Reviews
![[Honda x RS TAICHI] Tech Cell Chest Fitting Belt for Protector](https://img.webike-cdn.net/catalogue/images/42129/0SYTP-X9A_01FS_K_TS.jpg)
Just right for wearing Chest Protector
Chest Protector is used for Single Body wear.
Protector can be worn with everyday clothes, thus enhancing safety.
I feel it is good because it allows me to change the wearability according to my body type.
However, when wearing it, the string? The strings can get kinked when worn.
They may find it difficult to wear.
View detail
Relief!
I purchased this product to attach to a Jacket that either did not come with a Chest Protector or had performance concerns.
It's a Separate type, so the middle is open, but it's not a problem.
Quantity:Pair (for Left and Right) The chest area of the "Mere Old Man" is covered with a gusset, which gives him a sense of security.
The hardness is soft enough to bend in ammmm bend when it is warm, but hardens when it is cold.
It is like a Ca Lamele or a Hi-Chew.
I use it curved to fit the Line of my body.
Weighing 102 g on one side, it feels light in the hand.
The thickness is about 1.5 cm, but the fabric of the Bag for installation is thicker.
When placed in a bag, it is thick and gives the impression of being large.
The pocket for the Chest Protector is on the Small Jacket.
It is attached with this Bag.
It can be used for both Velcro and Snap Button Type.
I thought it would be useful for a wide range of Jackets.
I just installed it on my summer Mesh jacket.
The shape of the Protector was fully visible from the front, and it was ugly.
Too bad ….
Jacket in winter was no problem.
There are rumors that the Bag for this installation has a Snap button that is fragile.
I wish Bag was sold separately.
View detail
You look weak
"The delivery arrived well and the product was received well.
It looks weaker than I thought.
Just a mushy sponge? It's the same material. I was expecting something thicker, but it's a little disappointing.
I did it in a summer suit, but I don't think it will protect my body ------------------------------------ ---------------------- I arrived well and received the goods well. It looks weaker than I thought. Just a shakey sponge? It's the same material, and I was looking forward to it more. I was in a summer suit, but I don't think my body will be protected. Powered by Google Translator"
View detail
![NUCLEON FLEX PRO Ci [New Cleon FLEX PRO Ci] Protector](https://img.webike-cdn.net/catalogue/images/86755/6702121-114-fr_nucleon-flex-pro-ci-protector-right_TS.jpg)
Sense of security Part 2
I purchased this for my favorite T-JAWSv3 with 3SeasonJacket.
Jacket is Euro size M.
The Protector of this product is L.
The Size was Exactly as confirmed by Okada Shoji's Site.
It is softer than I expected and Bigli.
However, in the compression direction, it is ka-chica-chi, which is a bit strange.
It will protect you well.
Since T-JAWSv3Jacket has Dry starFilm, which is waterproof and moisture permeable, I could not visually see the pocket for the protector, so I had to attach it only by feeling with my hands, which was quite a challenge.
Together with the Back Protector we purchased last time, we are now fully equipped and feel more secure, but the best thing is that these pieces of equipment are not active.
It has become a reliable insurance policy.
View detail
If you have it, it's safe.
I use three different types of eif jackets depending on the season.
The mesh jacket I purchased this year had this same chest protector as Standard Equipment.
However, the other two Jackets I purchased years ago were sold separately.
I hadn't paid attention to it before, but I still feel a different sense of security when I have it.
It is easy to remove and only needs to be attached to the Jacket to be worn, but I bought it because having another one would be easier.
I thought it might be a little obtrusive, but once I put it on, I didn't mind.
View detail
For lightness!
[How is it used? Purchased as Chest Protector for Thailand Chi AirTruckParka RSJ333.
Was the one you received as per Image? As per Image.
How was your experience with it? No problem, no problem.
[Points to note] None in particular
How did it compare to other products? I was looking for something lighter than the Thailand Chi SeparateChest Protector TRV079, so it met my objectives.
Other items that would be helpful
It can be attached to the Snap button on the Point of Installation or the hang/Thailand Jacket.
Items to be purchased together/nothing in particular if you choose the bag included.
Opinions and requests to Manufacturer/I wanted the ZipperBody? (moving part) to be hidden when closed.
View detail
Used for Mesh jacketYB2101
I bought a Mesh jacketYB2101, but it didn't have a pad in the chest area only, so after much hesitation with the Hard Type, I bought this one and installed it.
About installation
There is a pocket that can hold a pad, but it seems to be designed to be "just the right size," so it was a little difficult to fit it neatly, but as a result, it fits in Beauty.
Try it on
The material is a little soft because it is urethane, but it makes a Large difference if it is not there. The feeling of security has been increased in the Large width. I am satisfied that I can use the jacket without any discomfort, and it is not difficult to put it on.
View detail
It could be attached to any Jacket.
Breathability is not so desirable, but it is definitely lightweight. It is also good that it can be attached to both summer and winter jackets using Magic tape, so it is economical to use one jacket at a time.
You can't know how protective it is in the event of an emergency until you experience it.
View detail
Used for Jams Gold BECK-1 Riding jacketM Size
This is a RoughAndRoad Air throughPad, which means that it is not a product that matches JamsGold's Jacket, so you are on your own regarding its use.
