Reviews
ZETA X3 Protector
I installed the AdventureArmor Handguard and purchased the Protector from the same ZETA.
Although I was not sure if I wanted to go with the XC, which is a bit larger, I was happy with the X3 because it was a small motorcycle to which I would install it.
The Size is good for those who are OK as long as they do not get hit on the fingers by flying rocks or hard insects while driving, because it is Small for wind protection.
The Master cylinder guard, removable with Screw, was also a simple but interesting GuiMick.
Four bolts are also included, making it easy to install on vehicles that already have a hand guard installed.
The color White can be Blue-ish or Green-ish. I saw a Review that said
The color of the one I received was what can only be described as White when viewed indoors or in the sun.
Perhaps there is a slight difference depending on the production lot.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90 CM, HONDA SUPER CUB 90 DX, HONDA SUPER CUB 90 STD, HONDA SUPER CUB70 CM, HONDA SUPER CUB70 DX, HONDA SUPER CUB70 STD, HONDA CUB PRESS, HONDA SUPER CUB 50 CM, HONDA SUPER CUB 50 DX, HONDA SUPER CUB 50 STD
It will improve the ride and appearance.
[How is it used?
SUPER CUB I got used and cheap.
The SUPER CUB that we purchased was inexpensive, and the exterior of the SUPER CUB was sadly deteriorating over time...
A reliable Shop for such SUPER CUB Refresh! Tokyo Do. This time, we refresh the Rear shock, which had been in a soggy Rust condition.
The distributor is Tokyo-Do, but the manufacturer is YSS, which has become a MAJOR suspension manufacturer in Japan.
How was your experience with it?
The vehicle we acquired was a wrecked vehicle with a lot of mileage, so it was a simple matter to get a new one. Compare with OEM Product." The body of the car was squishy, but the movement of the body was crisp.
The included adjustment tool allows for 5 levels of pre-road adjustment, but in my case, the lowest factory setting was sufficient (I think the lowest setting is a little stiffer than OEMRear shock).
Another good point is that since the entire product is made of plating, it can be installed without any discomfort regardless of the color of the car body.
How did it compare to other products?
Several companies sell shocks in the same price range, but since this is the first time I have replaced the rear shock of my SUPER CUB with an Other Brand Product, I am not familiar with the MeritDemerit of each.
I wonder if there is no problem in coordinating with the car body color. I think so.
If you are interested in the behavior of the car when you drive on the circuit or push it to the limit, you may be more satisfied with the more expensive Rear shock.
[Points to note]
Not so much as a precaution, but to ensure safety during installation, to grease up moving parts, and to install with the proper torque, etc.?
This product is Ironware. The product is a plated product, so it can be enjoyed in a beautiful condition for a long time if you continue to take measures against rust, such as wax & coating, dehydration after driving in the rain or washing the car, etc.
Other items that would be helpful
The deciding factor in the purchase
A friend of mine who is a CUB friend was using this product (BodyPlating/SpringBlack) and gave it to me for a test ride because it looked good.
[How is it used?
I'm a city rider Main, and I'd like to take a slow touring to the north Large land by CUB someday, but it would be tiring........
【Included Parts:presence or absence】.
Rear shock absorberQuantity:Pair (for Left and Right) and a tool for pre-road adjustment are included in the package.
Also included was a YSS Decal and a brief instruction manual?
[ITEMS TO BUY TOGETHER
If you have a budget to spare, you can also use the Tokyo-Do handled Front Reinforced Sport Shock Original YSS and refresh both the front and rear for a more stable driving experience.
The Front is hidden and barely visible from the outside, but it is performance oriented.
Opinions and requests to Manufacturer.
The price is relatively affordable, and the product is easy to understand as a first step in Custom & Restore, so please continue the lineup.
View detail
Cost-effective, but requires processing
There is a process to make it like a plastic model.
The letters are attached one by one in Rose, so after folding the nails and taking out the BALI, they are framed in. This process was very enjoyable and had a Petit Custom feel to it.
When installing, the underside of the body interferes with the Fork Cramp, so modification is required.
I shaved more than 5mm at Grinder. (See photo)
Front looks better and I am happy with the low price and enjoyment of PetitCustom.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA DAX125, HONDA SUPER CUB, HONDA CROSS CUB
Vibration Absorbing Lever
Installation took a lot of time and effort. (OEM Bar End cannot be removed). It also came with an Instruction Manual, but it was only a reference, so I ended up asking a motorcycle shop for it. I am satisfied with the result. I purchased the 8mm thick handlebar, and the vibration from the handlebar has been reduced, but now I am worried about the vibration from the footpeg. View detail
More vibration transmission from Pedal
Was the one you received as per Image?
Except for the tip and Protector part, they are soft and not tiring to wear.
I didn't mind getting off the Motorcycle and walking around.
I have heard that the zipper is hard, but I had no particular difficulty when putting on and taking off the shoes, so I think it should not be a problem unless you are very inefficient.
[How did you feel about the Fit?
My normal shoes are 27.5 and the same size 27.5 (43) fit perfectly.
The toe was just a little extra and the width was just right besides. (I thought they would be too narrow.)
The heel, ankle, and ankle area feel soft and wrapped on the inside.
I used to wear Alpinestars FASTER 3, but even though the size was Exactly, the toes were not thick enough and my thumbnail was held down, causing pain when I wore them for a long time, but these had enough space and did not hurt.
How was your experience with it?
This is a comparison with Alpinestars' FASTER 3.
