Reviews
3 season pants
Daytona's winter fleece pants were worn very well. Now that the days are getting warmer, I was looking for pants for all three seasons and bought them because I liked the casual design and not-so-slim fit. Thin knee pads are included, and although it is unfortunate that the length is particularly long, I am satisfied. -------------------------------------------------- -------- Daytona's winter fleece pants were worn very well. Now that the days are getting warmer, I was looking for three-season pants and bought them because I liked the casual design and not-so-slim fit. Thin knee pads are included, and although it is unfortunate that the length is particularly long, I am satisfied. Powered by Google Translator View detail
I can't wear them if I get any fatter lol.
I think it would have been better if it had been one size larger.
There was not much elasticity around the waistband, so if you have a large belly, it would be better to buy a one size larger size and tighten it with a belt.
I'm 177cm 86kg Waist about 88 and XL was Limit lol.
I'm not trying to lose weight.
View detail
comfort (in shoes, etc.)
The comfort is soft and fits well on the foot.
The hem is a little long.
View detail
Small
Waist circumference is quite small in relation to the value.
32 (90cm) I bought a pair of 85cm Pants, but they are as tight as or slightly tighter than the 85cm Pants I am currently using from another company.
In contrast, from thigh to hem, it is too loose.
I am wondering which MODEL arrived at hand, before or after SizeRenewal.
For some reason, a 32inch 81cm Seal was posted, but I think this size is closer.
I bought this size because I wanted to wear it loosely around the Waist area, but unfortunately, I have to keep it.
View detail
Inseam..!
Adjuster is easy to use, no problems!
Stretchability no problem!
One drawback, I guess it depends on your taste, but the crotch was a little shallow for me….
View detail
It is a well thought out product for Rider.
Height 170cm, Weight 65kg, Inseam 79cm. I usually wear Denim size 29-30 inch, but I bought 32-inches considering Protector and Inner thickness. I wore them without Inner and with Protector and they were a comfortable fit with a little room overall. The design is Orthodox, the quality is good, and I think it is a good product. I wanted to get other colors as well. View detail
Fit and Stretch for easy movement.
I ordered this in a M size but decided to return and exchange it because it was too tight around the belly. It was tight, but it was a good fit and the stretch made it easy to move around in.
I wear a thick undergarment like HeatTEC under my Jeans for winter riding. Jeans are great for both daily riding and touring. So I reordered the L size. I think it's best to try them on before you decide. I really appreciate that Webig has a free return system.
View detail
command to have dog place its second paw in one's hand
This is the second time I have purchased this item, and even though it is the same size as the last time, it is a size larger this time! View detail
When you are in a Casual mood.
Was the one you received as per Image?
Street Image
[How did you feel about the Fit?
StraightSilhouette, so no problem with the same size as your everyday denim pants. Not suitable for those who like slim silhouette.
How was your experience with it?
The casual StraightSilhouette allows you to wear it without worrying about being seen. I wear it when touring in public places such as city streets and sightseeing spots. The fabric is quite stretchy, so it is easy to raise and lower the legs.
[Was there anything that disappointed you?
I thought the cowhide on the Heat Guard would reduce the forward Gap of the body when decelerating, etc., but it didn't have much effect.
What are the specs of the product, such as protector?
Knee ProtectorStandard Equipment, solid protector but no CELevel listed.DFGOEMHip protectorPocket available.Hip protector sold separately.
How did it compare to other products?
Compare:KNOX bu Lleyton.
I like it because it is lightweight, easy to wear and easy to move around in, except for the fact that the Protector is a pain to put in and out. I also like the fact that it is a standard straight silhouette, as slim silhouettes do not suit my body shape.
The deciding factor in the purchase
I had liked the brand since I used to ride a CRF250L, and the price was quite low.
[Notes]
Because the pocket for the knee protector is on the lining, the protector cannot be inserted or removed without turning it inside out.
View detail
Good sense of Size
Was the one you received as per Image?
I am glad that the hem was made narrower as per Image.
