Reviews
When connecting the Battery terminal
When connecting to the Battery terminal, it is recommended to use round terminals instead of Y-type terminals.
Not sure if Plating in Gold color is required or not.
Electric Works Pliers are required when Cable is connected.
View detail
Economical for repeated use
Economical as it can be used repeatedly by replacing the batteries without expiration date
Magnet is included in the bottom of the body, so it can be attached to the Gold part of the body.
I think it is a good idea to have it along with PurpleSaver.
It conforms to MLIT safety standards, so it is safe to carry in a car.
The +− notation on the dry cell batteries is difficult to read.
View detail
To renew the terminal where GreenBlue came out.
I bought a battered 900SS (900SL) and am Restore.
The body of the car is in shambles, but the Harness is fine! There is no such thing as a "wiring".
As in older Italian cars, there is a Bullet Type Terminal connection on the large quantity, which is suspect due to corrosion and other problems, so we decided to redo it.
These are best new!
We were not sure how many we would need for the entire body of the car, so we bought 30 more for now, including the stock we originally had on hand, with the expectation that we would not run out.
Male and Female are Quantities:It is not a Set, so it would be nice if the application is to use only One Side for Large quantities.
(I actually had to use only Male this time when I converted RearBlinker to LED)
It is a common Bullet Type Terminal and has no excess or deficiency in performance.
The surface finish, ease of crimping, feel when inserted, ease of removal, and ease of pulling out are all standard.
Since there is no such thing as too many Bullet Type Terminals, buying them in bulk is a recommendation because it saves you from having to go out and buy terminals when you need them.
View detail
To renew the terminal where GreenBlue came out.
I bought a battered 900SS (900SL) and am Restore.
The body of the car is in shambles, but the Harness is fine! There is no such thing as a "wiring".
As in older Italian cars, there is a Bullet Type Terminal connection on the large quantity, which is suspect due to corrosion and other problems, so we decided to redo it.
These are best new!
We were not sure how many we would need for the entire body of the car, so we bought 30 more for now, including the stock we originally had on hand, with the expectation that we would not run out.
Male and Female are Quantities:It is not a Set, so it would be nice if the application is to use only One Side for Large quantities.
(I actually had to use only Male this time when I converted RearBlinker to LED)
It is a common Bullet Type Terminal and has no excess or deficiency in performance.
The surface finish, ease of crimping, feel when inserted, ease of removal, and ease of pulling out are all standard.
Since there is no such thing as too many Bullet Type Terminals, buying them in bulk is a recommendation because it saves you from having to go out and buy terminals when you need them.
View detail
Exactly for Light Van Transporter
Foldable and Compact! View detail
For Wiring processing
Purchased for Wiring processing. No problem. View detail
Quantity for Motorcycle also concerned about car inspections.:2pc. Buy the set
The smoke bomb had expired at the time of the inspection, and at this time, the smoke bomb was for Motorcycle and Quantity for Vehicle.:I bought 2pc
There was also a separate LED light, but I have a regular light separately, so this is the one I used this time.
Light intensity is satisfactory.
The included batteries are for test use and may not last very long, but spare batteries (Alkali AAAQuantity:I think there is no problem as long as you also have a 2pc) or replace it every 12 months or every inspection.
The texture of the lid is a little hard to open, perhaps because it is waterproof, and the "+" and "-" characters are hard to read for people with aging eyes. (Lol)
But the cosmetics are very good considering that they can be used for a long time after replacing the vehicle.
I also have an Emerson LED Sparkle light as a substitute for the triangular version, but it is best not to use it.
The Sparkle light is a very small size that goes under the Seat, but if you can fix it in an inconspicuous place such as inside the Cowl, we recommend that you do so.
Waterproof property seems to be quite strong, so.
View detail
amon Crimp Terminal Comprehensive little kit
Decent quantity of crimps Good selection of terminals. Bought this to ensure correct terminal for repairs. . Very useful and ready for next repair.Great value kit with a good selection. Ideal for everyone's tool box and in a handy case too.came with the little box and very easy to find and storage.Nice concise good quality crimp set that is essential in anyone tool kit.Needed a choice of crimps and terminals for urgent wiring job on motorcycle .They are easy to crimp with the right tool! got 5sets box for very cheap price.I really like this set and worth the money. buy with the confident .you'll get the quality crimp terminal set for lowest price..Need to remind WEBIKE packaging and fast reliable service .WEBIKE PACKAGING IS TOP NOTCH and very well secure.The only place where you can confidently buy the spare parts you need at the lowest prices . If you choose EMS , Shipping chargers are very Fair enough very well organized online shop . webike shop is very AUTHENTIC . 5STAR SHOP. Thank you webike for the support.I'm looking forward to buy more stuff .I highly recommended View detail
unaffected and sober
The price is high, but I think it is reasonable because it is well made.
