Please login to check coupons
Product Detail
Description
Washable and reusable!
High Intake Efficiency Air FilterWashable high intake efficiency air filter.
Unlike the OEM dry filter, it can be used repeatedly by caring for it with special air filter cleaner and filter oil.
They withstand dusty off-road driving and are cost-effective because they can be reused instead of discarded.
Compared to the OEM, the new model improves not only the intake efficiency but also the adsorption effect of sand and dust.
Increased intake efficiency also contributes to increased horsepower.
The filter is strong enough to withstand repeated washing and air blowing, and is resistant to high temperatures.
[Recommended cleaners and oils]
・MAXIMA Air Filter Cleaner
・MAXIMA FAB1 (air filter oil)
High quality non-woven fabrics are used.
Steel mesh coated with galvanized and epoxy resin sandwiches the non-woven fabric, making it resistant to deformation even with intense air intake and fiber expansion.
In addition, it is heat resistant and can withstand temperatures as high as 140 degrees Celsius.
[Horsepower test results (bike used: SEROW 250)]
Compared to the stock unit, the improved intake efficiency contributes to increased power output.
■Maintenance Methods
STEP1 Remove dust and other large debris.
STEP2 Spray air filter cleaner over the entire surface of both sides and clean with a soft brush, etc., if necessary.
STEP3 Rinse dirt and filter cleaner thoroughly from the back of the filter under running water.
[Repeat steps (1) - (3) depending on the degree of soiling.]
STEP4 Clean with lukewarm water in which a neutral detergent has been dissolved.
STEP5 Rinse off the detergent completely and dry thoroughly.
STEP6 Spray air filter oil on both sides.
STEP7 Leave it for 5 - 10 minutes to make sure that the oil is evenly absorbed, and then install it on the bike.
High Intake Efficiency Air FilterWashable high intake efficiency air filter.
Unlike the OEM dry filter, it can be used repeatedly by caring for it with special air filter cleaner and filter oil.
They withstand dusty off-road driving and are cost-effective because they can be reused instead of discarded.
Compared to the OEM, the new model improves not only the intake efficiency but also the adsorption effect of sand and dust.
Increased intake efficiency also contributes to increased horsepower.
The filter is strong enough to withstand repeated washing and air blowing, and is resistant to high temperatures.
[Recommended cleaners and oils]
・MAXIMA Air Filter Cleaner
・MAXIMA FAB1 (air filter oil)
High quality non-woven fabrics are used.
Steel mesh coated with galvanized and epoxy resin sandwiches the non-woven fabric, making it resistant to deformation even with intense air intake and fiber expansion.
In addition, it is heat resistant and can withstand temperatures as high as 140 degrees Celsius.
[Horsepower test results (bike used: SEROW 250)]
Compared to the stock unit, the improved intake efficiency contributes to increased power output.
■Maintenance Methods
STEP1 Remove dust and other large debris.
STEP2 Spray air filter cleaner over the entire surface of both sides and clean with a soft brush, etc., if necessary.
STEP3 Rinse dirt and filter cleaner thoroughly from the back of the filter under running water.
[Repeat steps (1) - (3) depending on the degree of soiling.]
STEP4 Clean with lukewarm water in which a neutral detergent has been dissolved.
STEP5 Rinse off the detergent completely and dry thoroughly.
STEP6 Spray air filter oil on both sides.
STEP7 Leave it for 5 - 10 minutes to make sure that the oil is evenly absorbed, and then install it on the bike.
Caution
*Filters must be installed and removed according to the service manual.*Over-application of oil may prevent the product from performing as intended.
*If the vehicle is driven immediately after installation, oil may be sucked into the engine, causing engine malfunction.Dry it appropriately according to the directions for your air filter oil.
*There may be changes in product specifications due to the manufacturer's reasons.
