Reviews
Fits: KTM 690ENDURO R, KTM 690DUKE R, KTM 690DUKE, KTM 390Duke, KTM 250DUKE, KTM 200DUKE, KTM 125DUKE, KTM 690ENDURO R, KTM 690DUKE R, KTM 690DUKE, KTM 390Duke, KTM 250DUKE, KTM 200DUKE, KTM 125DUKE
It was a quick response.
[How is it used?
good
How was your experience with it?
I don't know yet.
How did it compare to other products?
I don't know yet.
[Points to note]
None
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
K&P OEMRepair Parts.
I have not used it yet, but when I was looking for it, I found it in this shop.:5pcs. ordered.
I thought it was a Universal Product, but it was an OEM Product. I thought it might be a Universal Product, but it was an OEM Product.
Also, since there was a PayPaySilver bank for transferring money, there were no transfer fees.
I bought in bulk, so I think it will last for a while, but I would use it again.
Thank you very much
View detail
For GB250 CLUBMAN
O-rings are indispensable for replacing oil in old cars.
I have used K-PIT's O-rings on other motorcycles with no problems and they are my favorite O-rings. I don't feel any physical sensation, but I think it is a good product.
View detail
Fits: SUZUKI AVENIS125, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI Address125, SUZUKI swish, SUZUKI BURGMAN STREET125EX
No different from OEM
I think the product is almost the same etc. as OEM. View detail
Crankshaft Hole Cap O-Ring for the Grom
About quality and texture: I am happy with the quality of the crankshaft hole cap O-Ring, made from a soft flexible rubber to help create a good seal. About the feeling of use: The previous owner had significantly over tightened the crankshaft cap and damaged the O-Ring, the K-Pit O-Ring fitted perfectly with zero leaks. Products to buy together: The timing hole cap O-Ring from K-Pit would also be desirable to purchase along side this crankshaft hole cap O-Ring as they are ideal to replace together after you have finished checking your valve clearances. Difficulty of installation: The process to install just takes a few minutes, remove the crankshaft hole cap, be sure to discard the old O-Ring as they can remain in the hole on the engine case and then fit your new O-Ring that has been lubricated lightly with engine oil. Do not over tighten the plug as the manual only calls out for 8 N.m. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit that was in stock and ready to ship unlike the Honda O-Ring but the K-Pit O-Ring is slightly more expensive. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: View the Kitaco engine tuning and maintenance parts catalog to see what other maintenance parts K-Pit have to fit the Grom and the Monkey 125. View detail
Timing Hole Cap O-Ring for the Grom
About quality and texture: I am happy with the quality of the timing hole cap O-Ring, made from a soft rubber to flex and seal to create a good seal. About the feeling of use: The previous owner had significantly over tightened the timing cap and damaged the O-Ring, the K-Pit O-Ring fitted perfectly with zero leaks. Products to buy together: The crank hole cap O-Ring from K-Pit would also be desirable to purchase along side this timing hole cap O-Ring as they are ideal to replace together after you have finished checking your valve clearances. Difficulty of installation: The process to install just takes a few minutes, remove the timing hole cap, be sure to discard the old O-Ring as they can remain in the hole on the engine case and then fit your new O-Ring that has been lubricated lightly with engine oil. Do not over tighten the plug as the manual only calls out for 6 N.m. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit that was in stock and ready to ship unlike the Honda O-Ring and the K-Pit O-Ring was cheaper. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: View the Kitaco engine tuning and maintenance parts catalog to see what other maintenance parts K-Pit have to fit the Grom and the Monkey 125. View detail
Dedicated O-ring for Cartridge
Two K&P S1s and one S9 are attached to each body.
The O-rings here are not so much to be replaced as they are to be
The O-ring that was attached from the beginning during the recent Filter cleaning is a little
It was almost torn, so it was included as a spare when I purchased the Filter.
I tried to replace it with an O-ring, but it must have deteriorated over time.
It was a little swollen and difficult to get into the Filter groove.
(I was able to get away with it by shrinking it down to an even etc. in the mizo...)
It's probably about four years old, so deterioration is inevitable.
As I was saying, the O-ring that I had saved to use when the time came to use it came.
If you can't use it, you can't talk about it, so I'm going to use a couple of them as Stock.
I bought it
This O-ring is a special product, so it would be better to have a spare in advance.
I think I will replace them regularly from now on regardless of damage.
