and other things made it needlessly expensive, but I had some shopping to do at WeBig, so I bought it as a package deal.
After installation, there was no interference (obviously), and since the Watt number was lowered, the power consumption was also lowered, eliminating the concern factor.
I am planning to eventually switch to LEDs, but there is a barrier of full-wave rectification, so I may end up putting it off.
View detail
Great grip comfort
The OEM Lever for the SV650 is a good or bad bike Level, but this Lever not only looks cool, but I was surprised at the high quality when I held it for the first time after installation!
Installation is easy and takes less than 30 minutes if you have experience with grease up and lubrication of Lever!
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA650R, KAWASAKI VERSYS 650
For NINJA400R
Installed on NINJA400R.
Since it is an important safety part, we asked Motorcycle shop to install it.
The feel of operation, texture, etc. was perfect without any complaints.
If you are not confident about installing it yourself, ask a professional contractor to do so.
View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
It may be a classic.
I bought this one because a certain lever that does not break interferes with the CloseHand guard on a 4Finger. If you care about the appearance, you should choose the cut-out type, but if you don't want it to break during the race, you should choose the Forged Type.
The exterior is of high quality, as one would expect from Zita. Installation is a simple and easy process. Adjustment is stepless, but requires a tool, so it is a little troublesome.
I have fallen a few times since installation and have not had any breakage or other troubles.
View detail
Firmly.
I could not tell how light the Clutch was, but the build quality was solid, as if it were an OEM product.
Durability, that is the most decisive factor.
View detail