Each Size of Pad is
Back Pad, approx. 43 cm (length), 33 cm (width)
Chest Pad, approx. 34.5 cm (length), 16.5 cm (width)
Shoulder pad, approx. 21.5 cm (length), 17 cm (width)
Elbow pad, approx. 27 cm (length), 16 cm (width)
The shoulder and elbow pads are curved and the length is aligned with the curved surface. The shoulder and elbow pads are curved, and the length is adapted to the curved surface.
The material is urethane, so it can be cut.
The Jams Gold BECK-1 Riding jacketM Size allows me to use the shoulder and elbow pads as they are. The back and chest pad had to be cut to fit.
View detail
For chest protection.
Since I have Power age Riding jackets for winter, summer, spring and fall, I purchased PA-539, which can be used for all of them.
It seems a bit expensive for the quality.
View detail
Focus on thinness
I was looking for something thin and soft, and after comparing with other manufacturers, I came to this one.
Although it does not say that it is ce acquired, it is said that it hardens when impacted, so we decided that its performance is sufficient.
This is a great product.
All Chest Pads are thick, and if you want a thin one, it is worth considering.
View detail
For everyday use
I'm very happy with the fit of the Image. View detail
Easy to install, large and secure.
I bought this product to attach to my Thailand summer jacket, the Viento Air Jacket. The ProtectorBody can be removed from the Cover, so it is good that you can wash the Cover Only that is dirty with sweat. It is better not to encounter Situation to be able to confirm the extent of the effect, but I think that it is better to have less Damage to the body even a little in case of emergency, so I think that it will bring a good effect mentally to have a sense of security plus when I am riding. Considering that I buy a new one every few years, I appreciate this price. View detail
trustworthy
The Protector that came in the Mesh jacket was quite thin, so I decided to go Hard for safety.
It's nice because it's hard enough and has a large enough area to be protected.
View detail
ProtectorSingle Body with a bag is a little expensive.
I think.
At least if the entire front surface is Velcro and the position can be adjusted anywhere, but if you can do seamstress, it is better to buy ProtectorSingle Body and process it appropriately.
Let's try to put EmblemBase on the vacant Space for now.
The Protector itself is a little thicker than the CE1's and a little thinner than the CE2's.
According to DAYTONA, the load capacity is 50% higher than the CELevel 1 standard.
I hope you never get a chance to try it.
View detail
![NUCLEON FLEX PRO Ci [New Cleon FLEX PRO Ci] Protector](https://global.webike-cdn.net/photo/impression/45/45709cfcf0c15c4bde49899b592137c6L.jpg)
Reliable (?) JMCA recommended Chest Protector
Mesh jacket for commuting (Made by Alpinestars) It was used to enhance the protective power of
I've been using Mesh jacket for my commute for a long time, but recently I bought it because I suddenly started noticing that I wasn't using Protector at all.
I tried to install the L Size to the M Size jacket, but the size was quite limited.
It is recommended by JMCA, so you can feel secure about protection performance.
The Protector is designed to fit inside the jacket, so it won't flap around when you take it off or put it on.
(The Protector made by TAICHI that I use separately is a type that fastens with a Button, so it flaps around. https://imp.webike.net/article/321102/)
Compared to the Urethane that is installed from the beginning, there is a weight, but once you put it on, it is Level that does not bother you.
The downside is that it has a mysterious smell, probably due to the material used in the product... ・ I'm sure it will wear off with use, but it might bother you when you first start using it.
View detail
![NUCLEON KR-C [New Clioon KR-C].](https://global.webike-cdn.net/photo/impression/29/29ee25983d67e12506f8d6d735af4bacL.jpg)
Protector is a must.
Cannot be used with Single Item.
This product must be used in conjunction with Spine Protector.
The Fastener on the front makes it easy to remove and install, but the center is unprotected.
As I wrote in the Spine Protector, the joint is too loose, so it's not good that it sometimes comes off.
View detail
It was in a used Jacket that I bought at a supply store.
It was installed on a used ElfWaterproof jacket that I bought at a large Motorcycle supply store. It's a solid hard one with a good fit and a good impression. View detail
It's good to use with other Protector.
The company sells Armor Hoodie and Quantity:Buy the set
In conclusion, this Single Body does not provide enough protection.
I tried elbowing a hard place and hitting my chest to test it out, but I felt a shock that I couldn't absorb.
So I used it in conjunction with the Protector, which I've had for a while and which is protective but painful to the skin, and it turned out to be a pretty good fit and shock absorber.
detail point
The thickness is about 5mm, so I think it can reduce the scratches even if it is a single body.
The overall protective range is wide. Especially the chest part is longer than expected, and it covers the abdomen. If you want to use it for something other than a rough-and-amp;road jacket, you probably need to modify it.
The material is soft and comfortable to wear. It seems to be easy to process.
View detail
Harder than Soft
I haven't tested the protection. (You don't want to try it, do you?) I bought this for my flight jacket. I bought this for the Flight jacket of the same manufacturer. The standard pad is too soft and unreliable. If you try to use other manufacturer's pad without buying this product, you can't use it because the length is too short. Therefore, this product is longer in length. It was a good decision to buy this HardPad. It is hard and easy to put on and take off. View detail