Reviews
Great grip comfort
The OEM Lever for the SV650 is a good or bad bike Level, but this Lever not only looks cool, but I was surprised at the high quality when I held it for the first time after installation!
Installation is easy and takes less than 30 minutes if you have experience with grease up and lubrication of Lever!
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA650R, KAWASAKI VERSYS 650
For NINJA400R
Installed on NINJA400R.
Since it is an important safety part, we asked Motorcycle shop to install it.
The feel of operation, texture, etc. was perfect without any complaints.
If you are not confident about installing it yourself, ask a professional contractor to do so.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA SUPER CUBC125
I purchased this product because I have small hands and Brake lever puts a lot of pressure on my fingers when I grip it.
[How is it used?
I bought a CT110 HUNTER CUB this time, but my fingers hurt when I hold the RightBrake lever.
Maybe it's just me, but my middle finger is a little deformed after many years of use, so it inevitably causes pain when I use it.
So we decided to use this product made by Kanaya, which we have been replacing since the CB era.
Was the one you received as per Image?
Yes, it meets my expectations, it matches the color of my Motorcycle and looks great!
It was just like the plane.
Was the installation difficult?
The OEM lever is removed for installation, but the mounting bolt is not fully removed and the head is stuck in the accelerator wire.
It was difficult to pull it out because it got stuck. After that, once it was removed, it was just a matter of soaking it in, but it was a little difficult.
It took a while, but it was done!
How was your experience with it?
It is easy to use because the user only needs to adjust the position that fits his/her own medical needs with 6 levels of adjustment.
[Included Parts:were they on?
Included Parts:was only Lever, so I didn't have to buy aTouch separately like before, which was a big help!
[Was there anything that disappointed you?
I have no problem with the product itself, but it would look better if the mounting part was the same color.
Other items that would be helpful
If possible, lever should also be installed on the holder side (if it is greased up at the bolt).
I think it's a good idea... If you don't have BrakeGrease, you need to add it (apply it) ?Even if it's just a little bit of s
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The installation point may be a bit tricky to remove the mounting bolt, but you should be careful not to bend the Accelerator Wire part.
as a request
As I mentioned before, a little grease on the lever itself, or a small amount of tube attached to it, would be nice.
View detail
Fits: YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6N, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6
Great
great replacement fits my boom 250cc, you should tottaly get it if u ever break ur brake lever, great item give it a 5 star review View detail
Fits: KAWASAKI ZX-6R, KAWASAKI Z1000R, KAWASAKI Z1000, KAWASAKI NINJA1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Great Value
Great quality for th price, plenty of adjustment to required length. Custom colour mix match perfectly with the custom paint. Easy installation, works well with Huricane bars. Rides well. Fast shipping as always. View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
Easy to use
Easy to grip and use
It looks cool and perfect!
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR
Lever replacement for CBR600RR
[How is it used?
City Riding ~Touring
Was the installation difficult?
Instruction manuals are also available and are extremely easy to follow.
How was your experience with it?
I am up to my ring finger when I use it, so Short is just fine and easy to use.
[Was there anything that disappointed you?
It is not so much a disappointment, but even if the Lever is matted, the Attachment section will be glossy. It may bother some people.
I was not sure whether to choose Blue or Silver for the Adjuster, but I chose Silver because of its harmony with the Bolts around the Handlebar. Personally, I think it was the right choice.
There are six levels of adjustment, but please note that fully locking the handlebar to the furthest position will cause partial interference with the vehicle body.
As a note on installation, I don't think the Instruction Manual mentions it, but it is recommended to apply grease to the areas where the gold elements rub against each other.
Since there is vibration around the handlebar, we also used a screw lock agent to prevent the screws from loosening.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR
Appearance and operability
[How is it used?
City Riding ~Touring
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Instruction manuals are also available and are extremely easy to follow.
How was your experience with it?
I am up to my ring finger when I use it, so Short is just fine and easy to maneuver.
[Included Parts:were they on?
I don't think there are any missing items.
[Was there anything that disappointed you?
It is not so much a disappointment, but even if you choose the matte type, the Attachment part will be glossy. This may bother some people.
Although not specifically mentioned in the Instruction Manual, it is recommended that grease be applied to areas where the gold species rub against each other.
Also, the handlebar section is subject to strong vibration, so a screw lock agent was used just in case.
Note that when the Adjuster is expanded to the maximum Large, some interference will occur. 5 out of 6 levels are Large sturdy.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
Satisfied with high quality and functionality
I installed it on my CT125.
The OEM felt the need to replace it with Other Brand Product since the grip is not adjustable, and selected 3Finger from the stable ZETA.
Since I had already used it on another Motorcycle and was satisfied with the comfort of using it, I did not consider choosing from another Manufacturer.
The grip and feel of the controls are now much better, and I realized once again that you have to choose good quality parts for parts that are always in contact with each other.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
BrakeTouch is also improved
I have used it on my KLX230R and it does not break the lever even after repeated falls, and the touch of the brake lever is improved over the NORMAL, so I installed it on my CRF250L as soon as possible.
With the NORMALLever, when I apply the brake, it feels unreliable or squishy (which is natural since it is an off-road vehicle), but with this lever, I feel that the ease of levering and the construction of the lever improves the touch and makes it easier to control the brake. I think it may be because the lever is positioned closer to the car.
Installation is easy since all you have to do is remove the Bolt and replace it with a NORMALLever, but it would be easier to work with if you loosen the Mirror Holder and change its orientation.
When replacing them, it is better to grease them up properly before replacing them.
