Reviews
Fits: Others
I think Motorcycle needs it.
[How is it used? It is only for use in Touring.
Was the one you received as per Image? Yes.
How was your experience with it? I used to be forced to use a product for car use, but I think Motorcycle should use Motorcycle-specific products.
[Points to note] There is no Monitor screen on the Body and all checks are done on the phone.
How did it compare to other products? The price is higher than other Chinese products, but we understand that it is because it is a JAPAN product.
Other items that would be helpful
Point or hang of installation/Items to be purchased together/ Opinions and requests to the Manufacturer You need to download the app to your phone.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Easy installation on zx10r
Installed on Motorcycle as I am addicted to my phone.
RAM Mount's are easy to install.
Simply remove and replace the Bolt on the Stem.
It is equipped with a locking agent, so it takes a lot of strength.
View detail
Wish I had switched to this earlier.
It is TORQUE 5G and it is just the right size. Just by clamping it, even if it is a little rickety, it doesn't gap at all. It is as expected from Ram Mount. View detail
Fits: Others
Versus DAYTONAMiVue M777D
[How is it used?
I was not sure about the DAYTONA in the same price range, but I decided to go for the ActionCam.
I decided to use Mistuba Sankowa because the removable feature is a hindrance to the contrary.
Was the one you received as per Image?
I think it is as good as the previous reputation.
Was the installation difficult?
The affinity with D-unit is more in favor of DAYTONA. However, installation is possible, so it is not a problem.
How was your experience with it?
Both have their advantages and disadvantages in terms of recording method and size, but I am personally satisfied with Mistuba Sankowa.
[Included Parts:were they on?
Some vehicles may need a separate Bracket, but I think it's supposed to be unobtrusive.
Homesense DIY will not be a problem.
I am generally satisfied, but it is a hassle to have to connect to my phone each time to synchronize the clock.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
Installation of a driverless car stereo system (AKEEYO AKY-958N) on a Ninja 250
I used it on my Ninja 250 (2021). The driver's license plate is AKEEYO AKY-958N. It was not listed as a compatible driver's recorder, but I was able to install it without any modification. The size and appearance are good, and the position of the front camera is also good. I put the body of the camera under the tandem seat, and although the wiring was a little troublesome, the bracket made it easy to install the camera. It's only been a month since I installed it, but no problems. View detail
Fits: Others
For insurance?
As is the case with cars, recently, there are many people who are closing the space between cars, and I have to give way more and more often, so I have to be defensive.
I purchased it. However, after purchasing it, I was not motivated to install it, so it was left unattended for about six months.
It took some time to devise the space, wiring, etc., but the images are quite beautiful and I am satisfied with them.
Reliability, etc., remains to be seen.
The only thing that went wrong was that I purchased front and rear brackets for installation, but because of the wide angle, it was sufficient to use double-sided tape on the car body as it was.
View detail
The desire to use beautiful images separately...
The length of the wiring etc. was appropriate and the installation was easy. However, the connection with the smartphone did not go well, and although it was connected with the old smartphone, it did not go well with the New Model smartphone. It is a soft that does not reach the heart. The images are very clear, and if there is a software that can connect broken images well, I think the use of UTUBEetc. will progress. View detail
EDR-22G ZX-6R G type
Installed on a ZX-6R G-type.
The picture quality is beautiful.
It was a wider angle than I expected, so a little something would show up both in front and behind.
However, if I make it protrude to the point where nothing is reflected, I am concerned about the sense of protrusion, so I give up on it.
I am satisfied with the functionality as a DriveRecorder.
What I'm concerned about
Even if I change the PASSWORD setting, it reverts to the initial PASSWORD when I remove the power.
Since both Camera cables are the same length, the front one is not long enough, so it is extended. There is a lot of excess in the back.
I think the Body place should be closer to the front or the back, so it would be nice if you could change the length.
View detail
Beautifully captured!
The picture quality is beautiful.
There doesn't seem to be any kind of image stabilization, so when the Motorcycle shakes, I feel like I'm getting a shaky shot.
Wiring, etc. was easy.