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X
It's a Repeat session.
The others are thin, but a little thicker and more solidly mounted than the others. View detail
Fits: KTM 690ENDURO R, KTM 690DUKE R, KTM 690DUKE, KTM 390Duke, KTM 250DUKE, KTM 200DUKE, KTM 125DUKE, KTM 690ENDURO R, KTM 690DUKE R, KTM 690DUKE, KTM 390Duke, KTM 250DUKE, KTM 200DUKE, KTM 125DUKE
Convenient!
People who ride around KTM do maintenance by themselves, so they can easily buy this quantity.:Set is really useful. This is because they are common to everyone from the 125 DUKE to at least the 690 DUKE. That's why KIJIMA has been selling it for a long time. View detail
Fits: KTM 125DUKE, KTM 200DUKE, KTM 390Duke, KTM 125DUKE, KTM 200DUKE, KTM 390Duke
Best in the world!
Purchased because I changed the Oil for the second time after delivery of the car.
As for the seal power, I can't say yet since it has been about 2 weeks since the replacement, but I have high expectations for the future.
The shape is not particularly problematic, so I would like to use this to replace Oil in the future.
Cospa is the strongest.
View detail
Fits: KTM 690ENDURO R, KTM 690DUKE R, KTM 690DUKE, KTM 390Duke, KTM 250DUKE, KTM 200DUKE, KTM 125DUKE, KTM 690ENDURO R, KTM 690DUKE R, KTM 690DUKE, KTM 390Duke, KTM 250DUKE, KTM 200DUKE, KTM 125DUKE
Cospa strongest
Purchased as I replaced Filter for the first time since delivery of the car.
Quantity with this Gold amount:1 Set of 2pcs. so I think it is quite reasonable.
As for the seal power, I can't say yet since it has been about 2 weeks since the replacement, but I have high expectations for the future.
The texture was not bad, and I felt like the cosmetics were good.
View detail
Fits: YAMAHA XT250 X 5C11-3 FNo: DG11J, YAMAHA TW225 E 5VC1-7 FNo: DG09J, YAMAHA TW200 5LB1-2 FNo: DG07J, YAMAHA TW200 5LB1-2 FNo: 2JL, YAMAHA TW200 4CS1-6 FNo: DG07J, YAMAHA TW200 4CS1-6 FNo: 2JL, YAMAHA TW200 2JL FNo: DG07J, YAMAHA TW200 2JL FNo: 2JL, YAMAHA SRX600 3SX1 FNo: 3SX, YAMAHA SRX400 3VN1-5 FNo: 3VN, YAMAHA SRX400 3VN1-5 FNo: 1JL, YAMAHA SRX400 3HU1 FNo: 3VN, YAMAHA SRX400 3HU1 FNo: 1JL, YAMAHA SRX400 2NY FNo: 3VN, YAMAHA SRX400 2NY FNo: 1JL, YAMAHA SR500 3GW1-9 FNo: 1JN, YAMAHA SR400 3HTA-W FNo: 1JRH03J, YAMAHA SR400 3HTA-W FNo: 1JRH01J, YAMAHA SR400 3HTA-W FNo: 1JR, YAMAHA SR400 3HT1-9 FNo: 1JRH03J
Replace it every time because it's inexpensive.
Replace it with a new one every time to prevent oil leakage. View detail
Fits: YAMAHA FZ1 S 3C3G FNo:RN21J, YAMAHA FZ1 S 2DV7 FNo:RN21J, YAMAHA ROAD STAR 1600 5JA3-6 FNo:VP12J, YAMAHA XJR1200 4KG1-4 FNo:4KG, YAMAHA XJR1300 5EA1-9 FNo:RP01J, YAMAHA VMAX 1700 2S3V FNo:RP22J, YAMAHA VMAX 1700 2S37 FNo:RP22J, YAMAHA FZ1 S 2D1A-X FNo:RN21J, YAMAHA ROYAL STAR 1300 4WY1-6 FNo:4WY, YAMAHA VIRAGO 400 3JB1-8 FNo:2NT, YAMAHA VMAX 1200 3UF1-5 FNo:3UF, YAMAHA XJR1300 5EA1-9 FNo:RP03J, YAMAHA XJR1300 5EA1-9 FNo:RP17J, YAMAHA XJR1300 5EAG-S FNo:RP01J, YAMAHA XJR1300 5EAG-S FNo:RP03J, YAMAHA XJR1300 5EAG-S FNo:RP17J, YAMAHA XJR400 S 4HME-L FNo:RH02J, YAMAHA XJR400 R 4HMC FNo:4HM, YAMAHA XJR400 R 4HMD FNo:4HM, YAMAHA XJR400 4HME-L FNo:RH02J
v-max 2LT Cooling Water L-Pipe
We were having problems with coolant leakage from the L-shaped Pipe, but the leakage has completely stopped. View detail
Fits: YAMAHA AxisZ LTS125, YAMAHA AxisZ LTS125C, YAMAHA AxisZ LTS125, YAMAHA AxisZ LTS125C
Quantity:I'm glad it's a Set.
