Reviews
It would be useful to have when pinching round objects with Vise
I had only had a Mini Vice until now, but when I needed to do some welding, I bought a medium sized Vise. I bought it because I thought it would be useful.
I wish the material was sized to fit the groove of this product, but it is a little difficult to use when the angle is not right. Also, this product has a strong magnet that sticks to the vise, but it is a little troublesome to use it after aligning the teeth of the upper and lower jaw because the teeth of the upper and lower jaw seem to be misaligned and the tooth sides are not aligned properly.
So, it is not suitable for all purposes, but there will be several times in a lifetime when it would be very convenient to have it. The color is Kawasaki green, which I personally like, but there is no Kawasaki motorcycle at the moment, so I am not sure.
View detail
For crafts
Purchased to secure aluminum plate when cutting out and drilling holes
It is working as expected.
View detail
High quality at a low price!
I like that it is affordable and can be easily replaced with high frequency! In places where the dust is great, two layers of Filter can be suffocating, but it is a recommendation because it further coughs up the dust! View detail
Swing Arm scale is for reference only
As the title says, the scale on the Swing Arm is for reference only.
I was looking at Motorcycle from behind and noticed that the teeth of Sprocket were somehow closer to the body side of Chain.
Quantity in the Swing Arm scale:Pair (for Left and Right) The position of Chain and Sprocket is not good, even though they are in the same position.
The Chain Alignment Tool was used to straighten the Chain, and the alignment between the Chain and the Sprocket was perfectly aligned, and as a byproduct, the Swing Arm scale was set to "Quantity:Pair (for Left and Right) We found that there was a Gap of about 2-3mm in the
If the alignment of the Chain is not correct, it can cause uneven wear of the Tire and damage to the Sprocket and Chain.
This is a Tool of Recommendation for those who are interested in getting ChainAlignment right!
View detail
Great tweezers
Love these so far. They are a great build quality that feels sturdy in the hand.Works great and made from metal so it's more environmental and sustainable material. Pleased I avoid buying another plastic tool.definitely recommend View detail
Lining Peeled Off Tool, but also useful for peeling off the exterior
The product name is Lining Peeled Off Tool, but it is also useful for removing the exterior.
There are two types of shapes, and the principle of leverage makes it easy to apply force, but it is likely to break if force is applied too much.
It's better to break it before the exterior cracks, though,
PushPins and other difficult-to-remove items can also be removed.
When using the product, cure the contact surface with Curing Tape, etc. before use.
View detail
Nicely made and very useful
Pretty good at holding motorcycle parts or softer metal you don't wish to mar with the vice teeth. I purchased 2 different jaw pads. Plastic and metal. All were very similar. They give multiple ways to hold part secure with damage. Good quality and durable. Retention magnets are weak though, slight bump and they fall off the jaws. Holding round rods at an angle or parallel to the teeth, not so much. They will warp if given too much torque. View detail
should have got these a long time ago,Great product
Nice tools from KTC. They are well made and effective. They wood handle is nice and the packaging serves as a storage case for them. these are amazing! These little gasket scrapers work great. I actually prefer them over most other kinds in my tool box. Ive used them on everything from bikes to jeeps to and they have always worked pretty good. you just need to be extra careful on aluminum gasket surfaces with them. Since they are steel they can gouge your aluminum gasket surface if you dont know how to use them and not careful. View detail
Universal Product
I bought it to clean the parts that were soaked with oil.
It may be a little soft, but I will adjust it by cutting it a little.
View detail
I was able to exchange Spring with peace of mind.
A special tool is required to remove the rear suspension spring.
There is a special Type tool that attaches directly to the spring and shrinks it, but I fear that it may come off when tightened and the special tool may fly away.
This special DAYTONA tool was able to work safely and stably because it uses ThailandBelt to tension the springs and fix the rear suspension mounting points.
In the actual work, a special tool is used for Rear suspension in quantity.:Set to shrink the Spring and remove the Lockling at the bottom end.
The spring replacement is completed when the new spring to be replaced is shrunk in the same manner, and the Lockling is attached and put back on.
The work was comfortable using solid, specialized tools.
It is a dedicated tool that is used only very occasionally, but it would be nice if the price were lower.
View detail
Recommended for Full Cowl Motorcycle!
Since my car is a Full Cowl, I have used many different Lining Peeled Off Tools to remove the cowl, but this product is very easy to use! I like that the resin used for the handle is different from the material used for the peeled-off part of the gold part! It is quite sturdy and I think it will last for a long time! View detail
Point Utilization
This time, my Point expired, so I bought TapTool, which I had wanted for a long time.
Repairing Bolts and Nuts that have become reluctant due to daily maintenance of cars, motorcycles, and othersMaintenance.
View detail
Easy home welding
[How is it used?
When we restore old vehicles, we find parts that are missing or damaged, and we have wanted a welder for a long time, but we have not been able to get our hands on one.
That's when he encountered Solidly's Bolt and completely licked his head, even breaking the Folding Bolt without tool.
