Reviews
Match the color.
Product Name
ACERBIS ACERBIS TRI FIT Hand Guard TRYFit
Item Number
AC-16508RD
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
15 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I was looking for a red hand guard and chose this one because it was highly rated.
Was the one you received as per Image?
It was just like the Image. Cool looking
Was the installation difficult?
It is not difficult because all you have to do is fasten the screws.
How was your experience with it?
I am very satisfied with the product and would recommend it to anyone who is looking for a hand guard.
[Included Parts:were they on?
There were Instruction Manuals for handling Seal, etc.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Not Standard Size
25.2mm, so it will be sandwiched between the rubber plates.
However, Rubber sticks out, does not pinch properly, etc. Stress builds up subtly.
In the end, I managed to attach it, but I was not satisfied with the wobble, the subtle texture, and the fact that it was rather large for a skimmer Switch.
I think it would be better to use a 22mm size made by NAKA0 with waterproof and wiring processing...
Well, it's too much trouble to replace it, so I'll use it until it breaks.
View detail
Fits: YAMAHA XJR400R, YAMAHA XJR400, YAMAHA V-MAX 1200, YAMAHA SRV250, YAMAHA SR400, YAMAHA FZR400, SUZUKI GSF1200, KAWASAKI ZR-7/S, HONDA Monkey BAJA, SUZUKI GSF750, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR1200R, YAMAHA XJR1200, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX400, YAMAHA FZR250R, YAMAHA FZ400, SUZUKI BANDIT400
HURRICANE triangular table spindle nut
Exquisite workmanship, cheap price, good materials, beautiful colors, very accurate size, easy to install, and fits perfectly in the car View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
I'm writing well.
It's been a while since I bought it, and I thought it was necessary to change it at first, but the more I use it, the more satisfied I am with the dress-up parts. The regular genuine lever was really uncomfortable. It's far from my hand and the lever is thin. It was hard because I kept turning off the bike with the genuine lever, but it's so nice that it's almost gone after changing it. I highly recommend it. View detail
Very beautiful Red
I like the design and practicality.
It can reduce finger pinching in the event of a fall.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Cool with good color
Easy to install, easy to grip and firm compared to OEMLever. The result is better than the price. View detail
Fits: YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6N, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6
Great
great replacement fits my boom 250cc, you should tottaly get it if u ever break ur brake lever, great item give it a 5 star review View detail
Poor return of Engine Starter Motor
After a year and a half of use, the return of the Engine Starter Motor was poor and the CellMotor kept turning.
The same thing is written in the review of KIJIMA's Engine Stop Switch, so things seem to be the same.
For now, I did a Silicon spray and it came back, but I'm sure it will reappear after a while.
It is inexpensive, so let's just use it as such. (Laughter)
View detail
This is a good one:??
I thought it was easy to grip from the time I tried it at the store, but I was skeptical because I had not actually driven it, but even after using it on a 400kmOver day trip Two, I am not tired at all! View detail
Mounted on ADV160
I put it on for spring, summer and fall.
The design is good, and the small size allows for good ventilation.
It rarely runs Off, but it suits ADV!
I chose Black, but a matte color would give me more options.
View detail
Throttle Cable tip processing was messy.
I was satisfied with the quality of the product, but the ball on the Throttle Cable attached to the Throttle was poorly machined on the Throttle mounting side, and it did not fit without modification. View detail
Fits: KAWASAKI estrea, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W650, HONDA Shadow 400, HONDA GB250, HONDA FTR223, KAWASAKI Estrella RS, KAWASAKI Vulcan 400, KAWASAKI Vulcan 400 Classic, SUZUKI Intruder 400 Classic, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, YAMAHA SR400/500, YAMAHA TW200/E, YAMAHA TW225/E, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 250, YAMAHA Dragster 400
It was defective.
