Reviews
Brembo 15cc 45 degree Oil Tank
I was unsure of which version to buy, either this 45 degree fitting or the straight outlet version. Because these are pretty good value, I purchased both. Will be used for the rear brake fluid reservoir but you can also use for clutch reservoir. Very strong, very lightweight. The screw on cap makes it easy to fill and use. Looks really cute too. View detail
![[Super Sport] Floating Disc Left & Right Set](https://img.webike-cdn.net/catalogue/10188/floating_disc_image_TS.jpg)
Fits: HONDA CBR 1000 RR, HONDA CBR 1000 RR
It is a cosmetic disc.
It was installed on a 2011 SC59 CBR1000RR.
Replaced from OEMdisc to Circuit Running.
The brembo SUPER SPORTS750 is 5.5mm thick, which is thick enough, and it is also full floating, so both touch and drag seem to have been greatly improved.
I can recommend this product because it looks very Parenthesis combined with performance.
View detail
![Brake Pad - ROAD [SA] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0321/25641018_20221226153439301_TS.jpg)
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1100RS, HONDA CBR600RR, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100, HONDA Rebel1100, HONDA VFR800F, HONDA VFR800X
brembo of trust
I bought it from Circuit Running.
We also considered Endless.
Due to the high price, brembo is the first choice.
I did
I don't know how durable it is, but I've seen Brake's
The grip Touch feeling is not bad.
The interval is for reference only, as it varies from person to person.
View detail
For Brakefor Clutch Master
The cap for the air breeder of the GALE SPEED brake master cylinder was missing, so I bought one for Brembo. The for Brembo has a ring that goes through the air breeder, so even if the cap comes off, it will not be lost. View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6RR
Might be more Reasonable than OEMRear brake disc
What made you decide to buy?
At the time of replacing the Front Disc, brembo did not sell the Rear Disc for ZX-6R, and we thought that the Front and Rear Discs would never be matched by the same manufacturer. I thought that the Front and Rear Discs would never be matched by Manufacturer, and I was planning to replace the Rear Disc with a true round shape Rear Disc by Sun Fatty later on. Just then, brembo sold Rear Disc for ZX-6R, and it was more reasonable than Sun Fatty's. We registered it in our favorite list immediately. We had not planned to replace the disc until the year-end sale, but we decided to purchase it this time because of the following reasons. Campaign products The fact that it became and Limited stock left. I was so excited! So, I bought it. The reason for the large purchase was that brembo products take a long time to come back in stock when they run out.
Kawasaki OEM Parts [92154-1865] I also ordered 4 BoltSockets together.
[How was the product?
SERIE ORORigidBrake disc rotor features a rigid type brake disc with high flatness and concentricity, designed with precise manufacturing tolerances and manufacturing cycle.:Stainless Steel, disc O.D. (220mm) and thickness (5mm) I'm excited about brembo's logo mark. To be honest, it's probably cheaper than the ZX-6R OEM Brake Disc….
[How was the installation?
To install, the rear wheel must be removed. The work takes a considerable amount of time. This time, we will do the work. Custom Diary." We will be posting this information on our website. Please watch it when it is posted. By the way, the work took about 2.5 hours including maintenance.
View detail
![Brake Pad - OFF-ROAD [SD] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0320/23437652_20221221105104353_TS.jpg)
Fits: SUZUKI RMX250 S, SUZUKI DR250SHE, SUZUKI RM125, SUZUKI RM250, SUZUKI RMX250, YAMAHA XT250X, YAMAHA TRICKER S, YAMAHA SEROW, YAMAHA SEROW250S, YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA TRICKER, KAWASAKI KDX125SR, KAWASAKI KDX200SR, KAWASAKI KDX220R, YAMAHA SEROW225 W, YAMAHA SEROW225 WE, YAMAHA DT230 LANZA, SUZUKI DR250S, KAWASAKI KDX220SR
Performance is ◎. Expect more durability in the future.
I bought a Pad for STD Caliper for SEROW250 from brembo.
Z-WHEEL's Zi-gram Rotor Rear (W51-20336) The product was installed at the same time as the
Compared to the SX, this product seems to be more focused on Control than Performance, but I am very satisfied with it because it has good Touch and also stops well in SD.
The other thing is durability, and we expect the product to be even more durable than the aforementioned Control. (It is your own responsibility if the disc is installed at the same time as a non-OEM disc, so it is incompatible with the OEM disc and decreases faster...)
