Reviews
If you're serious about Race.
Product Name
ATLAS Atlas AtlasBrace Vision
Item Number
C2664
Vehicles
Male, 75kg, wearing L Size clothes
Number of man-hours
5 minutes
Required Tools
Scissors would be perfect.
Why did you choose this product?
I chose this one because I heard that you can hurt your neck with Race. I also heard that the stronger ones are difficult to use on forest roads and Enduro, so I chose this one.
Was the one you received as per Image?
It was just like the Image. It was more luxurious than I expected.
Was the installation difficult?
It is not particularly difficult, but since the Instruction Manual is in English version, I think it is better to refer to the Net description.
How was your experience with it?
I think it is light and easy to use. Also, the coloring is simple and good. I am afraid of hurting my neck later, so I would recommend it to anyone because it is a Guard in case something happens to my neck.
[Included Parts:were they on?
Instruction Manual, etc. etc.
[Was there anything that disappointed you?
I would like to see more Coloring.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
To Upgrade Protector
Since the standard Protector was not enough for my needs, I upgraded only the back.
Compared to the standard, Protector lifts, but it does not bother me as much.
The thickness is about 6mm, which seems to be almost the same as the standard Protector, but the standard is Mesh, so naturally, this product is stronger.
I am also considering a Chest Protector, but I think it would be too tight to wear with this one, so I am putting it on hold.
View detail
Required to protect the knee
Product Name
PODMX Pea Audie Em X POD K4 2.0 Knee brace Quantity:Pair (for Left and Right)
Item Number
K4024-058-XL/2X
Vehicles
Male, 170 cm in height and 75 kg in weight
Number of man-hours
5 minutes
Required Tools
A pair of scissors would be perfect.
Why did you choose this product?
I had been wearing a knee guard, but I was told by other OffRoad riders that it would not protect my ligaments, so I decided to purchase one. The price is high, but I think it is good because it has a good fit and options.
Was the one you received as per Image?
It was just like the Image. I felt it was typical for Off-Road.
Was the installation difficult?
Velcro should be careful because there is an order to follow.
How was your experience with it?
Surprisingly good; it has a Fit feel and doesn't seem to bother me.
[Included Parts:were they on?
There is a pad that can be retrofitted to enhance the Fit feeling in the knee. If you attach it to your knee, you can use it without any problem.
[Was there anything that disappointed you?
It is pricey, but I think it can't be helped.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Low price but sufficient protection
I always enjoy touring in the woods, but since many people around me have knee injuries and I have had knee injuries myself, I decided to buy a knee brace before I get a large injury.
This product is very inexpensive and much cheaper than other products. They are less than half the price of the more expensive ones.
When I actually put it on, I felt like I was wearing a large layer at first, but when I started running, I forgot I was wearing a Level.
I thought this would be a very good buy if it would reduce the chance of knee ligaments and injuries to a LARGE width.
I have not used other companies' products, but I believe this is sufficient.
You can choose the size that fits your own measurements according to the size chart.
There are also several collars for adjusting the range of motion of the knee.
The order in which the Belt is stopped is also important, and we recommend looking at the Instruction Manual once.
I felt that these knee braces should be worn not only by advanced users, but also by beginners who often fall down.
Since off-roaders are often unexpectedly on their feet, it is recommended that they wear them as much as possible to protect their knees, which are easily injured.