After installation, the Fuse jumped when I checked the operation. I checked and found that the Bolt of the Blinker's Wiring Fix had contacted the Earth of the Horn and was shorted. I did not expect high quality because of the low price, but if you are going to sell them under the GarageT&F brand, you should at least check the operation of all of them before shipping, etc. I was disappointed when I installed it after processing and repairing it. View detail
Fits: HONDA Rebel250 S Edition, HONDA Rebel250 S Edition, HONDA Rebel250, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250
good item
Riding the Rebel 1100 raises the position of the uncomfortable steering wheel high. It's a great item because you don't have to change the steering wheel and you don't have to change the cable. It's just too expensive. View detail
Fallen cannibals
I use Retractable Lever, but I bought this one just in case.
I have not yet encountered a situation where I can install it and see how it performs, so I can only judge it by its appearance.
Cut-out products are quite satisfying just to install.
When installing, make sure that the Clutch Side and Brake Side are facing in the correct direction, as it is indicated on the package which side it is on. Also, there is no indication of which way is up or down. Use your own experience to cover it.
View detail
The usual.
This is the Lock wire I use all the time.
I bought it because it was out of stock.
I have Sizes before and after this one, but the 0.57mm is the most versatile.
View detail
Roughness is noticeable but sufficient Level
The end of the cord is divided into a Headlight wire and a Connector that holds together the OthersBlinker and other components.
It looks like Gold genus and is a bit heavy.
Blinker also has a slightly unique switch. Normally, the switch can be returned to the center position by pressing it lightly, but this switch will not return. You need to return it to the Center position by yourself. It is so difficult to return that the opposite Blinker will be attached if you do not press it with a good degree of force.
View detail
Great product, great price, easy install
Easy install, took only 15 minutes,went on with no issues. Very good quality and really makes for a much more comfortable ride. Being a 185cm tall rider the 30mm additional height was exactly what I needed for those times I need to be standing up through the rough technical terrain. I would definitely recommend these for taller off road riders.The zeta clamps are exactly what I needed at an affordable price.I can easily recommend these risers.It's worth the money in my opinion. View detail
Genuine BarkBusters Bar Mounts for MT07 2014
These were a purchase because the owner wanted some added protection from wind during long rides and these were a good addition as you can add larger shields. Finding the right part for this specific bike was not hard as I just searched fot the MT07 and filtered the parts needed. These are a little expensive but they are the 2 point fixing and therefore, will not just get knocked off at the slightest hit. Obviously, they do protect the hands and handle bars in case of an accident from being hurt. I did have a couple of other items in my basket and got them all sdhipped together to save a bit of shipping cost. My chosen courier was EMS Express and was delivered within a week of placing the order. The box these came on was well protected and no damage at all. The mounts come with the hardware attachments you need to add to the MT076 so you don't have to buy additional bolts etc. The finish of these is excellent, the paint is a satin black but very smooth and look great. The best part about these branded hand guards is you can add which ever shield you prefer. We already had the carbon ones and all fitted look really cool and a plus point is that they do protecrt. Very happy with the buy. Thanks Webike for the great job. View detail
I have more space.
It rained today, so I couldn't ride my bike, so I had to put parts on it.
I've heard from a lot of people that the CB250R has a wide steering wheel and that it doesn't feel right.
I had purchased a steering wheel and this Kit, just in case.
My impression when I rode the car in normal condition was ・・・・, well, it's just normal lol.
Since I bought it, I thought I'd install it.
The work itself is super easy.
The position is only 2 cm up, but it's easy.
I wonder if I'll ever use the Handlebar I bought.
However, I still felt that the Handlebar was somewhat removed from the aggressive style by the increase.
Well, I'm your uncle now, so I'd prefer it be easy.
I think I'm going to try riding around in this for a bit.
View detail
Fits: HONDA CT125, HONDA GB350, HONDA GB350S, HONDA CB400 SUPER FOUR, HONDA CB1100, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1300 SUPER FOUR, SUZUKI V-STROM 250, SUZUKI SV650, SUZUKI SV650X
It is easy to install. (by SuKill) Firmly equipped
Installed on CT125CT110 HUNTER CUB.
I had a hard time pulling out the OEMBar End, though,
The stability of the installation is perfect and satisfactory.
If Protector is also equipped separately, it can be used in a reasonable way.
Windshield effect is also obtained, and customization is also possible.
The high price is also a Point.
Universal Type for other car models
So I want to use it for other Motorcycle.
View detail