I'll weld Bolt off!" I was so enthusiastic that I bought it with great enthusiasm.
Was the one you received as per Image?
Usually Quantity:Non-gas mild steel wire, tip, and leather gloves at the same price as the Set.:I was looking for a set of items, but I couldn't find a Tip anywhere.
I looked between the cushioning material and inside the product, and the Wire and leather gloves were indeed included, but only the Tip was missing. Well, such a trivial matter is fine.
How was your experience with it?
Doing the welding yourself. (almost) First time.
Since I had watched from nearby many times from preparation, I was able to start welding without any hesitation by following the included instructions.
I was impressed even before I started using it, partly because the instructions are easy to understand, but also because the structure is very easy to understand.
We tested the welding with an appropriate steel plate and went to work. Although the welding was done in a very amateurish manner, we were able to safely weld the bolt together and remove the bolt.
It took 30 minutes from the start of preparation to the removal of Bolt by an amateur. This is amazing.
Since it is semi-automatic welding, one hand is free to do some holding.
Moreover, the Breaker did not drop out of the 100V power supply at home, and there were no problems at all with operation.
[Points to note]
Welding can be easily done at home, but of course it is a dangerous process and requires solid knowledge.
The opening photo was taken indoors, but of course work in a place where Garageetc. will not spread the fire.
Fireproof sheets are also needed to cover the shaded surfaces and surroundings.
How did it compare to other products?
I have rented equipment and had a little experience with 200V semi-automatic welding, but it seemed to me that there was no difference.
I think I'm just a novice and can't tell much difference.
【Review】
It is insanely easy to weld at home, comes with Wire and leather gloves, and is very affordable.
As a welder that can be used at home, I give it a perfect score of 100! The only regret I have is that it did not include a Tip, so I gave it 4 stars! (Lol)
View detail
Fog Lamp
I was attracted by the angular design, which is rare nowadays, as most of them are round.
I have used it as a Fog Lamp on my Ninja 250SL after small modification. The brightness is enough and the waterproof property is perfect, so it is a recommendation! We are planning to install it on a light truck as well!
View detail
Great for Better Alignment
he alignment marks on my swing arm aren't even close to setting my wheel in alignment with my sprocket and chain. Pretty simple tool for more piece of mind when doing chain adjustments. Works well on my bikes. I put the tool on just to see if my current alignment was good. It is, but the tool confirmed my suspicion that the alignment marks on my swing arm are not stamped symmetrically. I eyeballed it prior to purchasing this tool. If you have calibrated eyesight, an alignment tool isn?t really necessary. But, this is an affordable and useful little device to make the job a tad easier. Would be better if the metal rod was longer.This tool is essential to minimize chain, sprocket wear, and noise. It is kind of a pain to use as you need to remove the chain card to enable setting this up. But once done, my ride is much quieter.If you have deep pockets, I imagine the laser alignment tools would be the way to go.Fast shipping as always too.It comes in a big box, I don't think it's necessary. I want economical shipping.That's why shipping is expensive and subject to extra inspection at customs. View detail
Rim stripe easily affixed
Used for Rim stripe installation on YZF-R6 (2019).
When used for water pasting, Rim stripe can be applied quite accurately and effortlessly.
Some adjustment may be necessary where the rim stripe overlaps.
It is also Large cut to paste with Image to push out air bubbles. Removing air bubbles afterwards is also Large cut.
View detail
Fairly soft
Purchased to quickly wash Tire and Wheel.
If the hose is connected, it can be scrubbed while water is running.
The hair is quite soft and is recommended for a smooth flow around the feet.
The hairs are likely to be defeated by mud, etc.
I received what I was looking for in Brush, which is a good system for this kind of thing.
View detail
Bottle will be dented.
I purchased this product because I wanted to do the Fluid replacement myself.
As per everyone's impressions, use a syringe to set the Bottle's air pressure.
If you lower the Lever, the Bottle will be dented.
It may be better to work while niggling.
View detail
For Wheel and air-cooling fins!
I have not used it in a car wash yet, but I think it is just right for cleaning fins on wheels and air-cooled engines because of the tautness of the Brush. The handle is long, so it will be useful for places that are hard to reach. I think the price is high, but it seems to be durable. Therefore, I give it 4 stars for texture and 3 stars for cost performance. View detail
The same thing as 100s?
[How is it used?
Used to apply or scrape off Remover in paint stripping operations.
Was the one you received as per Image?
Not possible and not impossible as per Image.
I noticed later that it is almost the same as the one sold at 100s?
Are they differentiated by Carbon content, etc.?
How was your experience with it?
Quite easy to use.
Remover is Gel-like and hardens after a while.
When applied with a brush, the tips of the bristles immediately harden and Large strange.
This Scraper can be spread on Beauty and is useful for scraping off the paint when it peels off.
[Points to note]
Paint remover also attacks resin.
Inevitably, the tip of the Scraper will be scraped off by the release agent, so it is practical to replace it with a new one after a certain amount of time.
View detail