Reviews
It is hard to get through Bar End.
It is used to temporarily lengthen a handlebar that has been shortened in overall width, and when combined with the EBB301K Bar End, it returns to the Japanese Vehicle Inspection Correspondence. I was able to get it through by using a heat gun, lubricant, and a rubber hammer. I am afraid I could not pull it out, so I will keep the Bar End and this product in quantity.:It will be used in Set. It's good because it's only for car inspections…. View detail
I've been waiting over 6 months for this...
I am a New Model KATANA rider. 。 Ordered in spring, delivery delayed…. Delay…. Also delayed…. It finally arrived at the end of the year.
Now, assemble it ? But the middle of the three mounting points don't fit together. 。 I managed to attach the Right Side by enlarging the holes in the bracket to the limit, but the Left Side is not attached at all. 。 Bracket is attached to a ton of places. 。 In the end, the Firmly fixed Bracket was scraped off and the Bracket was remade and fixed and finally installed.
I heard from fellow KATANA members that A-TECH products are no good? so I wasn't too surprised.
If I returned the product with an Objection, I did not feel like making an Objection because I thought I would have to wait another year to receive the product again.
Anyway, it seems that A-TECH's Carbon parts have many Objections.
Those who order should be prepared to order.
View detail
Images alone are not good enough.
It is a compromise because it is inexpensive, but I still couldn't tell the Fit feeling from the image alone.
Size:Even though it was Free, it was a little hard on Small.
I regretted buying it.
Well, it is Point payment, so I will compromise, but I will probably not use it and keep it or give it to someone else.
I realized that I should not buy just based on images.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z1000, KAWASAKI 1400GTR, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI Z1000, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Pad replacement
Normal. Good cosmetics. Large inventory. View detail
Air bubbles will be noticeable.
My first impression was that it was smaller than I had expected.
It is a little small for a Large Motorcycle, giving the impression of unbalance.
The advantage is that it is transparent and allows the best of the paint to be used, but on the other hand, air bubbles can be noticeable, so it must be properly warmed up and applied neatly.
If the angle of the tank is sharp, the edges will peel off, so you need to warm it up thoroughly and degrease it before applying it. I replaced the tank pad with another one because I was concerned about air bubbles and the shape of the smallest tank.
View detail
I think Dress-up is the main one.
[How is it used?
I installed it on a vehicle that I normally use for Race.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It is easy to replace the original screws by simply loosening them with a screwdriver.
How was your experience with it?
I was told that I could turn it by hand, but with my vehicle, the hose was in the way and hard to reach&I couldn't turn it by hand.
[Included Parts:were they on?
There is none
[Was there anything that disappointed you?
Cannot be turned by hand.
It may be a good idea to purchase them as dress-up parts, but you may not want to replace them for practicality.
View detail
The product came with scratches.
As per Title, I received a scratched product. 。
The price is quite expensive, but I guess that's what you get from an outside parts company. 。 The installation method is also quite insecure, just drilling holes and screwing them in. 。 So I'm trying to figure out if I can put 3 points on Bolt and Nut, but this is very difficult (especially Quantity).:Pair (for Left and Right) (MF10 is a large strange thing, like if you do this, you can't put that, or if you put that, you can't put this afterwards. 。
I think it looks nice, so it's good for someone who can afford almost 30,000 without worrying about the details.
View detail
That's DAYTONA!
I guess it means that DAYTONA is the distributor of MAGGI, but the same size on Amazon is DAYTONA and Webike is MAGGI, then I should buy from Webike. So, I'll buy it from Webike.
I thought it was DAYTONA. Absolutely not." I was not saying that I wanted to buy DAYTONA products, but I wanted to avoid them because I have been making a lot of mistakes buying DAYTONA products recently, emotionally.
View detail
Processing required
The guide on the body side of the mounting bracket was not attached as it was because the body attachment part of the mounting bracket and the guide on the body side were in contact with each other. The screw fastener of the mounting bracket also interfered with the box part of the air filter when the length of the wrench was too long, so I wondered whether I should cut the wrench or not, but I loosened the box side and shifted it to close. View detail
Fits: SUZUKI V-STROM1050, SUZUKI V-STROM1050 XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI V-STROM1000 X, SUZUKI V-STROM1000 XT, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-10R, SUZUKI GSX-R1000, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000
Public road0Circuit×.
Used for 1 hour on Circuit for several hundred kilometers on public roads.
There is no problem with sufficient braking power on public roads.