View detail
Genuine SP Takegawa Master Cylinder Lever for Honda Monkey 125
I specifically purchased this Kitaco lever as it is a billet one and not a steel one that came on the bike. The customer wanted a billet lever as a replacement anyway due top asmall fall and the lever got scratched pretty badly. I looked a t a few other brands but finally found that SP Takegawa did a cracking deal on this lever so in my basket it went. It was not really hard to find as I just used the search on Webike for this model and narrowed down categories. For what this is actually made of the price was slightly reflected in that but still, really good value from a great brand. With some other parts, my order was shipped using EMS and arrived in 5 days. The lever did comae in the SP Takegawa packaging and was well protected. The design is flawless and a really good take on a classic lever pattern. As this is billet, it is made from one piece of aluminium and you can see that in the lever. The quality is really stunning. A lovely smoothed out surface with plenty of meat on it so it will not break easily. Fitting this to the Monkey bike was just a matter of unscrewing the pivot bolt and replacing the lever. Nothing hard at all. It did surprise me but the lever once fitted does feel like it belongs on the bike anyway. The action is smooth and no notchiness. Very pleased with this purchase. View detail
Fits: KAWASAKI ZX-10R, HONDA HAWK11, KAWASAKI Z1000, KAWASAKI Z1000R EDITION, KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI NINJA1000, HONDA CB1000R, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR SP, HONDA CBR1000RR SP2, HONDA CBR1000RR-R, HONDA CBR1000RR, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI 1400GTR CONCOURS 14
high quality
[How is it used?
I got a VTR1000SP2 from an acquaintance that had been neglected for a long time, and the lever was not OEM, but a cheap type of machined type that looked a little weird when you held it.
I don't like it, it's on Short and I don't like the way it feels against my finger. If I liked it that way, the OEM lever would be that way, and motoGP has that on theirs. So I thought about going back to OEM, but since I usually play off-road, I chose ZETA.
I chose it because it is not a so-called dress-up shape.
We chose this product because our VTR1000SP2 has FrontSection replaced with SC59 CBR1000RR.
Was the one you received as per Image?
The quality of ZETA's sharpening has improved over the years. In the past, the anodized surface would fly off and peel in seconds, but now it is Large and durable.
How was your experience with it?
It is easy to grip and the adjustment mechanism is fine-tuned.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you are a gutsy person who wants to use Remote adjuster, you can buy Flight lever on a top ranking.
View detail
Replaced from 3Finger.
I used to have a 3Finger, but now that I know that only the lever part can be replaced, I decided to go with a 4Finger.
I think in most cases SEROW and others are to be 3Finger, but Merit is also available for 4Finger.
The power of the Lever allows the Brake to work with less force.
When I was using 3Finger, I used my index and middle fingers for Main.
With 4Finger, the index finger is mainly used for Axel, and the middle and ring fingers are mainly used for Brake.
The Accelerator operation can now be performed with finesse.
When delicate operations are required for Brake, the index finger can be used for Brake as in the past.
I feel only Merit now without much Demerit.
3Finger is said to be more resistant to breakage and finger jamming.
And I always have a replacement Lever in case of emergency.
The position of the lever is made to be as far away from the handlebar as possible to prevent it from being pinched.
I was impressed when I switched from NORMAL to ZETA's 3Finger.
When strong braking force is required on the on-road, or when starting up from a small turn on the on-road.
If a subtle Accelerator operation is required, 4Finger feels that Merit is Larger.
Above all, I am glad that I can exchange only the tip of Lever.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25
Good looking and well made
The replacement is only OEM and it looks great! View detail
Fits: BMW R1200RT, BMW R1200RS, BMW R1250RT, BMW R1250R, BMW R1250RS, BMW R1250GSA, BMW R1250GS, BMW R1200R, BMW R1200GSA, BMW R1200GS
self-satisfaction
I bought this lever for my R1200R. I was looking for a lever that wouldn't break when I stand on the ground, and I found this lever. I think it's good to leave the work to the shop because I can't press-fit without a tool. View detail
The feeling of use is double ○.
The way I gripped the lever caused my small and ring fingers to get caught between the lever and my fingers and my grip tended to become loose after standing for a long period of time.
The grip and comfort are good, and the replacement has made driving very comfortable and smooth.
View detail
Unbreakable, easy to operate
The Pivot lever moves in the opposite direction of the grip, making it difficult to break in the event of a fall. The 3Finger has a shorter lever length than the 4FingerType, so it has less risk. I choose 3Finger because I operate the Brake with my index and middle fingers, so the shorter lever is not a problem for me. If you are going to drive on unpaved roads, this is the first part you should put on. View detail
Fits: HONDA CB400F, HONDA 400X, HONDA CBR400R, HONDA CB250R, HONDA CB250F, HONDA CBR250R, HONDA GROM, HONDA MSX125, HONDA CBR500R, HONDA CB500X, HONDA CB300R, HONDA Monkey125, HONDA NS-1, HONDA CBR500R, HONDA CB500X, HONDA CB300R, HONDA Monkey125, HONDA NS-1
Speed La Lever set
Easy to use. Looks good. I like it. View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
black brake lever
It arrived quickly and easy to install, when installing the clutch kit the brake lever came in silver, now both are the same color. I recommend both kits. View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
The build quality is good!!
After all, it's a Zeta.
This is highly satisfactory tuning at a relatively low price.
Replacement work takes just 5 minutes. There was interference between the existing Jetta knuckle guard and the original brake lever, but after replacing it with this product, the problem was resolved, and the three-finger grip is very comfortable.
It is luxurious because it is made of aluminum CNC. For those of you who are hesitating, do it!! -------------------------------------------------- -------- It's Jetan. Tuning is highly satisfied at a relatively low price. 5 minutes of replacement is enough. Existing Zeta Knuckle Guard and genuine brake lever were interfered with, and after replacing this product, the problem was lost and the threading grip was so comfortable. Aluminum CNC is luxurious. Those who are hesitant!! Powered by Google Translator
View detail