Reviews
Used in xlr250
The Lever was broken so I replaced it.
It is a little shorter than OEM.
Quantity:Pair (for Left and Right) It is good that it is
View detail
Fits: HONDA CB400FOUR (water-cooled), HONDA CB400FOUR (water-cooled), HONDA CB400FOUR (water-cooled), HONDA VF750 MAGNA, HONDA VF750 MAGNA, HONDA VF750 MAGNA, HONDA VTR250, HONDA VTR250, HONDA NV400, HONDA NV400, HONDA NV400, HONDA NV400, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA GB250 CLUBMAN, HONDA CBR750, HONDA CBR750, HONDA CBR400F
top quality
This item is identical to the original o.e.m. one(s) fitted to my 2001 Honda CB250F. I broke the right hand lever. Couldn't find part under aforementioned model number, but traced it via Honda "Jade" which has many similarities. View detail
Fits: YAMAHA XJR1300
Spare parts but it is not completely compatible
OEM PartsLever Quantity at one price : Pair (for Left and Right) Quantity of : Since Set can be purchased, Cost performance can be said to be excellent. However, for Brake lever it is more fundamental than Adjustable, Parts on Master Cylinder side is Quantity : It is not set. It is only Lever division. View detail
Fits: YAMAHA XJR1300
OEM Standard substitute item
XJR1300 / It is equipped with RP 03J.
Color BALI We also attracted abundant Foldable,
It compromises there for the convenience of the price..
Although it was decided to buy unavoidably from falling damage,
Quantity : Pair (for Left and Right) If it is inexpensive,
As an alternative to OEM,
I think that it is worthy enough.
With a hopeful price range,
If you can have color BALI,
Customer demand may also grow.
View detail
Although it can be mounted on CB 223S, it is necessary to widen the hole of the movable shaft a little
Brake side is so so, Clutch side feel uncomfortable during operation.
When installing the Clutch lever, the hole in the moving part was tight, so it was necessary to widen a bit with Leutor and round bar file.
Details are here → "Our CB 223" http : / / cb223s. web. fc2. com /
View detail
Defective item
I bought it as a reserve Lever.
Because I folded the Clutch lever, I attempted to replace it, the axis is 8 mm and the hole is 7 mm and it is not attachable. Absolutely defective goods.
View detail
There is no attachment problem, Lever inner triangular groove is cooler than OEM
I bought Lever of ADDRESS V 125 G for spare. When falling down in May, it hurt Left SideLever end and replaced with ALBALever. I was able to wear it without problems.
Compared to OEMLever of Right Side, Lever Left is located slightly inside from the rounded end, Δ (triangle) It has grooves, made me think that it is cool as one point of Design and aim for weight saving. Similarly, Right SideLever has a groove of △, and if you exchange both Lever, I think that it is good to take Designative Balance.
View detail
Fits: HONDA JAZZ, HONDA LEAD 50, HONDA LEAD 50, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA gyro X, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA Benly CD90, HONDA Z50 JZ3|3L|JB3|JC6|JB-LB Type 2, HONDA Z50 JZ3|3L|JB3|JC6|JB-LB Type 1
ALBAALBA Lever
I installed it on AF 27 type SUPER DIO. The immovable car is Large mortar, Lever is bent. This DIO was also bent. So it's an exchange. Brand did not pay particular attention, but could be installed without problems View detail
Pons attachment can be carried out only by removing even a Bolt nut.Probably, it just called it the engine performance as expected. Isn't the pure place obtained more simply a Merit?
Pons attachment can be carried out only by removing even a Bolt nut.Probably, it just called it the engine performance as
expected.
Isn't the pure place obtained more simply a Merit?
View detail
It purchased as a Spare parts at the time of a fall. Unlike the vehicle, a Motorcycle is reversed at the point which went on a trip, and a Lever, a Step, and a Pedal are troubled by a crease and modification in many cases. Although it calls in
It purchased as a Spare parts at the time of a fall.
Unlike the vehicle, a Motorcycle is reversed at the point which went on a trip, and a Lever, a Step, and a Pedal are troubled by a crease and modification in many cases.
Although it calls in a road service when it likes especially the Winding road of Yamanaka, things are every day in the waiting for 2~3 hours.
It is putting into the Side bag with a Puncture repair Kit and tools as if it is
.
If it exchanges by itself, they will be the working hours for about only 30 minutes. [ ]
If it is this, the trouble made to the friend who went together does not need to pay the traveling expenses of a road service small and also big-ticket.
