Reviews
หามานานกับสวิทช์ไฟเปิดสปอร์ตไลท์รถยนต์ อยากได้แบบแปะติดกาว เพราะไม่อยากเจาะให้เสียรถ ใช้งานดีมาก ดูเรียบเนียนกับรถยนต์ดี สวยงามมาก View detail
ของถึงไว ส่งเร็ว รอไม่เกิน7 วันของส่งมาถึงหน้าบ้าน ท่อสวย แพ็คมาอย่างดี มีกันกระแทรก เสียงเพราะ สวยกว่าที่คิดเยอะเลย คุ้มสุดๆ View detail
It seems lighter than NORMAL.
[How is it used?
The NORMAL cable was damaged due to age-related deterioration, so we decided to upgrade the cable as a replacement.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It is only to replace the Normal cable, but it is better to record how it is attached with a photo or other documentation at the beginning.
This will be helpful when making Brake adjustments later.
How was your experience with it?
It may be because the Normal wire was getting old, but I think the Stainless Steel wire made it lighter.
It also eliminates Rust concerns and is expected to be durable.
[Included Parts:were they on?
A simple Instruction Manualetc.
[Was there anything that disappointed you?
Not at all.
▼ I never used it to the end because I replaced it with a Disc brake, but I kept the shine intact.
View detail
It is light but also rigid!
[How is it used?
I decided on this one because it is lightweight and looks sturdy, along with the Pipe Handlebar conversion!
Was the one you received as per Image?
It was just like the Image, although I put it to sleep quite a bit.
Was the installation difficult?
Although the STD Handlebar was replaced, it was done at the same time as the Pipe Handlebar conversion, so it was quite a large change. If you make a mistake in the order of installation, you will have to redo it.
How was your experience with it?
I used it after a considerable amount of sleep, and my impression is that Position was very easy to use.
[Included Parts:were they on?
There was no other.
[Was there anything that disappointed you?
There was nothing in particular
▼Handlebar braces are also added to further increase rigidity.
Also, for Handlebar width, Material:Aluminum makes it easy to cut for fine adjustment.
View detail
Fits: YAMAHA FJR1300, YAMAHA YZF-R1, YAMAHA FZ8, YAMAHA YZF-R6
To reduce numbness in the hands
I was suffering from Handlebar Stainee phenomenon and Right hand numbness on my FJR1300AS2016 MODEL. Although the Stainee phenomenon did not improve, the time until the shaking started was a little longer. The numbness in my hands improved a lot, and long distances became much easier. After that, I replaced the Tire and the Stain- phenomenon disappeared. The only thing I am worried about is that even though the Bolt is tightened firmly, it seems to bend or break when I put my hand on the tip of the Bar End, perhaps due to the weight of the Bolt. Therefore, I cannot put my weight on the outside of the Grip. Also, I think it is NG for inspection because the width of Handlebar is widened. View detail
Quantity in images:2pc. Since it was a Set, the Quantity:I thought it was 1pc. unit in Pair.
Quantity in images:2pc. Since it was a Set, the Quantity:I thought it was 1pc. unit in Pair and placed an order.
1 (One Side) If you buy two cases, it costs 6,600 yen.
Quantity at about $3,000.:1 Set of 2pcs. and there were many more functional products.
I will never recommendation.
View detail
Stable TANAX NapoleonOnMirror.
Stable TANAX NapoleonOnMirror.
A gem that is both visually appealing and easy to see.
However, the paint will surely peel off if you do not wrap the curing tape for installation.
View detail
Fits: YAMAHA Zeal (i.e. a Zealot), YAMAHA XV400U, YAMAHA YJ50SP, YAMAHA XV1100, YAMAHA SRV250, YAMAHA V-MAX1200, YAMAHA SRV250S
Large and easy to read Mirror!
[How is it used?
KIJIMA's Mirror was not practical and was replaced in tears.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It is only a replacement for the NORMAL. It can be installed without any problem at all.
And since it is for Yamaha, no Adapter is needed.
How was your experience with it?
It is large, not blurred, and very easy to see.
[Included Parts:were they on?
There was nothing in particular
[Was there anything that disappointed you?
It is a little too large to be stylish, but I would give it a high score.
▼Mirror is Large but this Mirror is easier to see than Normal and is a good recommendation with good parenthesis!
View detail
Vibration made it shaky and unusable.
[How is it used?
I replaced it with Small Mirror because I wanted to make it Stylish.
Was the one you received as per Image?
The Mirror was smaller than the Image.
Was the installation difficult?
It was easy to do as I only had to replace it with NORMAL.
How was your experience with it?
Perhaps because of its slenderness, the vibration caused severe blurring, making the situation unbearable to watch.
Not practical.