Quantities needed to change engine oil:We are thankful that we have it all in the Set.
The quality is the same as OEM, so you can use it with confidence.
View detail
Used in 92 groms
Used to replace the DrivenEngine Cover on a 92 Grom.
It's only about 50mm, but I don't think there are any problems with the oil seeping out.
View detail
Fits: KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1A FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [Super Sherpa] KL250-G1A FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1A FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [Super Sherpa] KL250-G1A FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-000001-
Oil Filter and Quantity:Set
Always quantity when replacing Oil Filter:Set.
I have not had any problems with the Oil seeping out.
View detail
O-Ring 12mm
About quality and texture - Excellent quality, no issue with the O-ring. About the feeling of use - Great fit and functioning as intended. Products to buy together - Purchased together with ball bearing, product # 00-01-1011. Difficulty of installation - Easier then easy, just added a little engine oil to the O-ring and it slips straight on. Cost performance and comparison with other products - Expensive for sure a little O-ring, I am sure Webike would have an alternative from another brand but I am yet to reasearch this. About shipping and packaging - Cheap shipping cost, on time delivery and safety packaged. Any concerns, cautions, or advice when purchasing - If you decide to search for a cheaper alternative you are looking for a 12mm O-ring. View detail
Repair O-Ring for Oil Filter Cover
About quality and texture - Excellent quality, no issue with the O-ring. About the feeling of use - Zero oil leaks from the oil filter cover, so it is doing its job. Products to buy together - Add one of these repair O-rings to the cart when ordering a few oil filters. Difficulty of installation - Easier then easy, just added a little engine oil to the O-ring and it pops straight on. Cost performance and comparison with other products - Reasonably prices from SP Takegawa, I am sure Webike would have an alternative from another brand but I am yet to reasearch this. About shipping and packaging - Combined shipping cost was great and shipping time was spot on. All items arrived safety due to the great packaging, even when the box was slightly damged during its journey. Any concerns, cautions, or advice when purchasing - If you decide to search for a cheaper alternative you are looking for a 40mm O-ring. View detail
Fits: SUZUKI GS50, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZK7-8 FNo: CK45A-100026-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZK7-8 FNo: CK44A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZK7-8 FNo: CK43A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZK7-8 FNo: CK42A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZK7-8 FNo: CK41A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZK3-6 FNo: CK45A-100026-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZK3-6 FNo: CK44A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZK3-6 FNo: CK43A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZK3-6 FNo: CK42A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZK3-6 FNo: CK41A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZAL3-4 FNo: CK45A-100026-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZAL3-4 FNo: CK44A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZAL3-4 FNo: CK43A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZAL3-4 FNo: CK42A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZAL3-4 FNo: CK41A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZAK9 FNo: CK45A-100026-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZAK9 FNo: CK44A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZAK9 FNo: CK43A-100001-, SUZUKI SKY WAVE 400 [SKY WAVE] AN400ZAK9 FNo: CK42A-100001-
I don't know, but...
These are the parts that are required when replacing the Element of the CUB.
I don't know how it works, but it has a nice glossy texture.
I don't know the difference in cost between this product and the OEM product, but it seems to be better in terms of quality.
View detail
Fits: KTM 690ENDURO R, KTM 690DUKE R, KTM 690DUKE, KTM 390Duke, KTM 250DUKE, KTM 200DUKE, KTM 125DUKE, KTM 690ENDURO R, KTM 690DUKE R, KTM 690DUKE, KTM 390Duke, KTM 250DUKE, KTM 200DUKE, KTM 125DUKE
svartpilen250
I used it on my svartpilen 250. It is working fine. View detail