Reviews
Swing Arm scale is for reference only
As the title says, the scale on the Swing Arm is for reference only.
I was looking at Motorcycle from behind and noticed that the teeth of Sprocket were somehow closer to the body side of Chain.
Quantity in the Swing Arm scale:Pair (for Left and Right) The position of Chain and Sprocket is not good, even though they are in the same position.
The Chain Alignment Tool was used to straighten the Chain, and the alignment between the Chain and the Sprocket was perfectly aligned, and as a byproduct, the Swing Arm scale was set to "Quantity:Pair (for Left and Right) We found that there was a Gap of about 2-3mm in the
If the alignment of the Chain is not correct, it can cause uneven wear of the Tire and damage to the Sprocket and Chain.
This is a Tool of Recommendation for those who are interested in getting ChainAlignment right!
View detail
Great tweezers
Love these so far. They are a great build quality that feels sturdy in the hand.Works great and made from metal so it's more environmental and sustainable material. Pleased I avoid buying another plastic tool.definitely recommend View detail
Lining Peeled Off Tool, but also useful for peeling off the exterior
The product name is Lining Peeled Off Tool, but it is also useful for removing the exterior.
There are two types of shapes, and the principle of leverage makes it easy to apply force, but it is likely to break if force is applied too much.
It's better to break it before the exterior cracks, though,
PushPins and other difficult-to-remove items can also be removed.
When using the product, cure the contact surface with Curing Tape, etc. before use.
View detail
Nicely made and very useful
Pretty good at holding motorcycle parts or softer metal you don't wish to mar with the vice teeth. I purchased 2 different jaw pads. Plastic and metal. All were very similar. They give multiple ways to hold part secure with damage. Good quality and durable. Retention magnets are weak though, slight bump and they fall off the jaws. Holding round rods at an angle or parallel to the teeth, not so much. They will warp if given too much torque. View detail
should have got these a long time ago,Great product
Nice tools from KTC. They are well made and effective. They wood handle is nice and the packaging serves as a storage case for them. these are amazing! These little gasket scrapers work great. I actually prefer them over most other kinds in my tool box. Ive used them on everything from bikes to jeeps to and they have always worked pretty good. you just need to be extra careful on aluminum gasket surfaces with them. Since they are steel they can gouge your aluminum gasket surface if you dont know how to use them and not careful. View detail
Universal Product
I bought it to clean the parts that were soaked with oil.
It may be a little soft, but I will adjust it by cutting it a little.
View detail
Suitable for portable, not stationary
Purchased to adjust air pressure at Circuit.
Since the capacity is small, filling a single tire is not efficient because the air runs out. TradeOff is unavoidable if the limited loading space is to be used effectively.
It is not a quiet Type and is not suitable for home use.
The 100V power supply type is perfect for use as a portable Small Type Compressor with a generator.
Other negatives are reasonable considering the price and Size.
View detail
Finishing touches change with tools.
[How is it used?
I am always playing and playing with Enduro on my off-road motorcycle. I am not a very good rider, so I always try to keep my motorcycle beautiful. If I am not a good rider and my motorcycle is dirty, I can't even look at it.
WAKO:Wako's Car Wash Brush for everyday car washing PP Predecessor (https://www.webike.net/sd/23289227/) I used to wash the garnish with this and wash the details with some random Brush around the place. I found this product that looks like it would appear in an Insta car wash video, so I bought it.
Was the one you received as per Image?
Brush is softer than I expected. Material seems to be poly.
How was your experience with it?
I think it is just right for around the LINK. I think it is a good idea to brush areas where you don't want to apply too much high pressure to prevent Grease from leaking out.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is a RECOMMENDATION because a serious car wash will not only keep your car Beautiful because it is easy to find places that are poorly maintained, but it will also prolong the life of your Motorcycle. It is good to have the right tools to make it fun.
View detail
Car wash is a tool
[How is it used?
I play and play with Enduro on my Off-road motorcycle. I am not a very good rider, so I always try to keep my motorcycle beautiful. If I am not a good rider and my motorcycle is dirty, I can't even look at it.