[Included Parts:were they on?
There was nothing in particular
Yamaha cars must be fitted with Adapter.
[Was there anything that disappointed you?
It was too small to see and too dangerous because of the vibration.
Since ▼Scooter has this blurriness, I think this Level is enough to be known during testing at the time of product development. This is a Level that we would like to see the company make sure of.
View detail
It's cheap and looks great!
[How is it used?
I installed it because I thought it would rust if I could see the Screw part of the Mirror.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
We will install them together when we replace the Mirror, but it should be easy to do.
How was your experience with it?
No problems at all, it works and looks Refreshing.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular. It seems to be durable.
View detail
It's absolutely RECOMMENDATION over NORMAL!
[How is it used?
The normal cable is getting old and is not working well, so we decided to upgrade the cable as a replacement.
Was the one you received as per Image?
Parenthesis is good because you can see that it has been replaced by the color as shown in the Image!
Was the installation difficult?
It is only an exchange with the NORMALClutch cable, but for the first time, you may be confused at the spring part on the clutch receiver side.
How was your experience with it?
The Normal cable was old and no good, but this one with Stainless Steel Wire is lighter and seems to be more durable.
[Included Parts:were they on?
Quantity:Since it is a Set, RubberBoots, etc. are installed.
[Was there anything that disappointed you?
Not at all. I am satisfied.
▼ The construction is pretty solid, and I think it's a better product than the NORMAL!
View detail
It looks better now and I'm Large satisfied!!!
I really wanted to replace the OEM footpeg because it was too large and didn't look good, and most importantly, it was in a low position.
The installation took about 3 hours as I worked while resting.
I rode a little closer, but the position was much higher up and back, so the feet fit better for me.
View detail
Fits: SUZUKI GSX750S KATANA, SUZUKI GSX1100S KATANA
Shift rod rust free.
NORMAL steel ROD rusts and looks bad, so Material:I replaced it with this ROD in Stainless Steel, and I could feel the Shift touch getting better. View detail
Fits: HONDA GORILLA, HONDA MONKEY
Can be used for groms.
[How is it used?
Rear suspension was replaced and ride height was increased.
Was the one you received as per Image?
Well, it's CQuality, but it's cheap, so it's OK.
How was your experience with it?
The angle is now as per Image.
[Points to note]
Side stands switch must be cancelled
Also, Screw can be put in from the back.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
For those who use in Grom, please buy Side Stand Switch Canceller
View detail
KATANA 2022, Gold color is MATCH!
I bought it not only because of its function as a Slider, but also because I liked the way it looked.
I like the look of the KATANA because the front fork is Gold for the 2022 model year, so it has a MATCH look.
I don't know how effective it is as a Slider yet, since it has not been rubbed.
The installation itself is easy, but the Hexagonal Wrench is a Quantity:2pc required
View detail
There is resistance to installation.
The beauty of NAKED is around the bare Engine!
I am wondering when I should remove these parts from the car, as I am not comfortable with them being installed, as they are seriously detracting from the appearance of the car.
View detail
Bolt On with high accuracy
The car was installed as both a dress-up and to protect the bare underside of the car.
Bracket part is Steel (Black painted) The guard is made of silver anodized aluminum, but we painted it matte black by ourselves.
I like the way it looks with the Black Engine part of the Grom.
Installation can be done with the Instruction Manual and tools without any difficulties or problems.
The area around the engine is very hot, so I used Thread compound to prevent the engine from being burned, but the Instruction Manual does not specifically mention it, so I think Large is strong enough without it.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
In zx10r.
I wanted Stand Hook and bought it.
It works fine
I thought it would be short, but it doesn't stick out, just right.
Recommendation.
View detail
Fits: HONDA glom, HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA glom, HONDA HRC Grom(GROM4), HONDA HRC Grom (GROM5)
Balance with Rear suspension
I think it is necessary to improve the balance with the rear suspension.
When I replaced the rear suspension, the softness of the front fork stood out, so I put in a KYB 20, but now I put in a 6.0N and it is more stable and balanced.
View detail
Fits: YAMAHA VINO, YAMAHA VINO, YAMAHA JOG (2Cycle), YAMAHA Scooter type, YAMAHA JOG (2Cycle)
VINOShock
About a year ago, the OEM Shock died.
Tire was getting reduced in waves, and as expected, it was at the end of its usefulness.
it is exchanged 。 Installation is easier than you might imagine, and the screw quantity:2pcs to finish.
I thought it was a little longer than OEM, but when I put up the stand, the rear tire was not as long as the OEM tire.
I think it is good because it is floating.
As for the ride quality, it is incomparable to the dead Shock.
Snap and legs are now in place.
The plating is beautiful, inexpensive, and good looking.
View detail