Reviews
in carburetor's Size
Quantity of Gasket in the most MAJOR places:Set....it comes with a sticker of rather large size I feel like TMR is a good place to buy something different depending on the size of the Carburetor
It would be helpful if you could organize and list the part numbers by caliber, as they are set up in quite a few details I think
View detail
Single Item sales
For vehicles where TMR Carburetor is the OEM supplier, the vehicle Unit Purchase may not be possible in the Manufacturer's Parts List I think there was one In that case, maybe the Needle Valve and Valve seat area is an ASSY or I think it was
If you only need an O-ring, it's very nice to be able to buy one from 1pc. at Rose
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Accelerated Pump
TMR Carburetor, imprecise as an O-ring for an accelerated pump
I don't want it to degrade and have a leak when the acceleration pump is activated, so I feel like it's in bad shape If it is, replace it just in case With an accelerated pump, the accelerated pump must be operated first before paying attention to the jet and needle catching area You'll have to check if it is, or not before you get into it
View detail
Equivalent to OEM Parts
As an O-ring for the Float valveSeat for Carburetor for Yamaha I bought it from OEM Parts because I couldn't get it from this O-ringSingle Body It is very expensive, but the price is reasonable because I was able to purchase Mikuni parts and The dimensions are the same The dimensions are the same and it is used for the same purpose as the original carburetor, so it has no problem with oil resistance It is
I'm going to buy and replace it with every Carburetor overhaul This is very helpful
View detail
Setting essentials
After all, jets are limited to manufacturer OEM products
The engraving is easy to read and the texture is nice
Setting also came out perfectly
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
self-satisfaction
YOSHIMURATMR-MJN standard Red Anodized drain bolt is my hobby I changed to regular TMR drain bolts because they don't fit
However, because it costs more than $1,000 Bolt1pc, it takes time to get to the point of buying it It took
It's a Aluminum Billet, so it looks good
View detail
It is very helpful to buy it in an O-ring Single Body
Float sent to the fuel carburetor of the Carburetor for the YamahaFZr I bought it for the Cup O-ring of valve I have been looking for a standard O-ring, but I could not find a good size O-ring I was looking for a standard O-ring, but I couldn't find a good size O-ring If you buy a 4 cylinder motorcycle from Parts, it becomes an assy purchase, and if you buy a 4 cylinder motorcycle, it becomes very expensive It will be When I bought it to try it out, Size (Press fit) The O-ring is originally for Carburetor, so the Material is also for Gasoline This is the original O-ring for Carburetor, so I think the material is also for Gasoline I think
I would like to buy and replace it every overhaul because of the low price
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
(it would be inconvenient to) need
maintenance of carburetor, removing the Float chamber in Settings as many times as possible I'm worried that if it's damaged, you won't hesitate to replace it, because it will inevitably get damaged, and if it's not damaged, you won't hesitate to replace it It is
View detail
good
Z400 is an injection vehicle, but it has a throttle wire system, so it is possible to use a screw Idol adjustment is available
In order to use it with Gymkhana, Idol adjustment is indispensable, but NORMAL is adjustment Screw Since the screw is fixed by a lock nut, it is not easy to adjust I was worried about whether the size would fit, but I was able to use it with Screw size M5P0.5 with no problem has been created
View detail
good
I used it on my Z400
This is for adjusting Idling for use with Gymkhana
It seems that recent Injection cars do not have an Idling Adjustment Screw
I was worried about whether the Screw size would fit, but it did Pitch 0.5
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Thank you for stocking all this stuff
I bought a YOSHIMURA TMR used, and naturally it was not a product that could be used as it was You will need Repair Parts
Normally, I would go to a motorcycle shop or mass merchant to order it, but the one I got was I need to use it right away
I can't wait for it to arrive in stores lol!
I did a search on We-Big and they have all the ShortParts I need in stock! It was
When you purchase, you can check the Parts List diagram and part number, so you can see the part number when you receive it It wasn't I don't think it's a big deal
Thanks to the fact that they even stock Repair Parts like this one, we can install it the next day! I was able to work up to the engine start
Find out if the Large and a half of people who buy by mail order are in stock or not, and if they'll be available soon There should be
It's still strong to have an inventory 。 Even if the manufacturer or store doesn't have it, We-Big often has it in stock I'm sure you will
It's always helpful
View detail
The accuracy of Mikuni is the best!
I bought it for setting of TMX30.
Although the precision of Other Brand Product is not bad, I made it to MikuniOEMJet because I hate it if it is slightly different from the accuracy of Mikuni.
View detail
Accuracy of Mikuni
I bought it for setting of TMX30.
Although the precision of Other Brand Product is not bad, I made it to MikuniOEMJet because I hate it if it is slightly different from the accuracy of Mikuni.
View detail
Goods are good. Correspondence is bad.
After asking for an estimate of 40 Φ, I chose 32 Φ by mistake for a reply with Size selection. I think it is common sense to reply only the things I asked as an estimate. Because it opened, I can not convince you that it can not be returned. View detail
It will take some time before it arrives.. Those who have time to spare
Order is 2017. 12. 22
I received it, 2018. 02. 08
If you buy it at OEM, I think that it will arrive as soon as possible.
Because I am not impatient, I have decided to wait quietly
It seems that it takes time for other people to refer also to Impre.
As the product, the same type as MikuniOEM BST
MADE IN JAPAN
Looking at the price of Yamaha OEM
You can buy it with half the gold price.
View detail
No problem.
Purchased as YOSHIMURAcarburetor's for Repair. From the products we found on other sites, we got it with affordable Gold amount. Moreover, since the stock is solid and the delivery system is good, it is very handy when in a hurry. The quality of the product is no doubt! Because it is used in Race, I will regularly purchase it. View detail
Essential items for YOSHIMURATMR 40 MJN!
I attached it to TMR40MJN of YOSHIMURA.
TMR is treated as a Racing cab, so Idling's stability is bad (><)
Secondary Air problem caused by lean of famous VSeal (It will almost certainly develop on long-term use, add Shim etc etc etc. If we do not take countermeasures, it will not cure, but because it is a matter of design (^_^;) Moreover, it is unreasonable to say that disassembling around VSeal will make Manufacturer repair impossible) ? ? ? especially this day LongScrew comes in handy because Idling tends to become unstable especially on cold weather such as winter season. ? ? ? ? ? ? ? ? ? It is a necessity for CenterLINK carburetor of 4 (^ ^)
Wait for signals etc if installed. You can fine-tune immediately at the time of Idling of the town, and the city ride will be quite comfortable.
Although Spring is not attached, there is no problem if you cut the matching Spring of the diameter to the optimum length.
View detail
Goods are good, but
Please pay attention to the delivery system on Wei Big side is a Large problem. I purchase Jet collectively and buy it Large and I will ship by Yu Packet due to impossible reason for product protection because packing is Small despite becoming a reasonable Gold amount. There is no warranty, shipping is also late, despite being put in a mailbox. Please stop using free shipping because you stopped free shipping. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
XJR400 (RH02J) in carburetor
XJR400 (RH02J) In OEM Parts Number, only PS and Set can not obtain Washer but it is expensive, but if you use here you can purchase only the necessary Washer cheaply. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
XJR400 (RH02J) in carburetor
XJR400 (RH02J) In OEM Parts Number, PS and Set can only obtain O-ring, but it is expensive, but if you use here you can purchase only the necessary O-ring cheaply. View detail