View detail
perfect
installed this brembo on w650, because stock ones are not quite good for me. it's not bolt-on for w650, you need to customize bracket and wheel space bushings. also you need to improve the main cylinder and brake disk View detail
![Brake Pad - ROAD [SP] Compound](https://img.webike-cdn.net/catalogue/images/114748/Road-SP_TS.jpg)
Fits: MOTOGUZZI STELVIO1200, MOTOGUZZI 1200SPORT, KTM 1090 ADVENTURE R, KTM 1090 ADVENTURE, DUCATI Multistrada 1260S, MOTOGUZZI BREVA V850, MOTOGUZZI BREVA V1100, KTM 950SUPERENDURO R, BMW R1200R, BMW R nineT Urban G/S, BMW R nineT Racer, BMW R nineT scrambler, BMW R nineT Pure, BMW HP2 ENDURO, BMW HP2 SPORT, BMW R nineT, MOTOGUZZI BREVA 1200 SPORT, MOTOGUZZI BELLAGIO, MOTOGUZZI 1200SPORT, MOTOGUZZI 1200SPORT
Normal good
It works normally
It was Large sturdy, popped on without doing anything in particular.
It doesn't squeak and it usually works.
I thought the Red color insert was kind of nice.
View detail
![Brake Pad - ROAD [SA] Compound](https://img.webike-cdn.net/catalogue/images/114748/Road-SA_TS.jpg)
Fits: HONDA CB1100, HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA Forza300, HONDA FORZAZ, HONDA FORZAZ, HONDA FORZAZ, HONDA FORZAZ, HONDA FORZAX, HONDA FORZAX, HONDA FORZAX, HONDA FORZAX, HONDA FORZASi, HONDA FORZASi, HONDA FORZAS, HONDA FORZAS, HONDA FAZE, HONDA FAZE, HONDA FAZE TypeS, HONDA Silver wingGT600
subtle
I received it and tried to replace it, but I was worried that the pad pin might break off because it was so tight. I thought there might be a problem with the motorcycle body, but the Caliper was already OH'd and I did some chamfering and firring, but it did not improve the problem. I tried chamfering and firring, but it didn't improve the problem. The cause of the problem was the pad, because I didn't see any drag with a Japanese pad of the same thickness. I trusted brembo, the manufacturer, but I was very disappointed because the accuracy of the pad was poor and it was unusable. I had checked the compatibility of the pad before purchasing it, but it was a disappointing result. View detail
![Brake Pad - ROAD [SA] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0321/23437649_20221226140338735_TS.jpg)
Fits: YAMAHA GRAND MAJESTY250, YAMAHA RENAISSA, YAMAHA DIVERSION, YAMAHA ZEAL, YAMAHA XVS950A, YAMAHA XVS1300CU, YAMAHA XVS1300CB, YAMAHA XVVIRAGO400, YAMAHA ROADSTER1600 XV1600, YAMAHA XJ900SP, YAMAHA XJ900S, YAMAHA TMAX 500, YAMAHA SRV250 S, YAMAHA SRV250, YAMAHA SR400, YAMAHA SR400, YAMAHA SCR950, YAMAHA DSC400, YAMAHA DS400, YAMAHA BOLT
First brembo
I usually use Daytona's Golden Padχ, but I bought brembo's Brake Pads for the first time.
I have only test-driven it a little in town, so I don't know how comfortable it is on mountain passes, etc., but I have a feeling that it will be very enjoyable.
View detail
brembo after all
[How is it used?
Mainly Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
It's easy
How was your experience with it?
Expected
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It is not.
▼
View detail
Fits: YAMAHA WR250X, YAMAHA DragStar Classic, YAMAHA DragStar, YAMAHA YZF600 THUNDER CAT, YAMAHA XJ600N, YAMAHA TDM900 A, YAMAHA TDM900, YAMAHA YZF1000 THUNDER ACE, YAMAHA FZS1000 FAZER, YAMAHA DragStar1100 Classic, YAMAHA DragStar1100, YAMAHA BT1100BT1100 BULLDOG, YAMAHA V-MAX, YAMAHA XJR1300, YAMAHA FJR1300, YAMAHA XV1700Roadster warier, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1
I wish I could have replaced it by now, it was time to replace it, OEMdisc replacement w
I was originally going to purchase brembo Super Sport, but then I saw that they sold one that could be attached to the car.
