Reviews
Fits: その他 Off Road Caliper P2 28 (Code XQ21361), その他 Off Road Caliper P2 24 (Code 122A99021), その他 VR250 Super, Otard, その他 VR250 Enduro, その他 Scrambler, その他 Granpasso, その他 Granpasso, その他 Granpasso, その他 Granferro, その他 GT, その他 Enduro 610, その他 Enduro 250, その他 ED250, その他 E 570 Enduro, その他 CD610., その他 C 570 MX, その他 C 500 MX, その他 C 450 MX, その他 ATK700 Intimidator, その他 ATK620 Intimidator
It works better than ZETA's Pad!
I installed it on my gasgas EC250 which I always use for forest road touring.
I used to use ZETA Brake Pads, but I had a symptom that the brake did not work too well on descents, and my arms would go up when I rode for a long time or during high-load Situations such as Race.
So I started working on improving Brake and the first thing I bought was Brake Pads.
It was not a drastic improvement, but it works better than ZETA's Pad, and it can stop with a little less Speed in Downhill, etc. However, I still have the impression that a little more StopPingPower would be nice.
View detail
Impeccable!
I chose a handlebar 100mm longer than the OEM one to replace the handlebar on my SR400. The movement is smooth and I like it! View detail
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
Cheaper than OEM
I bought this one because it was cheaper than OEM.
There are no exhaust leaks and no problems.
View detail
Fits: HONDA GB250 CLUBMAN, HONDA MVX250F
The texture and shape is so nice that you can hold the Lever all the time!
The adjustment range is quite large, which is convenient, and the large 1-Click angle makes it easy to see the effect. However, the furthest away is too far away to grip, and recently it is too close to full break or full clutch cut.
The color is very nice, I chose Titaniumium color for both Lever and Adjuster, and it matches the traditional atmosphere of GB250 CLUBMAN EXACTLY. I could have chosen a gorgeous color for the Adjuster with Accent, but I think it would have floated around the Handlebar of GB250 CLUBMAN, so I am glad that I chose the same color.
Once, Side Stand didn't go down to the end and I tipped it over, but thanks to Foldable, the lever didn't break! (Lol)
I am satisfied with the WW because the reversible function worked perfectly.
View detail
I think the texture is good.
[How is it used?
I replaced it and ran about 150 km.
The shape of Lever is slightly different from NORMAL, but I soon got used to it.
Was the one you received as per Image?
Almost as Image.
Clutch lever is a little cheap in the Plastic part.
Was the installation difficult?
I am a beginner and it was very easy because there was a video of the exchange on Youtube.
I think anyone with 8mm and 10mm Wrench can do it.
How was your experience with it?
It looks good because we matched the color to the Fork and Wheel!
[Included Parts:were they on?
Grease is not included, so if you don't have it, you should buy it.
[Was there anything that disappointed you?
Plastic part of Clutch is cheap.
View detail
Fits: YAMAHA XVS950CR, YAMAHA XV750, YAMAHA XV750E, YAMAHA SCR950, YAMAHA XV1100, YAMAHA Road Star (R100 ROADSTER), YAMAHA Drag Star (DRUG STAR), YAMAHA BOLT Shoulder Bag-R(A) (Bolt), YAMAHA BOLT Shoulder Bag-R(A) (Bolt), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA BOLT Shoulder Bag (Bolt), YAMAHA BOLT Shoulder Bag (Bolt)
OEM same etc.
No problems, same as OEM. This product is sufficient. No exhaust leaks. View detail
Think in terms of replacement frequency, not Power
I don't think there is anyone who can perceive the increase in inhalation efficiency by 0.5ps at Peak with SEROW in the product description.
I'm more of a wash and reuse kind of guy, but it's a lot more work than I thought it would be.
According to the official procedure, wash with Cleaner→ wash with mild detergent→ dry for a day→ apply Oil→ wait 6 hours and when Oil settles, you can drive.
Almost two days if you follow it exactly? If I wash on Saturday morning, I won't make it in time for Touring on Sunday.
If you're the kind of person who changes filters once or twice a year, OEM replacement would be better.
I guess it's for people who want to go as fast as possible in an hour-long Race to change filters in a month, which is often run in Course.
View detail
I put it on as a spare.
External Fuel filter attached to ESTRELLA.