View detail
Genuine Furygan D3O Ghost Level 2 Shoulder/Lumber (hip) protectors
I have recently purchased a new set of motorcycle jeans with level 2 protection on the hips and knees. The problem is, they are the standard bulky foam version. Although they are level 2 which is the best you can get, they are massive once situated within the jeans themselves. Time for an upgrade. I looked around a lot for smaller protectors but with less bulk and came across the Furygan D3O Ghost. Wow, these were definitely the ones for me. Having checked around on Webike website, they do actually stock these and not only for the Furygan brand either but these will be perfect for my needs. The price of them was really good value and slightly cheaper than I could source locally. With the other part of this upgrade, ie, the knee/elbow protectors, I had them all shipped together. This saved on the cost and my chosen courier is EMS as always. They just get your order to you fast. They all arrived safely in 5 days from being shipped. They came in a nice Furygan box and were well packaged. The shoulder/lumber (hip) protectors do obviously have a dual purpose depending if you want to use them in jeans or a jacket. The protectors themselves are really strange when you first look at them, they have lots of small segments which are attached to a material backing. The flex of these are amazing. The only way I can describe them is like a sort of honeycomb that when you move them, they almost link upand this is where the prtection is. This is of course by design. They are extremely lightweight and once fitted, you would barely know they are there. Wow, these are the best upgrade to a pair of jeans/leathers that I believe you can get. Cannot wait to try these out on long rides. Thanks Webike for stocking so much to choose from. View detail
Genuine Furygan D3O Ghost Level 2 Knee/Elbow protectors
Along with wanting to change the hip protectors in these new jeans, I wanted the knee protectors too. The standard ones which come in the jeans I have bought are level 2 so pretty much the best you can get protection rating wise anyway. The problem is, with the being the standard foam style, they are really thick and a very rigid shape which does not always work so good on longer rides. So, having found these on Webike website along with the hip protectors too, I added them to the order. All shipped using my preferred courier which is EMS. My order arrived in 5 days from being shipped which works well for my schedule. The protectors were well packaged by Webike and they came in a Furygan box too. As with the hip protectors, these are the same style which is almost a honeycaomb design. You have to get these to believe just how thin they are, hence the title Ghost. They have mutliple segments and all attached to a material backing. The backing is a very strong fabric and keeps it's shape. The segments are some kind of poly rubber mix but are pretty flexible and very tough. They depth of each segment gets a a little thinner as you go from the centre of the protector to the egde. Of course this is a comfort design. Still holding on to the level 2 rating is excellent. My old knee protectors are big and uncomfortable where as these you almost forget you have them in. If you are tired of having massive and bulky protectors in either your jeans/leathers of jacket, I would seriouisly check D3O out. If only I had known about these years ago, I would have had a lot more happy/comfortable miles. Thanks Webike, great work. View detail
It is worth buying even if it is expensive.
Was the one you received as per Image?
It is exactly as shown in the image. If I may say so, I feel it is slimmer than I expected.
[How did you feel about the Fit?
Just right. The large knees are a little on the large side, but it works fine. The four Velcro fastening straps are a bit thicker on my thighs and calves than most people, so I had to adjust them a bit. However, there is no problem because it can be adjusted within a fairly comfortable range.
How was your experience with it?
It is lightweight and does not feel like it is restricting my movement, which is very good. There is no feeling of being caught or restricted in bending and stretching, but I have the impression that it protects me well. The knee cups are held in place with a tie wrap, which leaves a little space. I think this is probably to prevent interference during normal bending and stretching.
First, the Hinge must be adjusted so that the knee is not fully extended and the knee is not fully bent. These things are meaningless unless they are adjusted properly.
[Was there anything that disappointed you?
I have to peel off the Velcro when removing/removing and washing, but it doesn't seem very sturdy.
View detail
Items to purchase first after buying an off-road motorcycle
I bought it as soon as I did my first off-road run and bruised it after running no-guard. Since then, I have been using it for about 2 years and it has completely handled bruising type impacts. It is a must-have item for off-road motorcyclists when touring or course riding on forest roads. However, it does not have the same protection as a knee brace, so depending on how you fall, you may damage your ligaments. I actually injured my ligament, so if you want to be safer, I would recommend you to wear a knee brace. View detail
Combination of fit and protection
Quantity for Shoulder and for Elbow:Purchased as a set. I have used various protectors such as Included Parts of Wear:, Other Brand Product, Hard Type, Soft Type, and those that harden instantly upon impact, and this is one of the ones I like the most. The silhouette is not too large, which is another advantage. I am currently wearing it in my Thailandichi winter wear, but I think it would be less noticeable in a three season or mesh wear. I would love to see a version for the back as well. View detail
Really good braces
I've had an ACL surgery a few years ago.They give me the comfort and confidence I need to ride 100%.I needed something supportive that would do well with post injury knees. Via their reputation I went with mobius.Pros: Very comfortable, very easy good protection, very firm support Lightweight slim design fits in boots well Lots of room in pants.super durable material and very adjustable.Cons: Sizing can be difficult. If you are on the line between sizes, go with smallsize.Slight pinching inside of the knee area when standing (Had to go with smaller size because I was right on the line) All and all these things feel just as supportive Defiantly would buy again but don't think I ever will unless I grow. :) View detail
KUSHITANI Summer Jacket2023 MODEL Size XL Spinal Protector
KUSHITANI Summer Jacket2023 MODEL Size XL
It was a perfect fit for Spinal Protector.
I tried many companies, including Thailand, but Alpinestars was just the right fit.
View detail
one's feeling when wearing something
It is much stiffer than the Songe. It is hard, but it does not feel uncomfortable because it fits on the back. It also seems to have good breathability, so it will not get stuffy. View detail
Thin and unobtrusive.
It is thin, flat, and unobtrusive at a glance, which is good.
I like it so much I want to put it on my other Pants.
The protective properties are unknown, as it has not been rubbed.