In Circuit, I felt that the Control property is good, but the touch is slippery and the effect is sweet compared to a certain Golden.
When we disassembled the unit, we found that the red paint was burned black and splattered.
There may be no problem with functionality, but if it is going to be like this, why not just paint it from the start?
The thickness has also decreased by about 1 to 1.5mm just from the above use, and the performance is not particularly good, but the decrease is fast.
There is no Repeat because there is no better place for performance and price compared to Golden.
View detail
It is covered with scratches.
Installed to protect the Meter panel.
It is unfortunate that Film is so easily scratched and the line scratches are all over just wiping off the dust.
I would like to see an improvement in the Material to make it less vulnerable.
View detail
Pricey OEMParts
I bought this product because it was the company's Bore Up Kit and there was an entry in the description that said it should be replaced.
When I received the package, I found that it was just YamahaOEMParts in the KN project Package.
The things are OEMParts, no doubt, but it is cheaper to buy OEM as-is, and since OEMParts are available at Webike, we do not recommend buying this one.
View detail
Fits: KAWASAKI SUPER SHERPA
Bolt On by Limit Car Type
I purchased a SUPER SHERPA specific Brake hose for front and rear.
Banjo angles are not good, both front and back, like NORMAL.
It was impossible to install Hose in Line.
One more thing, you can specify the color of the hose, but the Banjoetc.
The color of the bracket cannot be specified, and the colors of the front and rear banjo are different,
There is no unity.
Is this how it is with out-of-print for-vehicle parts management?
But I managed to attach it and it's not inferior in terms of functionality,
I am going to use it for this.
View detail
Unexpectedly cheap
The face is large, the design of the letters is good, and the brand logo is not bad looking. However, it is only when you hold the actual product in your hand that you will understand. "Chutzpah." The resin band is like a thick rubber. The resin band is like a thick rubber, and the gold sound is like a toy bell, perhaps because the quality of the band's bracket is low and too light. I think I can understand why the used ones were sold at a low price on the flea market site. View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D, YAMAHA XJ400S, YAMAHA XJ400, YAMAHA SR400, YAMAHA FZR400RR-SP, YAMAHA FZR400RR, YAMAHA FZR400, YAMAHA FZR400R, YAMAHA FZR400
UV sensitive, torn after one year.
The 2LSize is too small for the MT09. Also, it seems to be weak against ultraviolet rays, and the part that was exposed to the sun well deteriorated and tore after not lasting a year. View detail
I don't see the need for it on public roads.
I have not ridden on it yet since it was installed.
The reason for this is that once installed, OEMSeat is no longer available!
View detail
Cylinder replacement
I took down the head of the MONKEY to replace the valve, and when I removed the head and checked the cylinder, I found it was damaged. It would be very helpful if I could buy the parts I want at Rose, but the quantity is very limited.:It is not cosmetic as it is a Set purchase. I hope it will be improved. Also, it is R-STARGE+D Squat106, so it is quite fast, but the MaintenanceCycle is short! (Maybe it's just mine?) View detail
Fits: KAWASAKI 650RS, KAWASAKI 650-W1, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 400SS, KAWASAKI 500SS, KAWASAKI 500SS, KAWASAKI 500SS, KAWASAKI 750SS, KAWASAKI 750SS, KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI Z2, KAWASAKI Z1, KAWASAKI KH250
We can only be thankful that we have Parts….
It functions as a Blinker Bracket.
The shape is completely different from that of the OEMBracket.
That's the fate of Ripro products, we should be thankful that Parts is sold.
We do not recommend this product for the finicky or nervous person.
View detail
It was impossible to install on CF4EA without modification
I installed it on a CF4EA, but it interfered with the WireGuide that unlocks the Seat and could not be installed without modification.
We responded by sanding the interfering parts.
View detail
My fingertips are cold.
I bought it for winter touring in the Kanto area.
The moment I received the product and checked it, I felt there was not enough padding. And as you can imagine, when driving on the highway on a cold day, the fingertips quickly become cold and painful.
Other companies' Winter Gloves that are not electrically heated are much warmer. I think this product is not as warm as the others.
Furthermore, the smartphone support is only on the side of the index finger; it is impossible to operate Pinch and the sensitivity was very low to begin with, making it almost impractical.
The size seems to be slightly larger than other companies. I have long and narrow hands, so I have to choose XL size for gloves because of the finger length, but this Manufacturer's L size fits my finger length.
View detail