It has been immobile for a while, and you can often find a little bit of age-related deterioration in various parts of the car. 。
There does not appear to be any fuel seepage, especially in the Fuel Cock area, but there is no denying that the Fuel Cock has deteriorated over time.
The other day, I was worried about the rust in the fuel tank, and although I have removed rust to prevent impurities from entering Gasoline, I am not sure about it, so I will install an additional external type of fuel filter.
Fuel filter
A filter device used in automobiles to filter fine impurities contained in fuel.
It is used for the purpose of removing water, sand, and dust mixed in during refueling, etc., and maintaining sufficient fuel efficiency.
There seems to be a time for replacement, though not up to the air filter.
■ 50,000 km at Carburetor Vehicles
■Injection car with 100,000 km
■Diesel car with 50,000 km
is the standard.
Continued use of the filter past its replacement time will not only clog the fuel filter element and cause a lack of engine output, but will also cause the filter to lose its original function of capturing foreign matter and separating moisture.
[When the fuel filter clogs.
‥
Idling of ▲Engine is unstable.
Engine seems to stop when driving.
▲ Suddenly, Engine stopped spewing.
Failure to start = Engine will not start.
I haven't experienced the clogging of the Filter yet, but considering the distance and age, it should be replaced. 。
In my 90's ESTRELLA, the fuel filter is integrated with the fuel cock and inserted into the tank. That is not so bad, but I wanted to be sure.
I also added an external Type as a spare.
I chose KIJIMA's because it was inexpensive and I had used it before.
The deciding factor was the transparency, which makes it easy to see dirt.
Replacement procedure.
(1) Fuel Cock is turned off
↓
(2) To be sure, Gasoline in the carburetor should also be removed.
↓
(3) Interrupt the fuel filter between the rubber hose connecting the fuel cock and the carburetor.
It is wise to prepare Oil Resistant Hose separately because OEM Hose is not long enough.
↓
(4) Turn on Cook and apply Engine.
Operation check.
Fuel Cock flows by Engine pressure.
after replacement
No problems
They seem to be getting rid of the impurities for sure.
Durability...? I think Large is durable because it is inexpensive and will be replaced with a con stunt.
It is a good idea to have insurance on older Motorcycles.
Installation is also easy.
View detail
Used for MC19 CBR250R
Same standard as OEM, so no problems with installation or performance. View detail
![[for Repair] Silencer Gasket](https://img.webike-cdn.net/catalogue/images/66105/20170107_f46cb8_TS.jpg)
Silencer gasket
I used it when I installed T2RACING's Silencer on Hulk's Chamber, and although the Silencer itself was confirmed to fit, the three M6 mounting pitches were different and the hole on the Flange side needed to be widened by about 0.5mm.
Gasket also naturally has a different Pitch and requires a wider hole.
Some modification may be necessary when using for chambers other than T2RACING.
It functions fine and has no exhaust leaks.
View detail
Fits: YAMAHA XT225.S, YAMAHA XT225.S, YAMAHA XT225E, YAMAHA XT225L, YAMAHA XT225L, YAMAHA XT225LC, YAMAHA XT225LC, YAMAHA XT225W.WE, YAMAHA XT225EC, YAMAHA TT-R225, YAMAHA XT225 SERROW, YAMAHA CELLOW 225, YAMAHA TT-R225, YAMAHA XT225 SERROW, YAMAHA CELLOW 225
It's gory and doesn't move well.
I purchased and installed it thinking it was equivalent to OEM Product.
Normally, the Wire should move smoothly in response to Throttle operation, but this Wire moves with a gurgle and a sense of resistance.
The operation feels as if it were a Wire that has reached the end of its life span.
Wire is also thinner and less reliable than OEM.
There was no point in buying this product.
Rebuy OEM Product.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA CB125R, HONDA CB250R, HONDA CRF250L, HONDA CRF250L, HONDA CRF250M, SUZUKI GSX-R125, SUZUKI GSX-S125
It is good that it is OEM chic Blue. But ….
This is a very dangerous product, even if you step on the rear brake. I was like, "Hey, what's that? Was this IceSkatingLINK?" It doesn't work as well as it should!
It is totally impossible to adjust the speed with the Rear brake at the Left turn and try to go around Small lol.
The quality and texture of the product is OEM-like, which I like.
Unfortunately, I have reverted back to Red Pad.
View detail
It got brighter.
Replaced Headlight Bulb on Z125PRO.