The soles seem to be a little thicker than usual. (Knee grip position is just a little bit higher than usual. (Knee grip position is just a little bit higher than usual.)
Grip power has definitely increased and I can move my body with ease. (Although FASTER 3 also grips well.)
If you are running, you can feel the wind around your ankles. (Other than that, they are not mesh, so they are the same as regular shoes.)
It is easy to move the ankle, and it is easy to do Rear brake and Shift change.
The vibration of the Engine transmitted from the Pedal comes directly to my feet. It usually makes my feet numb. (I guess I have to use cushiony insoles or socks to prevent this.)
Motorcycle with little vibration would not be a problem.
[Was there anything that disappointed you?
The Elastic band like thing on the back of the foot looks a little bit yucky. It looks like it will deteriorate if exposed to sunlight for a long time.
What are the specs of the product, such as protector?
I think almost all of them are like Protector. It seems to be the first problem for driving on public roads.
The inside is soft and comfortable without feeling Protector.
View detail
It can be used properly.
The texture does not feel cheap. It's also strong and stable.
When used in conjunction with the Ladder rail and placed on the Transporter, it can also be used properly as a step ladder.
STANDDecal is also easy to customize because of the variety.
View detail
Fits: YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450FX
I purchased this product because I plan to replace the exterior.
I can't say for sure since I haven't received the exterior yet, but it looks solid, thick, and sturdy.
It seems to need some hang to paste, but I guess it's not a problem since forest roads and Enduro are Main.
View detail
Fits: YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250FX
Not yet installed...
It is thick and firm. I wonder if it needs some hang to stick. View detail
Installed on a NC65 2024
Installed on a NC65 2024.
It is not in the compatible models, but there was no problem.
The 2022 and 2024 models are Large sturdy because they are the same Radiator.
View detail
I love it
I didn't expect so much because of the low price, but I liked them because they have a better texture than I expected and they are Side GoreType, so they are easy to put on. View detail
Accuracy...
The hole where the pin goes in was distorted and needed to be scraped with a file. It is not a large problem with a little work, but if you don't have a file, you cannot install it. This is why the quality rating is so low. View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Cool ?
The cosmetics are very good and look very nice. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It is easy to install. and the visibility has increased!
It is easy to install. and it gives me a wider field of view and helps me when changing lanes. one drawback is that it is not easy to remove. View detail
Many SR riders use it! (p∀p) aha!
[How is it used?
I wanted to put something Iconic on my car, so I decided to use it.
Was the one you received as per Image?
I believe I received the exact image of the product.
The inside of the lid has a tight Rubber so I thought the waterproof property was also good.
Was the installation difficult?
I think it depends on the installation location, but it was not difficult because I just crimped it into the available hole.
More than that - I was worried about the Logo to put inside, mainly because of the angle!
How was your experience with it?
Once attached, it does not bother me. The place where it is attached is not visible when riding, and it is completely self-satisfying.
[Included Parts:were they on?
No, it would be better not to add "Included Parts:" to increase the price.
[Was there anything that disappointed you?
None 。
It is a good Manufacturer that also offers Logo that fits the size.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Before purchasing or installing the product, it is recommended to test the product on a piece of paper, etc., against the part of the car body where you plan to install it to see how it will look, so that you will not make any mistakes.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS SE
Installation of groundwork
Purchased for Point cover installation.
Since all you have to do is remove and attach it, I think anyone can do it easily.
Only 1 pc of Screw lock agent will be attached, so preparation is necessary.
View detail
Newly confirmed as compatible with KF54 (ADV160)!
To JK05.KF47 It works somehow." It was a confirmation of the fit of the However, it was a just fit for ADV160 (KF54). View detail
Fits: KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KLX250, KAWASAKI D Tracker, KAWASAKI D-TRACKER-X, SUZUKI 250SB
Red purchased as a landmark.
It seems that the dirt does indeed stick to the tip of the Bolt when changing the Oil, but I'm not sure how effective it is. It just makes me feel like the dirt is sticking to me. LOL! View detail
Fits: HONDA Africa Twin Adventure Sports ES, HONDA Afriva Twin Adventure Sports, HONDA Africa Twin
AFT 1100 OEM Quick Shifter
Perfectlly working mainly from 2nd to above gears. 1st to 2nd still need some adjustment or skill improvement. Anyway very easy to install (detailed instructions) and configure. View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
I know it's not the same application, but this one helped me!
The other day, when I was in a fender bender with a car and fell, this Hook bolt was deformed but the Swing Arm was unharmed.
I guess the original purpose of this product is to be used as a Hook when raising the product in STAND, but it was helpful to play the role of a Slider.
However, as may have been mentioned in the product description, the clearance may not be sufficient and the STAND may interfere with the Swing Arm if it is used as a Stand Hook as it should be.
I don't want to bother you again, but I am still wearing the same one after the accident.
View detail
Fits: Others Universal
I wanted something inconspicuous.
Reflector is now required for installation of KOSORear Mudguard KS-MGXF-01.
We chose this product because it is not assertive and prevents the License Plate from bending.
Reflector was replaced with KIJIMA Reflector Slim 3, part number 305-2146.
KIJIMA Reflector Slim 3 can be installed without modification, and both the reflector included with the product and KIJIMA products are secured with M5 Hexagon Nut.
We believe that measures to prevent loosening of the Nut are necessary.
There are several ways to prevent nut loosening, but in my case, I use Nylon nut (something like Self Locking Nut) I used the
View detail