WAKO:Wako's Car Wash Brush for everyday car washing PP Predecessor (https://www.webike.net/sd/23289227/) I used to wash the garnish with this and wash the details with some random Brush around the place. I found this product that looks like it would appear in an Insta car wash video, so I bought it.
Was the one you received as per Image?
The bristles of the brushes were stiffer than I had expected, but not too hard. The material seems to be made of pig bristle.
How was your experience with it?
It is best suited for washing the top bridge and other in-built parts of the car. The bristles are pig bristle and soft, so it is also good for use around the meter of on road vehicles.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is a RECOMMENDATION because a serious car wash will not only keep your car Beautiful because it is easy to find places that are poorly maintained, but it will also prolong the life of your Motorcycle. It is good to have the right tools to make it fun.
View detail
I was able to exchange Spring with peace of mind.
A special tool is required to remove the rear suspension spring.
There is a special Type tool that attaches directly to the spring and shrinks it, but I fear that it may come off when tightened and the special tool may fly away.
This special DAYTONA tool was able to work safely and stably because it uses ThailandBelt to tension the springs and fix the rear suspension mounting points.
In the actual work, a special tool is used for Rear suspension in quantity.:Set to shrink the Spring and remove the Lockling at the bottom end.
The spring replacement is completed when the new spring to be replaced is shrunk in the same manner, and the Lockling is attached and put back on.
The work was comfortable using solid, specialized tools.
It is a dedicated tool that is used only very occasionally, but it would be nice if the price were lower.
View detail
Aluminum Pipe is looking sharp.
I bought a long aluminum pipe for my own parts for CRF250RALLY. I used to cut it with an iron saw, but I think it is better to use SK11's Pipe cutter for clean cutting.
After deciding the length to be cut, use the Magic to mark a point on the Pipe cutter, place the round blade of the Pipe cutter on the point, and lightly tighten the Grip. When the markings are visible, turn the Pipe cutter further. You will feel resistance when you turn it, but when it becomes weaker, the amount of turning will be cut. If you continue to rotate the Pipe cutter, the Pipe cutter will make a horizontal gap, so you will need to increase the depth of the cut by pulling out the round blade further. After cutting, pull out the chamfering blade attached to the body to chamfer the inside of the pipe.
When determining the length of the cut, it is better to make adjustments by considering the thickness of the blade. In the case of an iron saw, the object is cut off with the tip of the blade on a line Image, but with a round blade, Quantity:Pair (for Left and Right) The body has a roller to hold the pipe in place. The body has a roller to hold the pipe in place. If the object is soft aluminum, the roller will leave marks if it is tightened too hard. If the holder of the round blade starts to wobble during use, which is rare, remove the grip cover and tighten the loose screws. The first marking is easy with aluminum, but difficult with steel, and be careful with plating pipe, which is slippery even after marking. The chamfering after the work is simple. The final chamfering should be done with sandpaper or a file or you will get hurt.
This tool is designed for Pipe, but I also use it for cutting and marking aluminum rods with an iron saw. The process is the same, but there is a limit to how far a round blade can cut a round bar. If the marking is on a line, it is easier to apply the cutting edge of the iron saw and fix it in place. In this case, the length of the cut is adjusted with a margin for the tip of the blade.
If you are a beginner, it is difficult to cut a round Pipe cleanly with an iron saw. It depends on the work environment, but it is a good tool to have.
View detail
Recommended for Full Cowl Motorcycle!
Since my car is a Full Cowl, I have used many different Lining Peeled Off Tools to remove the cowl, but this product is very easy to use! I like that the resin used for the handle is different from the material used for the peeled-off part of the gold part! It is quite sturdy and I think it will last for a long time! View detail
Point Utilization
This time, my Point expired, so I bought TapTool, which I had wanted for a long time.
Repairing Bolts and Nuts that have become reluctant due to daily maintenance of cars, motorcycles, and othersMaintenance.
View detail
Easy home welding
[How is it used?
When we restore old vehicles, we find parts that are missing or damaged, and we have wanted a welder for a long time, but we have not been able to get our hands on one.
That's when he encountered Solidly's Bolt and completely licked his head, even breaking the Folding Bolt without tool.