The purpose was not only to make the engine brighter, but also to reduce the load on the battery (power saving). The Z125PRO had LED lights from the beginning, so there was no need to replace the tail lamps. I thought about replacing the blinker light because it has a normal bulb in it, but I decided not to do it because the blinker relay seems to be built into the meter and it would be complicated to change it to LED. This time, I decided to replace the Headlight Bulb and the Position Lamp with LEDs, and for the Headlight, I chose this product, which was the cheapest among the Sphere Light products.
The replacement work was as simple as removing the headlight cowl and replacing the valve with the original one, and since the valve is compact, there were no problems with installation.
As for the feeling of use, the light is bright enough and feels very bright, probably because the light is whiter. I was able to drive safely at night. I was not bothered by the dispersion of the light. Unfortunately, there was not enough of an energy saving effect that I could really feel.
Compared to when we replaced the LEDValve on our ZRX1100 a few years ago, low-cost products are now on the market, and the hurdle for replacement has gone down. If you are concerned about the brightness of your lights, we recommend replacing them with LEDs.
View detail
air access
The package was received in excellent condition and in addition to all the contents being well protected, the item did not suffer any type of damage, and was also delivered on the exact date indicated at the time of making the purchase. View detail
Fits: HONDA CRF250M, HONDA PCXe:HEV, HONDA PCX, HONDA PCX160, HONDA PCX150ABS, HONDA PCX HYBRID, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF250 RALLY LD, HONDA ADV150, HONDA ADV150, HONDA ADV160, HONDA CRF250 RALLY, HONDA CRF250 RALLY LD, HONDA CRF250L, HONDA CRF250M, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX150
Stiff
It is somewhat stiff, and I am concerned about the feeling of the Pad being scraped during Brake.
The Red Pad went away very quickly, so I will use it with high hopes for durability.
View detail
I am satisfied with the limited
I am grateful to still be able to purchase this product as it is an older Motorcycle and parts are limited. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Ninja1000SX, KAWASAKI VERSYS 1000
Replacement is easy.
ninja1000 is a Quantity:Pair (for Left and Right) Remove the Upper Cowl of the BoltQuantity before Tank:Remove the 2pcs and lift it up to reveal the air cleaner box. Next, remove the screws around the box with a Phillips screwdriver and remove the lid to replace the air filter. This filter is just fit like the OEM one. View detail
Fits: HONDA CMX/REBEL 450, HONDA CB125TD, HONDA CB125T, HONDA XL600V Transalp, HONDA XL600V Transalp, HONDA VT500FT Ascot, HONDA VP750CH Custom, HONDA VL750R, HONDA VFR400Z, HONDA VF750S, HONDA VF750F, HONDA VF750C V45 Magna, HONDA VF750C V45 Magna, HONDA VF700S Sabre, HONDA VF700F Interceptor, HONDA VF700C Magna, HONDA VF700C Magna, HONDA VF500F, HONDA VF500C V30 Magna, HONDA VF400F
Brake Pads Replacement
I used VesrahResin pad for the first time and it worked well enough for city driving and touring. Although the mileage is still low, the brake squeal has stopped. I would like to check the effectiveness and the aggressiveness to the rotor in the future.
If the results are good, we would like to continue using it.
View detail
Attached to Glass Lens with Cut
I put it on my old CIBIE CutGlass Lens, which is 4500K, but it is not too white, which is good. I heard that cheap lenses may scatter light because they are old, but this was not the case, and it became brighter anyway. View detail
It was just like the image.
I have just purchased a DDR−S100 with KAMUI3 for the purpose of fixing the Wiring to operate it as a HelmetCamera.
My DDR−S100 was modified to be able to cut the cord in the middle and connect it with Waterproof Coupler after the USB cord was disconnected. The third image shows the Helmet side. By connecting the other side of the cord connected to the Mobile Battery to this side, the cord does not get in the way when attaching and detaching the Helmet.
This time, when I use KAMUI3 for motorcycle commuting, I thought it would be better to have a DriveRecorder, so I decided to install DR−S100 on my helmet, and selected this product as just the right one to fix the Power Cord.
This 3mm TubeHolder was not bad looking and had just the right diameter to move it a bit against the thickness of the Wiring.
I have used 5mm diameter ones in the past, but they can also be cut and used, and I think they are quite user-friendly Parts. However, the adhesive strength is not very strong, so you need to be careful where you apply it. If it comes off, I will reapply with a stronger double-sided tape.
View detail