Reviews
Cool and functional, but
It is lightweight, easy to use, well designed, and the price is reasonable. Normally, the bag is a Fixed Type with Magic tape, but there is no Magic tape in all five places, and I felt that it was a bit poorly made! View detail
Thin and nice
The thinness of the fabric is just right for a summer parka. View detail
easy to wear
The pockets are buttoned and there is a gap, so the contents may come out. View detail
Good for loose Touring.
In the chilly days of late fall and early spring, it is a good choice because it is moderately thick and does not transmit cold easily.
It is made of Cotton and has a loose collar and sleeves, so I guess it is strictly for winter use.
View detail
It can be used for everyday wear.
I wore it and ran early in the morning in early April.
I wore a long T-shirt underneath, but it was 8 degrees Celsius, so it was cold.
It is thin and allows wind to pass through moderately.
I like the design.
good point
It is comfortable to use in everyday wear.
It is very lightweight even when fitted with Protector.
The lining is Mesh so it won't get stuffy and is easy to put on and take off.
The simple design will suit a variety of car models.
What's on my mind
The fabric is thin, so when driving over 100km/h, the arm section flops around and makes my arms itchy. I'm a skinny guy, so people with thick arms won't mind.
Fastener on the sleeve is hard to close (squishy and hard to close)
The outer fabric is rough and a bit cheap.
The Protector that comes with it is squishy and not very reliable. (It is light, so it is used as it is.)
View detail
The Fastener is made ….
This Jumper is made like two pieces in one.
The Protector is placed in each part of the outer surface, and it is moderately made.
I thought the Fastener was so reluctant to move that I thought it was broken.
If you wear the inner jumper and the outer jumper together, it will be too fuzzy and you will not be able to move.
It may be necessary to consider the use of the product.
View detail
having thin arms
The arms are thin when matched to Waist and Bust.
Thick fleece or down will be too tight.
In spring and fall, InnerDown only, with temperature control. Midwinter is impossible.
View detail
Although excellent, the expected value was below Large.
Ultimate Versus Extreme Cold Spec." I bought it with high expectations because it claimed to be "the best", but I felt disappointed because I had set my expectations too high. Also, I was disappointed because my expectations were too high. I am not sure if this is a good idea or not.
If you look at it as an ordinary winter jacket, it is excellent in terms of both performance and price.
However, since the evaluation is based on the product name and the product introduction, the review is a bit harsh.
-4°C to 11°C (This is a Motorcycle Thermometer, so there is a margin of error.) About 16 hours I write what I felt while touring in cloudy weather.
〜I thought it was a good place to start.
0A hard-edged design with few odd color additions.
0Outer neck warmer around the neck blocks cold air more effectively than expected.
The SIDE of the hem opens wide when the fastener is released, so that the outer layer that is leaned toward the rider's stomach when riding does not bulge out, resulting in a natural riding posture.
0Adjuster at the sides of the abdomen and a long chest soft pad prevent the garment from feeling too bulky.
The pocket on the chest is thick and easy to take out. The waist pocket is also large enough to hold a hat or wallet without difficulty.
〜I was not happy with the way it was handled.
0Handling of Hoods that are out of control due to high velocity ranges and strong winds.
→ Hood gets a little out of control when cruising at high speeds or in high winds. That is normal, but I am concerned about the fur shedding. It seems to be rolled up and stored, but when stored, the fur sticks out and is dirty, so I would like to keep it rolled up as much as possible except when it rains. Also, it is quite difficult to store it with helmets and gloves. I don't want to take a break to put away the hood before entering a highway or a single-digit national highway. I thought it would be better if there was a button on the back to hold it in place when deployed, so it wouldn't get out of control.
If you say, "Why don't you just remove the hood," you are right, but it looks cooler with it on.
If you claim to be the ultimate, Inner should be Standard Equipment with a Caph.
The→outer fabric is firm and resilient, and the lining is not particularly brushed, so when I squeeze the sleeves, my wrists feel stiff and cold. I think it's fine because you can squeeze them thin, but if you use inner fabric with Caph, which is already available in the market, the feeling of wearing will be improved and it will also block cold air from the wrists, so why is it not adopted as standard?
seriously Focused on the ultimate in thermal performance." I wonder? … I thought.
I wanted to have a twist on cold protection for the zOuter as well.
I like that the→Outer is only Waterproof and windproof, leaving the heat retention function to the Inner, but then the Outer doesn't have to be this one, does it? I thought, "If that's the case, why not use this for the Outer? If you wear it normally, you will feel the cold air as the Material gets cold even if you are not running in sub-zero temperatures.
If you assume that the user will supplement the cold protection with individual layers of clothing and electric heating, you will honestly feel no difference from other jackets.
As long as the product name calls itself Polar, I thought it would be nice if the Outer had some appropriate treatment.
The outer jacket consists only of waterproof windproof fabric and a thin down jacket (the arms do not seem to be treated with titanium), but I wondered if it could be called a polar spec jacket. I thought so.
This is a very selfish review, but Rough&Road is my favorite brand, so I dared to write what I thought. I will use this Jacket with ingenuity for a long time.
View detail
Size XLThe size of the chest and hem circumference is Small.
I ordered Size XL this time because my body shape is thicker and I thought it would be better to have more room in the length and sleeves even if they are large.
The design and quality of this product was very good, but when I actually put it on, it felt a little tight.
In CatalogueSize, it was the same chest and hem circumference as the other Jackets I use.
The item I received was a Size XL in length and sleeve length, but when I actually measured the chest and hem circumference, they were only the LLSize measurements in the Catalogue.