View detail
It fits well
Exactly to Gixxer SF because it is vehicle specific. the drarreco is from DAYTONA so it is a non-compatible combination so I put it on at my own risk. View detail
REC-MOUNT25 Holder Attachment A35 Used in conjunction with
Sold on Amazon REC-MOUNT25] Holder Attachment (A Parts) A35 The EDR-21Gα's FrontCamera is mounted with a RAM Mount in conjunction with the EDR-21Gα's FrontCamera.
The quality of the product is neither particularly great nor cheap, but I frankly feel that the price is too high for such quality.
The quality of this product could be sold for $1,000, but I bought it because there is no alternative.
I am satisfied with the feel of the product as it fits EXACTLY into Camera.
It is very Exactly, so when you put Camera through it, you have to spread it out a little to the side to get it in.
I don't think it will break that way because once it's on, I don't think I'll touch it until I remove all the drarecorders.
View detail
As expected of a ManufacturerOEM, it was installed neatly and without any unnecessary parts.
I use both front and rear Camera for EDR-22G.
It is used to tighten the holes in commercial Gold folds.
Because it is used in a narrow space, I changed some Bolts from Included Parts:to ones I purchased separately myself before installation.
The price is a little high because it is a Manufacture OEM, but it is a just fit for Camera, and the extra parts are not visible.
When tightening the Bolt, the paint or plating peeled off, and the peeled part rusted prematurely.
I hope the rust doesn't spread further… It hasn't been installed for a month yet, so I don't know how durable it is.
View detail
It is good that the body is now Small Type.
I have been waiting for EDR22 to be released.
It is used in SS where mounted Space is limited.
The body and power supply have been separated to create a small type unit that is easy to install and has room to spare even when co-located with an ETC.
There is no Cover at the base of the Stag beetle terminal to catch AC power.
It is better to insulate it after installation.
View detail
Universality
We selected this product to install Tire's wireless Air gauge Monitor.
The 1/4-20UNC screw for general camera use can be used.
There is no retightening component, so the angle must be adjusted after the Camera or other device is firmly screwed in.
View detail
Select Length
We selected this product to install Tire's wireless Air gauge Monitor.
The large handlebar may be difficult to tighten depending on the installation location and angle.
I chose the standard size without thinking, but the short size seemed to fit better.
You may choose Standard or Short by taking measurements of the mounting location.
View detail
racing (of an engine)
To install Tire's wireless Air gauge Monitor.
We chose this product, which uses Stem holes, because we did not want to increase the number of conspicuous Mounts.
I could not get the installation to work and when I repeated Cut, it went blank.
Instead of following the instruction manual, once the cut is made, the Stem hole should be filled to the Limit.
Tightening Bolt and expanding Body may work.
It will not come off, so it will be used as is.
View detail
I installed it myself.
I think the performance is perfect. But, the SDCard comes with 64G forcibly. Why can't we freely choose the card we think we need? 21Gα+128G Quantity:I was very confused with Set. View detail
Fits: Others
Safe and secure DRA RECORDINGS are a must from now on!
I installed it on a 2021 ninja 250.
The connection itself is easy because it is color-coded, but the wiring was quite large and strange.
Since it is a Motorcycle with Cowl, this is not a Minus rating, as it cannot be helped.
I was worried about taking out the ACC power supply and creating and connecting the Bullet Type Terminal, but managed to do so.
Picture quality is fine.
Using the smartphone app is easy once you get used to it.
You can check the video from your phone on the spot and download it to your phone.
Items purchased in addition to the above
Power Outlet Port Harness
Brand:KITACO:KITACO Item number:756-9000400
Terminal set
Brand:amon:Emon Item No.:E2
Camera Bracket for EDR
Brand:MITSUBA:Mistuba Sankowa Item number:EDR-P04
View detail
Used for Mistuba EDR-21 installation.
Purchased and installed on Mistuba Sankowa EDR-21 for Rear.
I looked around and chose this product.
Install RearCamera with License Plate
It looks neat and clean.
License Plate location so
The rear of the vehicle was captured perfectly without any blind spots.
Installation was very easy.
View detail
Just right for a driver's recorder.
For storing DriveRecorder data.
It is an ordinary small SDCard. It is inexpensive and 8GB is not so much of a problem.
A special case is also included to prevent accidental loss.
View detail