It does not deflect when carrying a motorcycle or a person, so you can load your motorcycle with confidence.
View detail
It's well made, but....
Installed on High ace3 late model, WideMiddle roof car.
It looks and feels solid, but I can't get the Hook to work.
I had no choice but to use Tie Down's Sub belt.
View detail
Can be used without gapping.
If you stop the stopper, it will not gap. However, it is quite difficult to change the direction of the stopper once it is removed. Since it is a twist-off type, it feels like the plastic is gradually being scraped off. It is best not to do anything unnecessary once you put it in place. View detail
Excellent loadability, may be essential for transporting on road motorcycles.
[How is it used?
It is installed in the second row of the E25Caravan.
Since I am usually an Off-road motorcycleMain, I had difficulty transporter an On road vehicle.
It was difficult to pull from below, so we introduced this one.
I could have drilled holes in the Floor, but it was too much of a hassle, so I bought this one after seeing someone I know using it.
Was the one you received as per Image?
This product, which did not seem to be available, is a great way to scratch an itch.
I was worried about getting to Caravan, but it was no problem.
Was the installation difficult?
ScrewQuantity:It's 2pcs, so it's really easy.
How was your experience with it?
Good as expected.
It is small in size and does not get in the way at all.
I don't usually use the Hook much, but I don't mind when I don't.
As a byproduct, a board is strapped to the back of the second seat, which also plays a role in securing it.
[Included Parts:were they on?
Only the one in the product image.
[Was there anything that disappointed you?
Not at all!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I know it's not very demanding, but Quantity:I would have been happy if you could have made it cheaper, even if it was 1 set of 2pcs. or something.
View detail
Fits: Others TOYOTA 200 Series High ace
Leather suit is heavy
I am doing Road race and may open Rear hatch and put on Leather suit.
In my Leather suit, the Hatch comes down, so I added this Stopper to prevent this.
View detail
To be mounted in the car.
It is useful for in-vehicle use.
Large size is reasonable, foldable, not that heavy, and not too expensive. 1pc. is convenient to have.
View detail
I bought it for repair. Securely shipped.
I bought it to use it for motorcycle repair and the same product as the picture was delivered Because it was an outside product, I bought it cheaper than oem products View detail
Preliminary Fuse
I bought a spare fuse for my NC750X and opened the fuse box to check the fuse. I opened the fuse box to check the fuse and found that it was not broken, but it was the first time I had seen a short fuse. Be prepared and you will be safe! View detail
Preliminary Fuse
When I changed to 6V MONKEY/GORILLA Main Harness of Other Brand Product, Fuse box was attached, but it was Mini Flat Type Fuse, and I shorted it at the time of power supply branching, so I purchased 5 boxes, which is a lot for spare parts.
For some reason, the selling price seems to vary with the number of A's.
View detail
Cheap for an expensive product
First of all, the paint is inferior. How is it possible to ship the product as it is after it has been involved in a lot of Garbage?
Since the paint is in such a state, we can expect that the base coat is also not appropriate and that the rust inhibitor will not be effective even though the product will be used for a long period of time.
The Rope hook is also unnecessary for the Mushroom umbrella. The Tie Down Belt loop cannot be hooked because of this.
The fact that the door can not be in the collapsed position is another lack of ingenuity in the design. If you open it vigorously without knowing it, you will be crushed by the protrusion from the body of the truck. If you do not load multiple vehicles, I do not think it is necessary to replace the door frame (it would be easier to use as a Truck).
View detail
spare
I replaced the 6V MONKEY/GORILLA Main Harness with another company's 6V MONKEY/GORILLA Main Harness and shorted it when I reconnected the electrical system, so I bought this as a spare.
Quantity:1 Set of 3pcs., I don't think I will use all of the stones, but the price is not that much, so it helped.
View detail
Cospa is imma 1 to now 2!
The flange part of the drainage drain fitting is a BALI that might cut your hand, and the aperture part of the untreated stainless steel pan is a wrinkled aperture.
Even a manufacturer of cheap sinks can be out of the box with a quality control check.
If it is to be sold as Parts, the price should be 3,000- at the most.
I would like to see a more thoughtful pricing... Dear OGUshow
View detail