Brake Fee Ring looks not so different. But if you look closely, you can see the Logo, so I think it is a little custom.
It is a little more expensive than OEM, but I think it is good because you still have the satisfaction of having bremboBrake Discs installed.
View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA YZF 1000R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA FZS 1000, YAMAHA FJR 1300, YAMAHA BT 1100, YAMAHA FJR 1300, SUZUKI Hayabusa, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000, MV AGUSTA F4- RR, MV AGUSTA F4- 1078
Fee Ring changes!
Just the fact that I changed to brembo makes me happy!
But when I changed Caliper, it was difficult to feel the Fee Ring change, but Radial brake master changes a lot!
Also, it is better to change the clutch lever to CORSA Corta Lever, which is easier to grip and gives a more unified feel.
View detail
Fits: SUZUKI 400X, HONDA CBR250RR, HONDA CBR500R, HONDA X-ADV
2017 cbr250rr (mc51 1000xxx ) I attached it to
*Reference at your own risk*.
I bought this product for x-adv on a good chance, because it was listed as compatible with x-adv in another company's product for the same car, and the dimensions were the same etc. I thought it was a bad idea.
The OEMBolt was able to be installed without any floating.
I have driven about tens of kilometers with no problems so far.
Although less expensive than the OEM Product, it is not listed in the Manufacturer's Conformity and may not be able to be installed under certain conditions.
View detail
Brembo parts
Great purchase, parts are as ordered and discribed, very fast delivery to New Zealand, Good to deal with, will purchase from again. Thank you A+ View detail
Brembo 15ml reservoir in smoke colour
I had always wanted to upgrade teh oem Yamaha rear reservoir for something a lottle different and wanted to keep with Brembo so this was a purchase I must make. I also wanted a smoke colour as I think they look better and do not cloud like some of the white/clear ones do. It was not hard to find the tanks on Webike as you just have to type in Brembo and search down. Easy really. Even though I was always going to put a tank cover over this, I would know that is was smoked and to my liking. The cost of this was really good and almost the same as a standard clear one anyway from Webike so why not. My order was delivered by Fedex as I do like how they operate. All was packaged really well from Webike which I do love. The tank came in a Brembo packet. This finish is a really good looking tank. There is no distortion to the look, the smoke colour is dark but not too dark not to see your fluid levels. Fits straight on and no problems. I did not even have to bleed the rear as I clamped the hose before removing the old one. I love it View detail
Very nice accessory for Bembo reservoir
I wanted to get something to cover the reservoir to kepp it from getting moisture in as we have colder nights here. I wanted to get one that was made for the Brembo reservoir so stuck with the Brembo brand. The tank cover is well made and has a really high cotton content which means it will soak up moisture really well. This thing looks great too which also has the appeal to everyone I know. There are 2 different types of tank cover so make sure you get the right one, this one fits nicely on a 45ml reservoir, the other one is for the clutch but as my bike does not have a hydraulic clutch, there is no need for one. I do however have a rear brake reseevoir which I have already changed to a Brembo, so I also purchased one for that in the process. Anyway, enough of the waffling, very happy witht he tank cover, it looks brilliant and does what it says on the tin View detail
Brembo 15ml tank cover for Brembo reservoir
This was teh other tank cover that I purchased for the rear reservoir. I wanted to keep the Brembo vibe going and as I already had a Brembo reservoir tank on the rear also I went for the Brembo tank cover. This is also made with a very high cotton content and this means is wicks the moisture away and stops it from getting into your reservoir. No one wants contaminated brake fluid. This is very bad for your brakes. The right rtank cover was found on Webike but as I was already going to buy the 45ml one anyway, i couldn't really get it wrong with this 15ml one. This one as you can guess is slightly smaller and has only one logo on it whereas the biggere 45ml version has front and back. My order was shipped using Fedex as I do trust their efficiency and know my order will arrive safely. I am very pleased with how this tank cover works, it looks out of this world and very pleased indeed. View detail
Custom
I have not installed it yet, but I am satisfied with the product. View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1100RS, HONDA CBR600RR, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100, HONDA Rebel1100, HONDA VFR800F, HONDA VFR800X
Attracted by bremboBrand
I bought this for a Circuit run.
I was not sure about Endless, but it was too expensive,
This time I decided to go with brembo.
Braking performance is more solid than OEM.
I would like to verify how durable it is.
I think
View detail