Reviews
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
slightly short
The OEM Product No. was checked and it fit, so I purchased it, but it was about 10 cm too short. View detail
Fits: KAWASAKI KSRII, KAWASAKI KSRI, KAWASAKI KSR80, KAWASAKI KSR50
I diverted it to Wolf250...
I was looking for an extension cable for my friend's Wolf250, but all the manufacturers were out of stock, so I looked for a substitute and bought this cable. I was looking for a replacement for the cable.
Since Wolf250's Cable has horizontal type thailand cords at both ends, it was difficult to find a Cable that could be substituted.
When I was looking for Webig's impressions, I found an example of a Cable for KSR2 that has a horizontal thailandico shape at both ends and is used for ZEPHYR750 or something like that, so I decided to buy it.
The OEM length of Wolf was about 950mm between the Outer and the Outer of KSR2 was 920mm, 30mm different from KSR2. I ordered a cable that is 150mm longer than the KSROEM Length.
We were told to wait a month for delivery due to lack of stock, but surprisingly it was delivered right away.
I immediately handed it to a friend for fitting, but unfortunately, the wire length from the M8 adjusting screw on the clutch side was too short to use.
If the angle of the Release is shifted and forced, it seems to be possible to use Limit.
They will keep it as a spare part since it is not useless.
I'll look again to see if I can substitute something else.
Please let me know if you have any information on ClutchLong cables that can be used with Wolf250 or RGV250.
Incidentally, it seems that RCEngineerRing's Extension Cable has already run out of things.
View detail
I would like to see an assortment in 5 cm increments.
Purchased to change the OEM Handlebar of a MONKEY125 to a Handlebar Up Type.
I bought a 200Millimeter long, but I really wanted a 150mm longer one.
No complaints about the feel of the product. 。 Sliding was good even without going through Oil.
View detail
HURRICANEClutch Cable
Clutch Cable was cut off.
I tried to buy OEM Product!
HURRICANE's Clutch Cable is less expensive.
I bought it instantly!
It's a safe Manufacturer, so it's a Recommendation!
View detail
I bought the same one as before.
Quantity when the Handlebar was previously replaced.:Longer Clutch Cable that came as a set.
I don't have much to say in detail because I just purchased the same product in Single Item, but it helped me because the Clutch, which was very stiff, became very light.
View detail
I'm happy with the result, but ...
md30_BAJA. 。 I found a frayed wire on the Lever side, so I ordered a standard length, which is fixed with a WireBracket between the Engine and the Seat, and the end of the Wire is connected to the Clutch. (I think that the) WireBracket is loosely bent. (30°? Elbow) The one I received was a Straight Bracket. I was a little impatient, but was able to install it without any problem. After the replacement, the lever operation became considerably lighter. I would have liked to use a looser Elbow if possible. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY RT, HONDA MONKEY BAJA
Used for Takegawa specula
I had been using the one that came with my Specula Kit for many years and wanted to replace it before it ran out.
I went with a 10 cm shorter one than the Kit one, and it handles nicely and works fine.
View detail
Low FrictionWire for Z 115mm
I had been using Stainless Steel Wire and couldn't tell the difference between it and this product. View detail
Fits: KAWASAKI 750SS Mach IV (H2), KAWASAKI 750SS Mach IV (H2)
They're consumables.
Replaced during Restore.
It is lighter and cleaner than the tired Cable, but not the immensely Large effect, of course. w
No complaints as an item.
Can be used without Trouble
View detail
Haven't used it yet, but...
I was doing a maintenance check before heading out on a touring trip this spring and...
Several wires on the Lever side of the Clutch Wire are broken!
For a moment, my blood ran cold...even though it's only about 16,000Km...
I immediately ordered a Clutch Wire from the Shop where I bought the vehicle.
It took an unexpectedly long time to arrive.
I'm glad I found it before it happened at home, but if it had been cut off far away...
With that in mind, I bought it as a good-luck charm.
I hope you don't have to be on the show.
View detail
Since it was ? time-tested product parts attached wholly, he bought it. A red wire is dressed up and is cool. Although attached and run, it is unchanging in it being pure. But I think that it is durable since the wire is a stainless.