View detail
Easy defensive power up
Product Features
Thin, CE1 with SAS-TEC elbow, shoulder, chest and back protectors, good breathability, cut resistant fabric, Mesh fabric
[Suitable person
People who want to ride with Inner and T-Shirt in summer, people who want to ride with Outer other than for Motorcycle in winter, people who ride with Wear without Protector, people who want to use Protector around.
[Effect]
The effectiveness of both Cut Resistant and Protector is unknown because there is no history of falls.
Size Sensation
I am 170cm, 65kg and M size JUST. If you are an inner wear that you never take off, you should go one size down. If you want to wear it on top of your regular innerwear when riding around town and take it off when you get off the bike, I think you should use your regular size.
The protector may be a little bulky after wearing the outer garment, so if your outer garment is a tight leather jacket, it may be too tight. If not, I think the Wear size is fine as it is.
[Not yet.
The lower part of Fastener belongs to Gold and there is no Cover.
Longer length. The back does not stick out, but when leaning forward, the fastener hits the tank, so it is necessary to put in pants.
View detail
Excellent fit and security
It is ideal for casually wearing the Pad on the inner for safety when riding a motorcycle.
Chest, back, knees, and shoulders can be protected.
It seems that it is not possible to use a pad made by another company, as is the case with other manufacturer's products. However, since the pad is made to fit the shape of the pad, the pad does not gap, and the just-fit feeling is outstanding.
Note that OEMPad has a Size expansion.
I think the price is a little high, but the Fit and protected feeling is excellent.
View detail
Considerable comfort has been achieved since the last product Chest Protector
[How is it used?
The company's past products SAS-TEC Chest Protector CP-2 Body Only Item No.:94856 This is a Replace from
Was the one you received as per Image?
It was softer than I had imagined and flexible enough that even if I held it horizontally anywhere, it would not be level.
The Image is a shape-like SAS-TEC resin on a resistant fabric.
How was your experience with it?
The company's past products were thicker and a little stiffer, so when I put them in my Jacket and stretched my chest, I felt like a muscle breast plate ghost, and it was uncomfortable to hit my chest again. I am very happy with it.
And since they are thin, I am very happy that I don't have a muscle chest plate ghost.
[Points to note]
Although it is still a little uneasy at heart compared to the complete HardProtector, it is very comfortable considering the previous company's SAS-TEC as a standard. I am glad I bought it.
How did it compare to other products?
I don't know because I don't use other companies' products.
[Others]
I feel that the softness and fit are so comfortable that I would like to replace the SAS-TEC for Knee with the SAS-TEC for Shoulder and Elbow.
View detail
Measures to improve posture when boarding
I have always had bad posture, so when I ride the CUB, my back gradually becomes rounded, so I bought it in the hope that I could improve it as much as possible.
When I wear Belt, I stand taller than when I don't wear it,
Effective in improving posture and reducing fatigue.
View detail
I'm a soft shell guy.
I have previously purchased a Jacket with Hood with a hard pad in RSThailand.
However, I personally do not like the firmness of the pad and was thinking of replacing it with something softer like a soft shell. The reason I don't like it is that it makes me tense up when I am not riding my motorcycle.
This product is a product of RoughAndRoad, but the Pad shape is similar, so they were compatible.
Of course, the safety will be less than the original performance, so I believe that it is the responsibility of the individual to replace them.
View detail
Leatt brace 22MODEL DUAL AXIS Knee Shin guard
It is very secure and guards the knee and shin area well. Installation was easy and the fit was good. I think the balance between price and function is good. View detail
fairly light
It is a neck brace consisting of two parts:the BraceBody and the Plate on the back.
Adhesion to the body is a standard configuration with Belt attached to the front and back.
The back plate can be adjusted in two steps with a width of about 1 cm by means of pins.
Compared to the upper grade products, detailed adjustment functions are omitted, but the fit is perfect, and as stated in the Title, it is one of the lightest series developed by the company, and can be used comfortably enough without getting tired or shaken by the weight even after long hours of use.
Quantity:Pair (for Left and Right) The connected parts of the "Plastic" are also covered by Plastic in the form of covering the frame of the Gold genus, so there is no softness like PlasticSingle Item.
Another good point is that there is little risk of losing functionality due to impact, such as in the event of a fall.
One point I felt was that when detaching and attaching, the quantity:Pair (for Left and Right) The Button that you press to split the file into two parts should be difficult to press.
In addition to the size shape of the Button, the Spring is moderately heavy to prevent it from being pushed unexpectedly, so I felt that it was more difficult to remove the Button from the bottom than the Type used in the past.
(I guess this is what you get used to …)
View detail