Reviews
Fits: Others
Convenient items that save you time and effort
Since the LED Blinker was made into a Hazard by the Pilot, it is a time saver, considering the time and effort required, rather than having a rectifying Diode, Wiring, Heat Shrink Tube, and Bullet Terminal.
In my case, I decided that making a wiring was better than machining a wiring for a vehicle in a small space, so I used broken T5Socket components to make a complete set.
Merit is that it can be returned to full normal when TroubleShoeing.
Demerit is that it takes a lot of time and effort to fit in a lot of wiring.
Please refer to the photos for reference.
View detail
Fits: Others
Easy
I bought this product for the pilot lamp of my Takekawa SquareLCDMeter, which I installed on my XR100R road spec. I also bought and installed the same product on my XLR80R when I changed the Pilot lamp and Blinker Valve to LED before.
The only thing you need to do is to interrupt the wiring and take out the earth, so if you have enough skill to do the Bullet Terminal at Electric Works Pliers, you can install it without much effort.
I always buy them when I need them because they save me the time and effort of selecting materials, mail-ordering, and making them myself, and I don't have to worry about the wire breaking.
View detail
Fits: Others
No problem if you have the knowledge.
I used it to convert my SDR200 to BlinkerLED and the Instruction Manual was good and easy to understand.
The point to be noted is that it doesn't work properly if it doesn't interrupt the wiring just before the Pilot lamp according to the Instruction Manual.
At first I was impatient because it didn't work properly. It would be better if it was a little cheaper.
View detail
Fits: Others
barely
I changed to Light Bulb Type LED and IC Winnings to Relay but still got hazard in spite of changing to IC Winnings. I found this product on the net and it worked perfectly. The URL I found for reference is https://daradara.site/entry/halogen-bulb-led-bulb-turn-signal View detail
Fits: Others
Easy
When converting the Blinker to LED, the Blinker pilot lamp will be converted to a for Both With the Left and Right single light system, the blinker does not work properly
The quickest way is to pull the Valve on the Pilot lamp, but the risk of forgetting to turn it off is increased I will
This product has a resistor inside the Bullet Terminal, which can be connected to Blinker behaves normally
If you can do a little bit of electronics, it's easy to build something of the same caliber yourself, but if you can gather parts and tools, you'll be able to make it yourself The hassle of crafting with
I think it's a little bit expensive, but when you consider the time and effort involved, this product, which only needs to be installed, is a good and affordable solution I think
View detail
Fits: Others
Pine Stripe Harness for Vehicles with Double-Use Blinker Pilot Lamp (Left & Right)
I used it in conjunction with FILITTLE CUB's Blinker LED. I switched to ICFlasher relay and used Harness to make use of BlinkerPilot and Audio systemPilot. Blinker pilot lamp and Neutral lamp also changed LED, but it operated without any problem.
View detail
Fits: Others
Blinker LED
Indicator did not turn on when Blinker was turned into LED.
I lacked electrical knowledge and I tried various things and found that Indicator is Common For Left / In the case of Right Side 1 light type, it seems to be a phenomenon that occurs as if it is common, this product is what we arrived at.
Instruction Manual Also easy to understand, it is relatively easy to connect.
Work itself did not take so much time.
Apparently, if you are knowledgeable, there seems to be some dissatisfaction in terms of Cost, but it was a satisfactory product of true feeling that "I was saved" to people like me.
View detail
Fits: Others
It is convenient
Blinker indicator is Common For Left / I bought it for Right Side 1 light formula. When Blinker or Indicator valve is converted to LED, current amount etc etc.. Indicator will not light up due to the relationship. In that case, using this kit is convenient to solve. Since there is Instruction Manual, I think that work is not difficult if we can remove it with Meter.
The price feels high from Parts itself.
View detail
Fits: Others
When ADDRESS-V125 G (K7) was owned before, the company's LRL-700 was used and the Blinker bulb was LED-ized. Since K7 newly purchased without holding and V125S (L0), it decided to divert. If is carried out, a Blinker will not work normally. Th
When ADDRESS-V125 G (K7) was owned before, the company's LRL-700 was used and the Blinker bulb was LED-ized.
Since
K7 newly purchased without holding and V125S (L0), it decided to divert.
If
is carried out, a Blinker will not work normally.
This is because the Blinker indicator in a Meter is right-and-left common use.
This LHN700 was purchased although he thought that it was comparatively high-priced as a measure against
.
Although it was checking that a part [ careful ] was published ADDRESS V125 K7 or subsequent ones on the company's Homepage beforehand [
], an explained part of goods enclosure did not have a statement.
since -- the explanation on a Homepage was printed on paper.
How to use only by explanation of a Homepage place is not known again, but it is in the end (distinction which [ of wiring which is V125S ] corresponds is impossible).
If it is going to give up
LED-ization, it will operate by an LED Valve normally without knowing why.
After all, it does not use but this Harness is cancellation.
Although it became
waste of energy, when purchasing, and it could decide that it was solvable now by Kami who applied a trial-and-error method to many things, before purchasing and having been purchased, I thought that it was good.
View detail
Fits: Others
When NINJA250R is used as an order LED Blinker, it is Hazard blink using IC Blinker relay.As a result of investigating a cause in a Net, it arrived at this product.Goods arrival removed the Indicator light and corresponded.About goods, since it did no
When NINJA250R is used as an order LED Blinker, it is Hazard blink using IC Blinker relay.As a result of investigating a cause in a Net, it arrived at this product.Goods arrival removed the Indicator light and corresponded.About
goods, since it did not operate unless it was this Harness as it is an all-in-one, although it thought that it was expensive for this Harness, I think whether it is appropriate.
View detail
Fits: Others
Since the pilot was changed, it purchased together. It is kind that a plug is two-pair attachment. It is -, although it mistook once and being cut.
Since the pilot was changed, it purchased together.
It is kind that a plug is two-pair attachment.
It is -, although it mistook once and being cut.
View detail
Fits: Others
The trial was carried out for many things and it did not operate perfectly. It may be a problem peculiar to a motorcycle. There is not any blinker pilot. Since the blinker lamp itself was in the legible location, he did not need to buy his own
The trial was carried out for many things and it did not operate perfectly.
It may be a problem peculiar to a motorcycle.
There is not any blinker pilot.
Since the blinker lamp itself was in the legible location, he did not need to buy his own motorcycle.
Please use direction reference under purchase examination.
View detail