[How did you feel about the Fit?
The size was just right.
[Was there anything that disappointed you?
I would have liked to see a little more Stretchability.
What are the specs of the product, such as protector?
I'm glad I put the Protector in from the inside so the Zipper doesn't stick to the outside.
View detail
difficult to order
The products are normal. The only thing is that the search for products is confusing, I thought I ordered a Stone wash, but it turns out to be a Stone wash.
Black came. It's my fault that I misunderstood by the picture.
View detail
For cold weather
The MeshDP-33A for summer was just right in size, so I thought I might wear it inside for warmth. Waist area is not too large, but it has a good amount of room (84cm). (The Waist area is not too tight, but a little more roomy than the DP-33A (84cm) and the Large seems to be sturdy even if I put it on. It is not too slim but not too thick either. I went out for touring at a temperature of about 6 degrees Celsius, but I didn't feel cold because the windproof and thermal protection were both perfect. View detail
Absolute peace of mind
I am 168cm, 62kg and I chose 32-inchesAsianFitSlim, the Waist is a little roomy and the hem length is perfect. I am a little worried about the tank getting scratched because of the convexity of the Rivet. I wish the design of the waist Labeletc. was a little more elaborate, since it is not cheap. View detail
Wilde Trucker style
The inside is made of mesh, and leather material is used on the outer inner thighs and at one point on the front.
Built-in Knee Pad in the knee area
View detail
Safety in case of emergency.
I bought it hoping for the strength of the fabric. 。
I am 172cm, 66kg and I chose 32-inches and the waist is just right.
Pads can also be worn without much discomfort.
Compared to the 56Design RidingJeans that I own,
Waist is a bit larger than 56Design's M Size and a bit smaller than L Size.
The weight is also heavier than the 56Design ones, but when you put them on, the weight doesn't bother you so much.
The fabric also felt softer than I expected.
StraightMODEL, the width of the armpits is wide, so it will feel loose for those with narrow feet.
If it gets cold and you wear InnerTights or something, it's just the right width.
View detail
Jeans for Motorcycle
I am W31 and 76 and LEVIS Jeans fits me perfectly, so I was torn between AsianFit Slim and AsianFit Slim Plus, but I decided to go with AsianFit Slim (Stone wash) W32 because Plus has a 5cm longer hem.
The fabric is a little thicker than LEVIS and the hem width is the same, but it is not stiff and has a little stretch, so there was no discomfort at all. The position of the knee and hip pad was also good. I was worried about the color fading, so I washed it once. As a result, the color faded a lot, so you should be careful until you get used to it.
Boots because the hem is pulled slightly upward when straddling the Motorcycle. (12cm high) The number of the gills will go up to the gills of the
If you have SlimPlus, you would be covered, but it would be a matter of preference, as long as the knee pad is in the right position.
I will use it with long boots, so I am happy with it.
View detail
Fits well.
Great fit and finish, L size fits me quite nicely. I especially like the RS Taichi style knee pad velcro system to adjust the height of the knee pads as they don't shift around once you set the position. 10/10 will buy again. View detail
It is easy to match with jackets from Riders to Biker jackets.
[How did you feel about the Fit?
With my body type.
L, WaistExactly, Pitch re from thigh to calf
When putting them on and taking them off, they are a bit large, but they look stylish and not too tight, even in the motorcycle riding position, although they are snug.
XL, WaistLarge size, Waist is a stretchy spec. but a little extra when shrunk to its shortest, size with room from thigh to calf, but it's comfortable but looks a little tabby and not parenthesis.
I chose "L" because of this.
How was your experience with it?
I know, but it's hot in the summer, and it's even hotter because I'm PITCHED.
On the other hand, it might be nice and comfortable in winter.
The thighs and calves have leather heat guards, which is good for motorcycles with tight inseams like the MONSTER1200R and GSX1300R HAYABUSA.
The fabric stretches even when bending the legs while riding, so you don't feel tightness as expected.