I wanted to get in shape before the next season because it is a good product and I can wear it if I don't wear layers. LOL!
View detail
Really Winter?
Surprisingly, cold air comes in. The feeling around the cuffs is also loungy. View detail
Post-purchase use.
I recently did an imprementation of it right after I purchased it, and I'd like to reiterate how I've used it since then.
First, I tried it on with Protector in it. There was no discomfort in the fit with Protector in it, and it was Large sturdy even when worn with thin clothing.
However, after wearing it a few times and riding the Motorcycle, the hem faded and it transferred to the Tank and became Black.
Isn't it fatal for a Motorcycle leather product to fade so easily?
Maybe it is an individual difference in products, but in that sense, the one I bought was an outlier.
View detail
The functionality is good, but ….
[How is it used?
Purchased for spring/fall touring
Was the one you received as per Image?
Almost as shown in the Image, but thicker and heavier than expected.
Soft shell is thick, so there is a sense of stiffness.
How was your experience with it?
Height 185, weight 78! 2XL is just right.
The temperature was about 25 degrees Celsius, just right for running with a light long T and Ventilation open.
Even if it gets a little colder, it will be able to cope by adjusting the Inner and Inner Jacket.
[Points to note]
Chest Pad is not included, so we purchased the SAS-TEC (sold separately) at the same time.
Overall well made product, but some sewing defects.
The RightChest pad slot looks like a hole with no stitching rather than fraying.
No problem in use, but it is Minus star.
How did it compare to other products?
I compared it with the product of company K, but decided to go with this one by Design (laugh).
View detail
HONDA's Full Mesh
Full Mesh for comfort.
It is slightly loose and easy to wear.
It is a soft protector, so it is a little unreliable, and there is no protector on the chest and no pocket to put the protector in.
Casual looking, so not so embarrassing in the store.
View detail
It's cool.
I am 5'6" 60 kg and it was just right.
It is a Recommendation because it is airy and cool.
View detail
Exactly
I am 168 cm and 60 kg and it was just right.
It is a Recommendation because it has a good texture and allows the wind to pass through!
View detail
Design is GOOD!
I like the design, so I have no complaints, but the function as a mesh jacket (Mainly coolness and fit of the cuffs and other parts of the body) is not what I'm looking for. I have a less expensive product from another company, but I wear that more often. If you like this Brand, I don't think you will regret buying it. View detail
Revised?
I bought it because I liked the previous MODEL.
I first ordered Red, but it was sold out, so I ordered Cancellation.
In tears, I ordered the same color as the one I have now.
I received it and tried it on.
Yes, the Size feeling is the same.
I don't really like the black part on the flanks, but it's cheap so I'm OK with it!
Unlike other Mesh jackets I ride a motorcycle! I like the fact that there is not much Appeal.
However, Pocket's Zipper doesn't have a Tab or
The lack of rubber shirring on the cuffs and other features make it less convenient to use.
Let's put up with Zipper's Tab at 100 paces.
But, the cuffs are unforgivable. I didn't notice it when I put it on, but well, it's hard to take off!
Didn't you try these on when they were completed?
View detail
Rough material and waterproof finish that does not repel water
I bought it because of its good design and ventilation function. I did not try it on, just the picture, and the size was XL based on the description. I imagine that it was made with a little room to spare because it is compatible with the newly developed and released AirProtector. I think it is Merit because you can put a lot of clothes inside in winter. The fabric material is stiffer than it looks in the picture. I can't help it because I think it is safe because it is made of Material that is resistant to breakage. The back and chest are Protector (sold separately). (Expensive) I thought I would wear it casually and lightly when touring, but it was surprisingly heavy and stiff on my shoulders. It is lighter than Dainese leather jacket, but it is beyond my imagination. The zipper has to be tightened tightly to prevent water from getting in. The material seems to be Waterproof, but the water repellency is almost Zero, so when it rains, water spreads over the surface of the fabric and lightly soaks through the gaps between the zippers. It is true that water does not directly enter through the fabric, but the surface of the fabric gets wet in a nasty way, so it is better to use a water-repellent spray. I think it is better to use water-repellent spray. As I mentioned above, it is an exact size in winter if you wear a down or parka inside. If it is hot, you can make the Intake from the arms and the front zipper part Air Intake, and if you release the rear air exit, it will be cooler. I felt that the temperature is 30 degrees Celsius even if I wear a thin inner layer and use the ventilation function.
I wrote a lot of things, but if you like Design, it's good that you don't CUB everywhere you go because not many other people wear it. right, left, or I'm a Kushini? It won't be like that.
View detail
I bought it for summer.
Impressions after driving in sunny weather with an outside temperature of 26°C (79°F).
Anyway, it was hot and felt heavy.
Next time I will remove the chest-back Protector and test the ventilation and weight.
View detail
Komine's Hard protector goes in.
The original protector was a flimsy soft protector that was only included for the sake of ventilation.
The wind flow was excellent, it was cool, and it was squishy, so it was light and comfortable, without being bulky.
So I was looking for a HardProtector, and suddenly I put in the Hard protector in my Komine Jacket, which I have had for a while, and it went in Exactly, although it is a Limit.
The shoulder and elbow protectors are expandable, so I did not need to purchase a separate protector. (As for the Chest Protector, as mentioned in other reviews, RoughAndRoad's Pocket is a large size, and other companies' protectors would not protect the chest properly because they would be too low.)
Compared to the original soft protector, the shoulder width GunDam is a bit wider, but that's not a problem if you think that's what a hard protector is like.
View detail