Reviews
Fits: YAMAHA MT-09, YAMAHA XSR700, YAMAHA XSR900
XSR900
Great handlebar for xsr900. Install was great and easy. Took about an hour to do. Cheap and very fast shipping. Highly recommend View detail
GOOD
GOOD View detail
Before Separate handle
Purchased to reverse mount on SR400.
When changing the position from NORMAL to a separate handle, I thought about using a separate handle, but then I took a breath. This product was the best for making use of the NORMAL Throttle Wire, Clutch Cable, etc. to tilt the car forward. There was no problem with the position, but I was not satisfied with the appearance, so I ended up using a separate handle. Positioning is different from the Separate handle, which is clipped on to the Handlebar above the Top Bridge, so it is necessary to check the interference between the Switch box and the Tank.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey
เป็นแฮนที่ใช้งานได้อย่างดีจับสบาย View detail
Handlebar without a doubt
Unlike the cheap Xhua products, I feel that the anodized surface is good without unevenness or distortion. Also, the feel of Brace is good. View detail
Would it be possible to install it on the GSX-S1000GT?
The handlebar was designed for GSX-S1000, but I moved the hole in the handlebar to the Left Side and it fits perfectly. I also changed the bar end weight, so there may have been a synergistic effect. View detail
Black Pill Installation
About Pin for Switch box 。 On the Left (Blinker) side, it is enough to measure the distance of the hole from the end of the STD Handlebar, but on the Right (Kill switch) side, the switch box is Large, so if you take the distance from the end, you will not get Mirror. 。 Rearview mirror stay was temporarily fixed and the pin position of the switch box was reflected from there. 。 We wanted to minimize the overhang as much as possible.
The inner wall of the BackMirror Clamp was filleted to avoid the SWCondor welds.
Drilling a pin hole can be done within 5 minutes without special tools if you turn the drill slowly after punching a pin.
I can open it. 。 When drilling, the side to be drilled was placed on top and the CenterPost was tightened.
Since the handlebar grip was still new, a long Phillips screwdriver was inserted through the gap to create a gap, and parts cleaner was sprayed on it to remove and reuse it.
After installation, it is clearly comfortable in terms of Position.
View detail
Just right with a slight forward lean.
The original product Specifications is for JC75, so it can be used for JC92.
When installed, the height seems to have been lowered by about 20mm.
Thanks to this, I can lean forward a little more and enjoy driving even more.
The position during cornering is especially well defined.
Installation is not particularly difficult, and even first-time users will find it relatively easy.
It is easy, but it is safer to have the right tools.
Also, there is a risk of damage to the tank and meter area,
It would be better to work with dustcloth or similar covering.
The handlebar itself is of good quality and the glossy black paint is beautiful,
Recommendation.
View detail
Terribly easy to ride.
The OEMLow Handlebar is not too low, but for some reason I didn't feel comfortable with the position, so I changed to their Touring bar, but this time my posture was too upright and it was difficult to ride.
This England Bar has not had many impressions, but why doesn't everyone put it on? It is the best position to be in!
The height is lower than the OEMLow Handlebar, but I was impressed with how much easier it becomes to handle when it is in the front. I was impressed with how much easier it is to handle when the handlebar is in the front. I think this is also recommended for those who feel uncomfortable with the handlebar up type.
I think you will be satisfied. Vibration is the same as the OEMLow Handlebar, but the Bar End can be added, so depending on the weight, it may be less than the OEM. I am 182cm tall and this is my impression.
View detail
Handlebar
Easy mx bar installation. Nice color. View detail
![[Xess] YB Narrowed Handlebar](https://img.webike-cdn.net/catalogue/images/12600/3-k-t_00092_TS.jpg)
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Nice aperture.
It's nice and well squeezed. View detail
For Z125 Pro
The Rear Sets and STD Handlebar were not in the right position.