OthersDesignetc. is good Parenthesis without any problem.
[Was there anything that disappointed you?
I don't have anything Large, but I'd like to see at least a butt pad included as a standard feature.
What are the specs of the product, such as protector?
None except for a gutted Protector in the knee.
There is a pocket on the buttocks to hold a Protector, which is sold separately.
How did it compare to other products?
Other Denim-type products were not good, with many of them being slim G-pants.
These Pants are great in both design and function!
View detail
I think it deserves to be more famous.
The deciding factor in the purchase
I decided that if I was going to buy something, I wanted to buy something with solid defensive performance, so I chose this product, which is CE StandardAA” as it is equipped with not only knee but also hip butt Protector and has the product feature "Jeans (not only Protector is CE compliant).
In addition, many bottoms for Motorcycle have only out-of-problem sizes, such as Waist from 80cm and inseam in the 70cm range, but the deciding factor was that the SSize for this product has Waist from 76cm and inseam 81cm available.
Also, the fact that Urethane is not used for Material is also a high point.
Was the one you received as per Image?
Although it says "Stone wash", it is actually a one-wash color (normal dark blue).
This is the color I like, but if you expect the Damage feeling typical of Stone wash or the light blue of the product page, you will be disappointed.
[How did you feel about the Fit?
Waist is listed as 76cm-82cm, but I think it is Oversized if you expect a Waist of 76cm because it is not a type that can be stretched to accommodate.
Probably Waist 80cm is the appropriate Size.
On the other hand, the Hip area tends to be Exactly around the Hip with the Butt Protector attached.
The buttocks are tighter and it is harder to put things in and out of the pocket (although it is not cool to put things in Jeans' pocket in the first place and have the silhouette collapse).
I think the deeper crotch is to prevent the Rivet from hitting the body when riding a motorcycle and the front pocket from hitting the body, but personally I think it is too deep.
How was your experience with it?
The knee Protector is flexible and does not interfere with bending the knee, which is great.
There is no Protector position adjustment function, but this is apparently because it would not pass the ECE Standard if there is an adjustment function due to the possibility of gapping when falling down (that's why they offer products with different lengths instead of hemming).
For this reason, the bag that holds the Protector is not made of mesh, but a solid piece of fabric.
It looks hot in summer, but when I put them on, I didn't notice much difference (I'm not sensitive to heat in the lower half of my body, but maybe I'm just insensitive?)
I think it dries easier than regular Jeans because it is made up of half synthetic fibers. (It does not dry quickly like a quick-drying Material, but only compared to 100% cotton Jeans. Basically, it is hard to dry)
[Was there anything that disappointed you?
The bag for the knee protector is sewn together with the seam of the Jeans, which makes the seam less noticeable, but this makes the seam thicker and less carefully sewn, which makes it stiff.
The thickened stitches can then become protruding as the knee bends, and when this happens, the protrusion is held down by the knee during the knee grip, which is painful.
I think it is also due to the fact that I have a surplus of fabric at the lower end of my Size range, but there is room for improvement here.
How did it compare to other products?
Shirring and Protector parts are conspicuous, and there is none of the tackiness that is typical of Jeans for motorcycles.
【Included Parts:presence or absence】.
A thick Instruction Manual in multiple languages was included with each Jeans and Protector, and even a storage bag for the Protector.
I wonder if this kind of place is unique to European Manufacturers.
[Opinions and requests to Manufacturer
I would like to have another One SizeSmaller size, and the seams in the knee area could be improved.
View detail
Good jeans with included knee pads
The product is good quality. It is made with traditional jeans fabric, it is not kevlar or anything special. It is very comfortable. Be careful to look at the size chart included in the product pictures and use a tape measure (dont pay attention to the recommended universal size comparison). The pants arrived are just 1 or 2 cm bigger than what it was supossed to be. I am glad I did not buy the next bigger size. In my case the only problem about this product is that the knee pads sits lower than my knees. I will have to to something about this if I want to use the pads. The pads are good quality for this price point. View detail