All Motorcycle riding is goods make it want you to purchase and to bring at the time of a Touring individually.
View detail
Fits: HONDA NSR250R, HONDA CBR750, HONDA NSR250SP, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA GB250 CLUBMAN, HONDA NSR250SE, HONDA JADE, HONDA CBR750, HONDA NV400, HONDA NV400, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTZ250, HONDA NSR250SP, HONDA VTZ250, HONDA VTZ250, HONDA NSR250SP
The Clutch side was able to use. right-hand side forgot for an authentic positive one to have an Adjuster. right was not able to be used. It is if it does not fall and damage although it incidentally uses for the right of PCX (smile).
The Clutch side was able to use.
right-hand side forgot for an authentic positive one to have an Adjuster.
right was not able to be used.
It is if it does not fall and damage although it incidentally uses for the right of PCX (smile).
View detail
Fits: HONDA XR100 Motard
[Webike Monitor] It purchased in order to exchange, since the tip of a Brake lever has broken by the shop front under maintenance. The Brake-lever side has been satisfactorily attached in the same form as a pure Lever. It will be convenient alth
[Webike Monitor] It purchased in order to exchange, since the tip of a Brake lever has broken by the shop front under
maintenance.
The
Brake-lever side has been satisfactorily attached in the same form as a pure Lever.
It will be convenient although the form was [ a little
Clutch-lever side ] different.
View detail
Fits: YAMAHA TT-R125LW
This price is inexpensive by a right-and-left Set! I think that I will purchase this product again if the Touch also breaks with that which is said from a NORMAL.
This price is inexpensive by a right-and-left Set! I think that I will purchase this product again if the
Touch also breaks with that which is said from a NORMAL.
View detail
The image of is changed by easy attachment! Also making is solid and it is very much satisfied!
The image of is changed by easy attachment! Also making
is solid and it is very much satisfied!
View detail
In order to prepare for an unexpected fall, carrying of the reserve of a right-and-left lever is indispensable. As a lever for bandit 1250 which can be bought with Webike, this right-and-left set is cheap. As insurance, it is enough. Although
In order to prepare for an unexpected fall, carrying of the reserve of a right-and-left lever is indispensable.
As a lever for bandit 1250 which can be bought with Webike, this right-and-left set is cheap.
As insurance, it is enough.
Although it is the bandit 1250 said for there to be little bottom space of a sheet incidentally, it can store one lever at a time to the overhang space of the right and left of a rear cowl.
View detail
Fits: HONDA XR100 Motard
It attached to XR100 motard. It is attached although form is different in it being pure. However, die length is slightly short. Only three fingers start as it understands with a photograph. For the reason, a clutch feels it heavy. If i
It attached to XR100 motard.
It is attached although form is different in it being pure.
However, die length is slightly short.
Only three fingers start as it understands with a photograph.
For the reason, a clutch feels it heavy.
If it thinks as a reserve when something is, I will think that it is good.
It is not so expensive.
View detail
It purchased to KSR-2. When a price and form are further said, how to break is also normal and about 1 clue. However, probably, a generous direction will be good to have somewhat more mostly by a spare, since the prices of brand-name parts are als
It purchased to KSR-2.
When a price and form are further said, how to break is also normal and about 1 clue.
However, probably, a generous direction will be good to have somewhat more mostly by a spare, since the prices of brand-name parts are also going up KSR-2 which is a discontinued car soon.
View detail
Fits: YAMAHA Majesty 125
Since the contacting parts of the stop lamp sensor of a front brake lever are worn out and the stop lamp also turned on idling, it exchanged for right-and-left coincidence on the occasion. Since there was also no prejudice called especially Colet ! fo
Since the contacting parts of the stop lamp sensor of a front brake lever are worn out and the stop lamp also turned on idling, it exchanged for right-and-left coincidence on the occasion.
Since there was also no prejudice called especially Colet ! for the moment, when it searched by normal and the engine performance like equivalent, since this lever set was cheap, it purchased here.
As a lever, it is almost the same as normal.
However, the stopper of simple parking which takes the side of a rear brake lever was not a smooth motion like [ a motion is astringent and ] normal.
Is it touch of [ carry out grease up and / very ] or?
Since he is seldom using it usually, if it is considered as the function, he will think satisfactory kana, but I think that it changes here by people.
View detail