Reviews
I wish you hadn't made it to market so soon
ETC, anti-theft, fog, navigation, grip heater, USB power Attachment branches, such as supply, are easy to perform
I wanted the product to be available sooner
View detail
Fits: KAWASAKI NINJA 650, KAWASAKI ZrX1200 ZrX1200 DAEG, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI ESTRELLA 250, KAWASAKI VERSYS-X250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z125 PRO, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 250SL
Is it necessary to install a USB Charger?
A must for anyone who just bought a new car or doesn't want to damage the OEM wiring
There is no need to pinch the Fuse because it is not directly on the Battery (on the motorcycle side) (via Fuse) and
The power supply of the device to be connected to the main key OFF/ON can be turned off and on
Bullet TerminalFemale terminal is a bit small and tapered We need to spread it out a bit with Pliers
View detail
Required for Y's Gear USB Socket installation
Required to install the USB Socket on Y's Gear, but this Socket output is weak So to be clear, the 12V Socket in the Glove box has a commercial It might be better to use it with a USBAdapter View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
Installed on NMAX
I installed it in NMAX, but when I open the front cover and see the wiring part, I put it here There was a Connector that asked me to give it to you, and I installed it, but I ran out of Fuse
In fact, it is made to interrupt the Connector next to the blinker relay, but I found it at first sight It's hard to do
There is no Instruction Manual, so I'd like to see a more detailed version of this book I'd love to have one, and I'd recommend the Trident Connector for NMAX
View detail
We can make four RelayWiring systems
[Was there anything that disappointed you?
The precision of the lid is so loose that it doesn't feel like it's snapping
The M6Nut terminal block was so one-sided in its seating surface that it didn't pass JIS
Bullet Terminal's Female is too hard to fit, and it doesn't look like it's domestic either I had to stick a pin punch into it to spread it out
It's not as space-saving as I thought it would be, the Bullet Type Terminal is in one place To focus
Do you have any wishes or improvements you would like to make for the Manufacturer?
Unit should be installed with Velcro instead of double-sided tape It's easier to remove the Unit to turn the terminal block Nut
[Do you have any products to compare it to?
This is the only one on the market
What made you decide to buy?
Wiring the power supply to the Unit allows for 4 RelayWiring
Was the installation difficult?
Unit installation and connection itself is good
However, the Bullet Terminal is clustered in one place and that's where it becomes a cluster
【Please tell me the installation point and hang】
If I can get three power lines to work, the rest is a piece of cake
We need a space for the Bullet Terminal, so we need to find a space twice the size of Unit (used to make an invitation) let's
[Was the Instruction Manual easy to understand?
I wish I had a wiring diagram, but it's written in gu dougda
[Included Parts:were they on?
Double-sided tape is included, but it's more convenient to use Velcro for later
View detail
The Savior of Cluttered Wiring
So far, I've used Emon's Relay to power the Attachment from the Battery I was taking it, but both Relay and the branch terminals and Fuse take up a lot of space, so Seat's The bottom is stuffy
However, with this, you can keep the power supply capacity and consequently make the circuit compact
Relay and Fuse are all-in-one, so setup is easy, and It is easy to add or change attachments, and it is also easy to change the size of the attachment
I've been waiting for this product since it was announced and it has lived up to my expectations
I recommend the Large change to the riders whose Attachment is increasing rapidly nowadays I think
The only thing that bothers me is that when incorporating Relay into a circuit, the back EMF generated at the time of power off is The diodes are built in to prevent other electronic devices from being destroyed by Is it ……?
I've diverted the Diode I've been using for Relay to this one
View detail
Fits: HONDA SUPER CUB 110, HONDA SUPER CUB 110, HONDA CROSS CUB 110, HONDA CROSS CUB 110, HONDA SUPER CUB 50 PRO, HONDA CROSS CUB 50, HONDA SUPER CUB 50, HONDA CROSS CUB 110, HONDA SUPER CUB 110 PRO
The thicker the One sizeWiring is already, the better
I used it to split the ACC power supply of the C125 I think a little thicker wiring is better Check the drawing and measure the electrical modifications carefully View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Divertible
I used it to take out the ETC power supply of CB400SF
The color of Wiring is different because it is not a special product
After staring at the CB's Service Manual
I guessed Testers to try it out
The Earth and Attachment displays match the CB!
It was able to look and wired beautifully
Recommendation
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
it's simple
Buy with YZF-R25 to power the Doreco.
It's easy to connect to the Coupler, so where you can not hurt Wiring
Was it good, but the installed plug receptacle is Small?
The plug does not easily get in and it spreads out with Driver and managed somehow.
Well it's just a matter of replacing the Bullet Terminal.
The essential dorareko is working normally.
View detail
Fits: HONDA SUPER CUB 110, HONDA SUPER CUB 110, HONDA CROSS CUB 110, HONDA CROSS CUB 110, HONDA SUPER CUB 50 PRO, HONDA CROSS CUB 50, HONDA SUPER CUB 50, HONDA CROSS CUB 110, HONDA SUPER CUB 110 PRO
so-so.
I think that it is a good product that you can put on supplies with the vehicle Harness not wound. I used it to take USB power supply.
But the tags of B + and ACC are wrong and Battery has risen.
Do not believe me and recommend installing after checking once.
I think that it can be used because it is not such a high product.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
It is clean
I chose this product because I did not want to touch the wiring. It was used in xsr900, and it was installed very neatly. Charged well and satisfied with the product. View detail
Extremely convenient
Voltmeter etc on GSX-S1000 etc. It was convenient to use to take out the power supply when installing. Position lightHarnessCoupler interrupts the power supply, so you can process Wiring in a short time. View detail
DIY It's Exactly handy for you.
It is GOOD becoming WaterproofCoupler.
However, since the RedBlack line for taking out was a Bullet Terminal like the image, 2-pole Waterproof Coupler is prepared separately.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
I am only Well to OEM.
There are three empty Connectors for DCOut behind Meter behind Racer.
Two of them are compatible with this product's Connector.
Although this product is interrupted Wiring, since it is an empty Connector, simply the Connector
Since it can connect if there is, it makes us feel a little wasteful.
I cut only the Connector used for connection and used it.
I connected with KIJIMA USB Power supply, I was hooked by Don Pissha on the free Space of MeterRight Side.
View detail
It attaches and easy.use of was done at wiring of the Top-case Stop lamp of GIVI.
It attaches and easy.
use of was done at wiring of the Top-case Stop lamp of GIVI.
View detail
Only by making the existing wiring bite, another Line can be taken out easily. Since plug terminal is also attached, the rest only wires according to a thing to attach. After often checking, you have to make it bite, since re-use seems to b
Only by making the existing wiring bite, another Line can be taken out easily.
Since
plug terminal is also attached, the rest only wires according to a thing to attach.
After often checking, you have to make it bite, since
re-use seems to be difficult.
View detail