I bought this Handlebar around April 2022, but the color I wanted:Black's delivery time, at that time, was more than six months,
We had no choice but to use a color with a fast delivery date.:Chrome plating was used, and the Fork cap and Stem Nut were replaced,
I think the appearance of the PlatingHandlebar is no longer incongruous.
(Photo 5) Plating color plastic cap of (Photo 4) The first one is attached to the position of the second one, but one of them came off at some point,
Posh Bar End (031072-11-10, color) with the same Handlebar diameter:Titanium) was mounted in that position.
Handlebar color:Also for Black (Photo 5) It has a Plating color Cap of (Photo 5) Cap of the
If you want to change the Handlebar to the same color or Colorful, I think you can pull out the Cap and change to this kind of Bar End.
When installing the handlebar, I used a Made by HURRICANE 25mm Handlebar Up Spacer that I originally had.
As a result, when the Handlebar is cut off at the end with the foot in the Knee grip position, Tank,
The Bar End did not hit the foot, and a Clearance of about 2 cm was created.
The passenger's posture is tilted forward. On the other hand, the arms are extended, so the upper body is no longer cramped.
I have used it for 1 year and 2 months and I am satisfied with it!
View detail
W650 gets a British look and an old car feel!
Was the one you received as per Image?
Material more than Image:Polishing was beautiful.
Was the installation difficult?
If it is installed from OEM low handle type, Cable and others can be kept as it is,
It is easy. However, it may be troublesome to handle Handlebar Up TypeType.
Bar Quantity:Pair (for Left and Right) The switch mounting area of the "B" has a hole in it, so it was hassle-free to bolt on the switch.
Same as OEM, Clamp section is 1 Inch, Grip section is 7/8 inches, so Switch and Mirror sections
Everything was easy with Bolt On (Large is the one that doesn't need Spacer).
How was your experience with it?
It is about 5cm lower than the OEMLow Handlebar, and about 5cm closer to the front, and for me, who is 168cm, it is about 5cm lower than the OEMLow Handlebar.
It felt just right, and there was no discomfort at all from the OEM; in fact, it felt more comfortable this way.
[Attention item].
The OEM low handle type has an inner weight to prevent shaking.
It is not included because it is a regular SUSPipe.
I think Inner Weight (I think a heavier one is better) of another Parts is essential.
If you don't put it in, the blur will probably be Larger than OEM.
View detail
CondorSW
With the OEMHandlebar, my arms were open and I was leaning forward halfway, and after an hour my arms were numb and my back was a little sore, but this has improved!
The position of the brake lever is a little delicate, but I think it can be handled by Lever.
I am installing it without Spacer.
View detail
Good to know
Good thing there is a Switch hole. View detail
ZETA is a safe bet!
If a hand guard is installed, it would be easier to make minor adjustments if the handlebar area is made of ZETA. View detail
Stiff shoulders and arm pain are gone.
[How is it used?
Mounted on GSX-S1000 (2BL-GT79B)
Was the installation difficult?
There's nothing wrong with pontooning.
How was your experience with it?
It was an OEMHandlebar for about 2 years and I regret that I should have replaced it sooner.
[Included Parts:were they on?
No problems
[Was there anything that disappointed you?
If I had to say, I would have liked another 10mm stop.
Other items that would be helpful
[Notes]
Install the black-colored handlebar slowly and carefully; the wound is quite noticeable when the gold-colored handlebars hit each other.
View detail
Fits: HONDA CB1100, HONDA FTR223, HONDA NC700X, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, Others , YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
I was able to achieve my ideal posture.
I am very happy because I got the Riding position I was looking for, and I enjoy long touring and driving on mountain passes. View detail
Normal Handlebar
Very decent Handlebar at an affordable price
There is quite a wide variety, so you will be able to find something that suits you.
View detail
Good quality handlebars
Good quality handlebars. The orig.bar ends/vibration dampeners dont fit anymore.this should have been mentioned in the Description ! View detail