Since it was ? time-tested product parts attached wholly, he bought it.
A red wire is dressed up and is cool.
Although attached and run, it is unchanging in it being pure.
But I think that it is durable since the wire is a stainless.
View detail
Fits: HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50
KITACO Short lever and Quantity:I could use it in Set.
Used when CUB90 was converted to Manual at one time.
I did not like the lever of DAYTONA, so I used KITACO short lever. I was able to pull it.
There was nothing special about it, but it didn't work very well with KITACO's Lever.
The Thailandco part will twist as you use it.
Since KITACO's short lever does not attach Refreshingly even with the company's wire, fitting is not a good idea.
It's similar to …
Oh, by the way, I have a lever that fits this, but the pull force is almost the same as KITACO's short lever?
I think it's rather weak, and I wish DAYTONA had a short lever option.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY RT, HONDA MONKEY BAJA
Clutch Cable replacement
[How is it used?
Used for 88 GORILLA
Was the one you received as per Image?
high
Was the installation difficult?
unspecialized
How was your experience with it?
My last Clutch Cable lasted me about 10 years, so I'm hoping that I can put Oil in the Cable again to make it last longer.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It is a little more expensive than OEM Parts.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
He was very active in waking up the vehicles.
[How is it used?
When I disassembled the VTR250 and reassembled it again, I found that the cable that was attached to it was broken, so I decided to change the whole set.
Was the one you received as per Image?
It's an OEM look with no Custom feel, for better or worse.
Now I think that I should buy OEM, but there is no problem with the length. Well, I can write Impression and get Point.
Was the installation difficult?
No problem with installation. The length is also no problem.
Grease up around Thailandco and finish.
I know it's better to lubricate the inside with wire injector or something, but doesn't it leak when you put it in?
How was your experience with it?
There's no special Touch feeling.
It's normal-of-normal.
Now I just have to see how many years I can keep it … I'm sure I'll get tired of it before then.
[Included Parts:were they on?
Nothing special.
[Was there anything that disappointed you?
Nothing special.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I bought Throttle, Brake hose, and Speedometer Cable together to change a set of Cable. When I change it in one change, the appearance changes at a dash, and it is good.
View detail
Long clutch cable
As for the GSX750s, it seems to be a little lighter than the STD Shape because it has a wider range of handling changes.
However, STD Shape's product has a tube that suppresses the movement of Wire near Lever, but this product doesn't have it, so you may feel the movement of Wire when you move Handlebar, and it may not be bothered by the pull of Lever. The difference of the feeling was heard.
View detail
Fits: HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY)
A little short?
I used it to service a 30 year old GORILLA. 。 It can be installed itself, but the overall length of the wire is about 20mm shorter than the NORMAL wire, which makes it a little difficult to handle. (Functionally, it's not a problem, but I think it would have been even better if it was made the same size as the NORMAL wire. View detail
I'm generally satisfied
I changed the Handlebar of MT-09SP to Fanatic's SUPER LOW I also replaced the Clutch Wire It's good because the length of the wire becomes quite short It was, so I refreshed it
It's very easy to replace the engine side of the OEM engine, remove the OEM's engine side and replace it with a HURRICANE Lever Tie the sides together with Tie Wrap Then pull it off the OEM Clutch Side and it's done
View detail
I think it's good
It's not so much a matter of whether it's good or bad
This is a replacement from NORMAL
It came to our house about two days after we placed the order
That's 5 stars
View detail
Fits: KAWASAKI ELIMINATOR250 V, KAWASAKI ELIMINATOR 250V
Installed normally, you can use it normally
It may be slightly higher. I do not feel that it is particularly light.
I do not understand the meaning of the limit of the number of characters of evaluation.............................................
View detail
It can not be helped more than nothing
The place confirmed after purchase, the inside was a little rusty.
We reviewed the return, but it took about 5 days from order to arrival, so we did not have enough time to spend time taking the time to exchange again, so we used rust inhibitor inside and divide it inside.
Regarding accuracy, it was not bothering me because I got astringent of movement if I made it two or three times back and forth.
View detail