I'll weld Bolt off!" I was so enthusiastic that I bought it with great enthusiasm.
Was the one you received as per Image?
Usually Quantity:Non-gas mild steel wire, tip, and leather gloves at the same price as the Set.:I was looking for a set of items, but I couldn't find a Tip anywhere.
I looked between the cushioning material and inside the product, and the Wire and leather gloves were indeed included, but only the Tip was missing. Well, such a trivial matter is fine.
How was your experience with it?
Doing the welding yourself. (almost) First time.
Since I had watched from nearby many times from preparation, I was able to start welding without any hesitation by following the included instructions.
I was impressed even before I started using it, partly because the instructions are easy to understand, but also because the structure is very easy to understand.
We tested the welding with an appropriate steel plate and went to work. Although the welding was done in a very amateurish manner, we were able to safely weld the bolt together and remove the bolt.
It took 30 minutes from the start of preparation to the removal of Bolt by an amateur. This is amazing.
Since it is semi-automatic welding, one hand is free to do some holding.
Moreover, the Breaker did not drop out of the 100V power supply at home, and there were no problems at all with operation.
[Points to note]
Welding can be easily done at home, but of course it is a dangerous process and requires solid knowledge.
The opening photo was taken indoors, but of course work in a place where Garageetc. will not spread the fire.
Fireproof sheets are also needed to cover the shaded surfaces and surroundings.
How did it compare to other products?
I have rented equipment and had a little experience with 200V semi-automatic welding, but it seemed to me that there was no difference.
I think I'm just a novice and can't tell much difference.
【Review】
It is insanely easy to weld at home, comes with Wire and leather gloves, and is very affordable.
As a welder that can be used at home, I give it a perfect score of 100! The only regret I have is that it did not include a Tip, so I gave it 4 stars! (Lol)
View detail
Fog Lamp
I was attracted by the angular design, which is rare nowadays, as most of them are round.
I have used it as a Fog Lamp on my Ninja 250SL after small modification. The brightness is enough and the waterproof property is perfect, so it is a recommendation! We are planning to install it on a light truck as well!
View detail
peeling off
I purchased this product in the hope that it could be used to remove Packing, Rubber, and Sealants.
The tip of the blade is a size and both tips are taper shaped, so it seems to be good for use.
View detail
It can be used normally
Four types of Rivet are included, even for beginners.
Four types of Nose peas are also included.
Of course, you can Rivet properly.
There are expensive products, but this is enough for amateurs.
View detail
Fits: その他 Universal, その他 Universal
The length is good and ideal for Tappet adjustment!
I wanted to adjust Tappet and could not find Thickness Gauge, so I had to buy a new one!
I was looking for something as long as possible and easy to use with a small number of sheets, and I found what I was looking for!
Even in narrow and hard-to-access places, it makes the most of its length and bend to make a quick and easy decision!
My favorite
View detail
Purchase by wash for Vehicle途
[How is it used?
I bought it from Wheel Wash for Vehicle.
Was the one you received as per Image?
I use it on my motorcycle and car, and it lifts dirt well in both applications.
How was your experience with it?
However, it is not good at cleaning fine or deep areas, so it was used to wash surfaces in large quantities.
View detail
Great for Better Alignment
he alignment marks on my swing arm aren't even close to setting my wheel in alignment with my sprocket and chain. Pretty simple tool for more piece of mind when doing chain adjustments. Works well on my bikes. I put the tool on just to see if my current alignment was good. It is, but the tool confirmed my suspicion that the alignment marks on my swing arm are not stamped symmetrically. I eyeballed it prior to purchasing this tool. If you have calibrated eyesight, an alignment tool isn?t really necessary. But, this is an affordable and useful little device to make the job a tad easier. Would be better if the metal rod was longer.This tool is essential to minimize chain, sprocket wear, and noise. It is kind of a pain to use as you need to remove the chain card to enable setting this up. But once done, my ride is much quieter.If you have deep pockets, I imagine the laser alignment tools would be the way to go.Fast shipping as always too.It comes in a big box, I don't think it's necessary. I want economical shipping.That's why shipping is expensive and subject to extra inspection at customs. View detail