Reviews
At One point.
OEM Product quality is a must.
I don't think you will see this in FOR JAPAN MODELSEA BASS
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
I changed the look to a more modern look.
After 9 years of purchase, I changed the Blinker from Orange bulb to LED + Clear cover to match the LED + Clear cover of the Tail lamp. The price is a bit expensive at 10,000 yen, but it comes with Relay, so I guess that's about the same.
when Blinker is not attached. [Color] Clear is clean and Refreshing and I am satisfied with the aim.
ZX14R is very troublesome because the cowl has to be removed from both Front and Rear to replace the blinker valve, but I am used to this after installing other parts many times, so I can forgive it. (Plug replacement is the real work from here, and it is a very large change.)
It might be a bit challenging for someone removing Cowl for the first time?
It was worth the effort to replace it.
View detail
Tuck roll
I drove about 300km and I wished I had bought it earlier because it didn't hurt my butt so much and looked better than the OEMOPHigh seat.
Seat back is also almost like OEMSeat, inside front side. (where Gel Zab and Sponge are located) The "Seat" is also waterproof, which I thought was well thought out. A tool was also attached to the back.
When installing it, it feels a little too snug and a little tight.
(Archi, it's in long tail).
I had a hard time putting on the Tandem belt by myself… I have a grip strength of about 52kg, but it was tough to fix the bolt while pulling it.
View detail
Longed-for OHLINS
I installed OHLINS, which I had longed for.
All in all, I am satisfied!
It said that the Speedometer Cable needed to be extended, but since it is Frame Mounting, it was Large sturdy with Normal cable.
I will be working on various settings in the future.
View detail
Excellent stability
I thought 20,000 for just the carrier to attach the side back was expensive! It is firm and stable, and the stability is totally different from when I attached it with a seat bag or string. I think it is worth buying. View detail
Processing is beautiful
Bolt and Shim will be provided separately.
M10×25?Pitch1.5 and M10×25?Pitch1.25 are available.
The processing is beautiful and the rigidity seems solid.
I would have liked Bolt and Shim to be included if possible.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Highly satisfying just by the look of it.
The instruction manual is not clear enough. I recommend you to watch YouTube to see the image before you start the work. The ride quality is so different that anyone can tell the difference! View detail
Light, beautiful, and powerful. It is truly a brilliant exhaust system!
[How is it used?
Normal muffler weighed more than 10kg, so we wanted to lighten the weight of the car as much as possible, and the normal exhaust pipe would quickly turn brown and discolored. The style of the exhaust pipe is Normal look, lightweight, and beautiful color.
Was the one you received as per Image?
I was surprised that the box was larger than expected, but the catalyst is stored in the Silencer, so the box is large.
Was the installation difficult?
The three-part design allows for flexibility and easy installation.
YOSHIMURAOne piece is heavy and large, but this one is light and can be easily installed because it is divided into three parts.
How was your experience with it?
The volume is louder than normal, but you can feel the torque increase from low speeds. I could feel more acceleration in the high rpm range.
In fact, the PowerCheck Graph on the ManufacturerSite shows a significant increase over NORMAL, so I don't think it is my imagination.
Also, Center Stand can be used and Oil replacement can be done without inconvenience.
[Included Parts:were they on?
Gas Repo, Instruction Manual, Center stand stopper, Springetc., all necessary items are included.
[Was there anything that disappointed you?
I think WYVERN Exhaust for CB1100RS is better looking with Megaphone type.
▼ YOSHIMURA's Hand BentTitaniumMegaphone Exhaust has a shorter tube length and WYVERN Exhaust has a longer tube length, which is suitable for power up.
Also, the exhaust pipe does not protrude, making it compatible with an external Fender.
View detail
More stable than expected.
Used for Grom JC75.
It was used as is with no problems.
I am happy with the stability and it is more solid than I expected, but I still have to glue the Grip by myself.
