Reviews
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF-SP
Purchased for protection in the event of a fall
I bought it in case of emergency.
However, the product I received was scratched and the plating was peeling, so I contacted the manufacturer directly to have it replaced.
I ended up removing it because I was worried that I would not be able to remove the Crankcase Bolt in the event of a fall.
View detail
having an effect
The GuardBody had been scraped to about half its thickness on the lower part, but there was no damage to the EngineBody thanks to the Guard being installed. View detail
Chosen by Cospa.
It is not noticeable with the backdrop, but it is not curvy and floats a little, so it may not be suitable for those who are concerned about it.
ScrewQuantity for installation:Easy to attach by simply removing 2pcs.
If you can avoid the cost of repairing a broken Radiator for $7,700 and not being able to run on your own, it's a small price to pay.
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF-SP
I recommend it!
I bought it for when I was standing up and stumbling.
To install, simply remove the Bolt from the bottom of the Engine, install the Guard, and tighten with the Bolt and collar from Included Parts:.
The work itself is easy, so even beginners with tools should have no problem.
Then, after a while, he unexpectedly stood up and stumbled.
The result was that this protected the Engine with flying colors.
Naturally, there are scratches on the Guard, but the Engine is intact.
I am really glad I installed it.
Originally it had Red color on it, but was replaced with Gold color when it was scratched.
The price is not cheap, but considering the high price, it is not expensive (personally).
It can be used in combination with the Engine Guard, which is a type that is attached to the frame, so if both are attached, it is a good idea to combine protection and dress-up.
For those who have not yet installed it, we highly recommend it.
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF-SP, HONDA CB1300SB, HONDA CB1300SF
CB1300SF SC54 2018MODEL Engine Guard
This is a great looking and easy to install Engine Guard that will protect your engine in the event of a fall. View detail
Before you get upset...
I installed these on a 2017 GSX1300RHayabusa.
important item
[Was there anything that disappointed you?
The Engine Guard itself has quite a bit of Edge, so I was disappointed that the vibration of the Engine would probably scratch the Cover.
It would have been nice to have a little more Space or some kind of buffer material such as Urethane instead of a pita position.
In my case, once the curing Tape is pasted on the part where it is likely to contact.
Also, to be honest, I'm not sure if this would be a good engine guard in case of a fall.
The thing itself is fixed with a few screws of about 6mm, so I have the impression that it could easily break.
It's just a question of whether you can guard against scratches to the Engine when you take it down slowly. This is the degree.
Do you have any wishes or improvements you would like to make for the Manufacturer?
As mentioned above, I would like you to include thethaneTape for attaching to the part that interferes with the body, or add a spacer.
[Do you have any products to compare it to?
AGRAS:AGRAS Racing slider
https://www.webike.net/sd/9646109/
What about DURACON? But I thought POSH is better in terms of texture and price, so I bought it.
However, DURACON might have been a better choice for the above reasons.
Frequently Asked Items
What made you decide to buy?
I bought this to install on my GSX1300R Hayabusa 2017 to hide the scratches I get when I hit the ground.
If you have a Second Type Model (2008 or later), you can install it.
ScrewQuantity for installation:It is very easy to work with as it only requires 2pc and can be installed in less than 10 minutes.
How was your experience with it?
The product is so well made that it could have been OEM.
If you can reduce standing scratches for about $8,000, it's a cheap buy.
Was the installation difficult?
It's very easy.
Simply remove the corresponding Screw and install the supplied longer Screw.
【Please tell me the installation point and hang】
If you put this product on the place where you want to install, it will be easy to know which screw you need to remove.
[Was the Instruction Manual easy to understand?
It was the bare minimum.
[Included Parts:were they on?
Not particularly
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF, HONDA X4, HONDA X4, HONDA CB1100
I hope it doesn't have a feature!
I don't think this will be enough if you really fall over. I think it's better than nothing. I used to have a D's Skit Pad, but it got in the way when I replaced the Radiator hose, so I put this on. It was no problem at all. View detail
Just enough to cover up the scratches from when you're standing there.
It hides the scratches just fine when you've been standing on it.
I like it because it's Black and it doesn't look bad.
This is a Bolt replacement color addition, so it can be easily installed by removing and attaching a few Bolts.
View detail
Fits: HONDA X4, HONDA CB1100, HONDA CB1100, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA X4
Guard does.
This is my second purchase. The first time I fell over the Left Side, but no damage to the Engine because of this.
However, the material is Aluminum Cut-out, Plating (Anodized Finishing) So if it is damaged, it cannot be repaired.
Previously, I chose the Titanium color, but this time I bought the Red. If it's a cheap one, the color will change to pink immediately, but there is no change in color because of the price.
Even such a small thing will protect the Large thing.
I wish the price was under $10,000.
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF, HONDA X4, HONDA X4, HONDA CB1100
It is important to look
There are no instructions on the product Actually, it's 4 bolts, 4 colors, but WasherQuantity:2pc. I can't decide which Bolt to use it for! It's extremely unkind View detail
Fits: HONDA X4, HONDA CB1100, HONDA CB1100, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA X4
I quite like the texture
It was originally the same one, but it was scraped off by the fall, so I replaced it with a new one
It is easy to install, but I am a little worried about oil leakage because you have to pull out the bolt to
You can install it quickly because it won't leak as long as you don't apply strange pressure with the Bolt out Recommendation
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF, HONDA X4, HONDA X4, HONDA CB1100
Not bad
CB1300SF 2002
Purchased to hide a bobbing Wound
It could have been completely hidden with a little more height, but you can see a little bit, but I'm mostly happy with it I do
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF, HONDA X4, HONDA X4, HONDA CB1100
It looks good
Wearing it for dress-up purposes
The effects are still, fortunately, unknown
The color is Titanium
In the meantime, the weight and color of Handlebar are aligned
View detail
Fits: HONDA CB1300ST, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF-SP, HONDA CB1300SB-SP
Good vibes
It's nice because it's easy to install and looks and feels immediately custom (*^^^^*)
The design looks good and the color choices make it a good Accent
I wish I had a Matte Black one
View detail
Good installation accuracy
Installation accuracy is good, and the instruction manual is detailed and includes tightening torques It's done Good in texture
So it's not cheap, but I'm glad I installed it
The color is Black, which doesn't stand out
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF-SP, HONDA CB1300SB, HONDA CB1300SF
Buy with Crank cover scratch prevention
We painted Crank cover in the same color as the Engine head, so standing etc.. I bought it for scratch prevention by.
We have selected Titanium color. Once installed, I like the color well well.
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF, HONDA X4, HONDA X4, HONDA CB1100
It is easy to install. High precision, perfect fit.
Generator cover bought hidden. Because it hides securely, it seems to work if the standing gob is enough. I do not expect the function as Engine Guard. View detail
Pretty good
Unfortunate Wound Purchase for hidden. Easy to install, it also has a car body color with no sense of incongruity in particular after installation. I regret that I should have installed it before it became a pity. I think that it is a good product. View detail
Fits: HONDA X4, HONDA CB1100, HONDA CB1100, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA X4
Posh engine guard
Excellent protective element of very fine manufacture. In addition to being functional, it embellishes the motorcycle with a high quality product Excellent protective element of fine manufacture. In addition to being functional, it embellishes the bike with a high quality product (Translated by google translation) View detail
Looks like Tough has a sense of security for that
I bought it because Point was saved.
Since it is becoming an old motorcycle, I attached it considering the supply of parts in the future.
I am concerned a little a little, but I can not see it while riding, so let's do it again. - - -.
I think the making is robust.
No problem with mounting accuracy.
I will be careful not to take care of me!
View detail