Reviews
Slider
I don't want to be a part of it, but I bought it as a wand to keep me from falling
Anyway, it's hard to tighten the mounting nut! Other than that, it's a good product
View detail
Fits: HONDA CB400SF Revo, HONDA CB400Super BOLDOR Revo, HONDA CB400SF VTEC
It bothers me
2014, 400 BOLDOR (NC42) It is
If you have a 24mm Wrench prepared in advance, it can be installed in no time
I decided that the gold insert color would go with the disc Well … it's fine, but I guess I want to yabby! (Lol)
I guess you can think of it as insurance
View detail
I'd say it's an 80 (^^)
Initially, two months' waiting time for the order (>_<) In response to Ue-Big's reply, (do I have to wait that long? I'm giving up.) I'm not sure what to think However, it arrived today, June 10th, and I'm relieved to hear that it's arrived today I'm so relieved that it arrived so quickly! 。 Well, it was the end of an early day of work today, so I installed it while painting it, which was easier than FRONT I put it on once to try it out, checked it out and painted it What's inside is SliderGuardQuantity:Pair (for Left and Right) WheelShaft PenetratingBolt (one piece each) Bolt cap (one piece) One of each, Quantity:Pair (for Left and Right) (Wrong dimensions) This is the English version of the instruction manual 。 Put PenetratingBolt in from the Exhaust System side and Tighten on the Chain side (with SliderGuard of course) de re-tightening I used two Ratchets, one side was 13mm and the other side was 10mm After that, put the Cap on and that's it If you don't paint it, it will be done in 10 minutes I will do the test run now View detail
Fits: YAMAHA MT-07
I don't know if it's the right year, but it's 58 points
My MT-07 is a 2018 model, but the installation (which seems to be common to ALL MODEL) is It's very simple, but it has a drawback:you have to put one of the wheels from the Left into the WheelShaft SliderGuard and co-tightening Shaft together, and Right I apply SideSliderGuard and tighten the Shaft, but I don't know why Do you think that the Right Side is tightened at an angle...? Is the pie in the wrong place? The point is, Guard's pie is too big,...do you want him to bite the gold in the seat? Or do you want to cut it down, or...? I chose the latter, and I sharpened it I used electric tools for the time, so it's not so bad It's a perfect fit It was fixed perfectly I tightened both bolts, and then covered with the catsuit The test run was done, but it is OK When the mileage increases, I want to tighten the bolts View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Parenthesis OK
The instructions weren't detailed, but installation is easy - a few minutes with Hexagonal Wrench Ends with
I hope I will not be indebted to the purpose of this product and end up with Dress-up
View detail
It is cheaper than FOR JAPAN MODELManufacturer
It's cheap to buy both front and back, which is the FOR JAPAN MODELManufacturer I'm not sure if you can afford it, but I think you can buy it, and the large size of the protector part is good Material also seems to be strong
As for the installation, both sides of the Shaft are cut in a groove, so tighten them up equally You need a hang to I welded a nut on one side to prevent it from turning
View detail
Installed on a 125CCScooter
I installed it on my PCX, but the KOSO Slider is better than the Front fork for similar products Balance with is good
This product looks a bit large
I installed it in NMAX, but it is still somewhat big and balance
View detail
Fits: HONDA GROM [Grom] (MSX125)
Good
An instruction manual is not included for installation, but the If you can pull out the front axle shaft, it's easy to install View detail
Fits: HONDA GROM [Grom] (MSX125)
Good
It was solidly built for the price
Installation instructions are not included, but the Rear axle If you can pull out the shaft, it should be easy to install
View detail
Fits: YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA XSR900
sounding good
I installed it for the Circuit run I installed it on my TRACER 900GT with no problem It's not as per the Instruction Manual, but the installation has no rattling and is secure We could have installed it View detail
I couldn't figure out how to install it
I don't know how to remove the Cap from the car and install it in the place where it is installed first I took it off after reading the manual There is no description of how the Slider is fixed after it is installed, and it is not clear to me as a beginner I was troubled by the Large change when I installed it I feel that the product is good, and if the explanation is attached carefully, I feel that Large is a good product View detail
Fits: BMW F800R, BMW R1200R, BMW R1200RS, BMW S1000XR, BMW S1000XR
It is easy to install.
It's unlikely to be lightweight and easy to install. It is a place where you can see it even when you get on the train.. We gathered around the undercarriage. Red Looks like it will be on time.. I bought it with the Slider of Back but the color of the matching is nice. View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z1000 (water-cooled)
For you,
I thought that it was due to mitigation at the time of falling as I experienced standing,
Making ? Easy to install and easy to install, it was possible to install in 10 minutes as fast as ten in Socket wrench of 10?.
However, the Instruction Manual is too small and can not be read, Seal in the appendix is ??Large.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI KATANA, SUZUKI GSX-S1000
Protection was effective.
I accidentally toppled the other day.
However, thanks to the Protection effect, I could return home without Front fork and Damage around Brake !!
Due to a fall, a little deformation was seen, so I decided to buy again.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
Satisfied
The feeling attached is good.. Please be careful when installing because it is Large strangely by yourself.
It is important to look! I do not understand so I do not know the rest.
View detail
If the structure is similar Motorcycle ? ? ?
It is Xake Wash with XSR 900 (RN 46J type) I used it. Since Base is MT - 09, it can be attached without any problem.
As for the effect, it can not be confirmed because it is the product whose true value is demonstrated only after falling over. As much as it does not happen to the extent that it exerts its effect ^ ^;
If it raises the difficulty strongly, the Nut for installation is 13 mm Nut which is not much used in domestic cars. I hope I had it, but some people do not have it ~.
View detail
It is lengthy
The length of Shaft? Is not at all (Lol)
There are around 35, but in fact it is 30?.
I bought only Shaft at the nearby Home center
It looks like Fashion
View detail
Easy to install Dress-up!
Dress-up I installed it thinking that I should reduce even a little even the Damage at the time of rolling down.
Installation was very easy, but Wrench is Quantity : Pair (for Left and Right) It was necessary to hold down with 2.
Other than that it was very good as it was very smooth.
It is cheaper than those made by other companies but I like it very much.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI NINJA1000
It looks nice
There are various Manufacturers but I adopted it with price and appearance. Although I do not know the performance unless I do it in practice, I do not want to take care of this Slider. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09, YAMAHA YZF-R7
Good feeling
This time we purchase both Front and Rear, the quality of the product is also good Performance as a Slider ... I do not know, but easy to install, Total 15 minutes, after installation a little conspicuous feeling View detail