- Home
- Product reviews
- Accessories
- Trailer / Towing / Winches
- It's well made, but....... (Unit: Belt mount hook for Hiace 200 series)
【Unit】Belt mount hook for Hiace 200 series Review
It's well made, but....
Installed on High ace3 late model, WideMiddle roof car.
It looks and feels solid, but I can't get the Hook to work.
I had no choice but to use Tie Down's Sub belt.
ทำออกมาได้ดีแต่....
ติดตั้งบนรถ High ace3 รุ่นปลาย รถมีหลังคา WideMiddle
มันดูและให้ความรู้สึกมั่นคง แต่ฉันไม่สามารถทำให้ Hook ทำงานได้
ฉันไม่มีทางเลือกอื่นนอกจากใช้เข็มขัดย่อยของ Tie Down
Responses
Other reviews
It's super convenient to use it as a fall prevention device in the worst case scenario.
Purchased for front seatBelt.
Installation is easy, just remove the screw from the seat belt anchor and tighten it together with this part.
The pitch is very fine compared to the screw diameter, so if you try to put the screw in the slant, you will ruin the screw hole, but if you are not too clumsy, you can carefully put the screw in and it will be large and strong.
The first thing you should do is to screw in the screws by hand.
I thought, "Is this large enough? I thought so, but it's surprisingly large and strong, and the body side doesn't deform or the parts (3.0mm thick steel plate bent and punched out by PRESS) don't deform.
In the first place, it's not something that you have to jerk with all your might to pull the tie down, but rather something that supports the body of the car so that it doesn't fall down as it hangs from above.
No problems.
It doesn't get in the way during normal riding, and even if there is an accident, it is unlikely that the passenger will be harmed by this part.
It's also inexpensive (I don't want it to be expensive because of its cheap construction, but it's also reasonable because it's a bit of a hassle to try to make it yourself), so I don't think there's any harm in buying it.
The only weak point is that the vibration of the car makes it noisy and tinkly.
I have Anti-Vibration Rubber to prevent this from happening, but it still tinkles.
If you have a car that's silent or something, you'll probably notice it quite a bit.
So, before you put on the cover, it's a good idea to buy some dishwashing sponge at a 100-yen store, cut it into an appropriate size, and stick it in.
Well, I don't have to worry about it because I can just plug it in later.
If you don't want to do that, you can always use Tie Down and keep the tension on.
It's not something I'd use on a van van, but it's inexpensive, so don't hesitate to buy it when you need it.
View detail