I like the look of the product and look forward to seeing it in the future.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
Active Rear Caliper support
Purchased this for the Swing Arm and to replace it with a Brembo caliper. View detail
LightOnOff switch purchased and installed at Shop
It is also convenient to install a switch with a light ON/OFF function. View detail
Easy to use
I'm going to use the gloves and I don't have to worry about changing the Oil. View detail
For Mount bar mounting
[How is it used?
For rare vehicles that do not have a dedicated AttachmentMount bar,
Used to tighten the Bracket together with the Switch Box.
Was the one you received as per Image?
I have purchased this product in the past when it was processed on another vehicle,
The quality of the product is very low, and I think it's a perfect Spacer product.
Was the installation difficult?
Both inner and outer diameters are exactly the same as indicated, so it is a simple installation.
How was your experience with it?
The outer diameter is exactly the same size as the head of a Bolt with a hexagonal hole,
It fits in the bolt hole of the SW-BOX EXACTLY as we intended to use it.
[Included Parts:were they on?
Included Parts:No setting
[Was there anything that disappointed you?
There is none
Other items that would be helpful
Since the only colors available are Silver and Black,
It would be nice to have other colors.
View detail
Fits: SUZUKI GSX-S1000GT
Increased stability
I was wondering if it is supposed to be run with luggage in the Pannier or in daily use without the Pannier.
We replaced the OEMSuspension because we were concerned about the firmness and rebound of the OEMSuspension, especially when going over bumps.
After replacing the ring, the shock when going over bumps is reduced and the stability at the corner ring is increased.
It also has a lowdown effect of about 15m when riding, which improves the footing. (We are 171cm tall and have a long torso, Japan human body type)
I am satisfied with the performance of the Large, but the cost of the product and labor (Red Baron) was less than 100,000 yen, so I have given it a low cost-performance rating.
View detail
No complaints ??
Good accuracy/quality,
It can be adjusted more finely than NORMAL,
It also increases operability.
Basically, if you follow the Instruction Manual, there is no problem,
Only Brake switch,
Some PedalPositions may need to be crafted.
The structure is simple and can be made as small as desired,
I don't think it is a Larged issue.
View detail
Just right!
For me, it is not too large and not too small, just the right size. The installation can be done by anyone since all you have to do is stick it on, and the price is reasonable, and the change in appearance makes it a good value. View detail
Fits: HONDA glom, HONDA SUPER CUBC125, HONDA DAX125, HONDA CT110 HUNTER CUB125, HONDA MONKEY125
Oil change
I like that it's all in there so I don't have to worry about replacing it. View detail
Yamaha tappet adjuster 3mm
Original YGP. Fast shipping 3 days from mailed date to Singapore . Package bubble wrapped to ensure no priduct damage during shipping. View detail
Fits: HONDA Africa Twin Adventure Sports ES, HONDA Afriva Twin Adventure Sports, HONDA Africa Twin
Works outstanding!!
I was skeptical at first, but it fits perfectly and works great! Easy installation. I have the Honda CRF1100L Africa Twin 2021. View detail
It is up to you whether you think it is expensive or cheap …!
What was the deciding factor in your purchase?
I got the GP FORCE LEATHER JACKET that I have wanted for a long time. However, it is a good price, but … the chest and back protectors are sold separately. I bought it from Protector of the back first.
If the size matches, it can be attached to other AlpinestarsJackets, so if you have one, I think you can use it in many different ways.
[How was the product?
This is the most flexible Protector I have ever felt in a back Protector. The standard back protectors from other companies felt like they were put in your back! The new Clion PlasmaBack Protector Insert fits to my back and I don't feel like I am wearing it.
This time, I installed it on my GP FORCE LEATHER JACKET, size 54, which is slightly tight, and after installing the back protector, I felt like it became even tighter. It is now more comfortable than before.
Please take a look at GP FORCE LEATHER JACKET as well, if you would like to see it.
View detail