Reviews
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB250F, HONDA DN-01, HONDA REBEL250, HONDA CRF250M, HONDA CRF250 RALLY ABS, HONDA CRF250L, HONDA CBR250R, HONDA CRF250 RALLY, HONDA CB250R
Standard Windshield IRIDIUMSpec. I can't tell the difference from normal Plug.
I bought a used CRF250RALLY50MD44 with 12,000 km on the odometer and replaced all consumable parts.
Iridium plugs were adopted as standard, which was not expected.
I cannot experience that it starts particularly well or is Torque fully.
I have owned almost all 250 Class Trail bikes and Motard bikes, including those of other companies, so I am certain of this.
It's an expensive Plug, so I'm going to run it in with high hopes for durability at least.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY S, HONDA CRF250L, HONDA CRF250L S
(Current status) Dress-up 90%, functionality 10%.
SP Tadao It is a combination with PowerBox Pipe
The combination is not recommended by the respective Manufacturer and
Installation is solely under personal responsibility.
Gasket between Exhaust pipe and Silencer pipe
SP Tadao PowerBox + Normal silencer is not required.
Normal pipe + YOSHIMURAExhaust System
When
Installation Instructions Manual for each product.
Tentatively assembled.
It doesn't seem to make much sense to put it on.
Gasket was not used to do the work.
Installation takes just over an hour.
It is better to temporarily assemble the silencer band & bracket first to make progress.
The sound is LARGER than NORMAL
The sound quality is not as caged as that of NORMAL, and it has a high, clear sound.
I can feel the change itself.
I feel a bit concerned about warming up my own Apartment on the bike parking lot!
As for functionality, I just did a short run around the neighborhood,
at present
I have not been able to experience the same power output increase etc. as when the PowerBox was installed.
■Personal Evaluation
Dress-up 90%,
Functionality 10% (*Contributes to weight reduction, although no output increase can be felt)
So I have to say that Cost performance is low.
If you have a problem with Gold, it might be the first Parts you release...
View detail
Works like a skid plate should
Installation will require only 5mm bolt. Color match is wonderful for bike. Immediately took this to a local trail to test it out and managed to slam it on some rocks. Held up great, took a bit of damage but that's what it's for! Its tough but it's still plastic so I'm sure it has its limits.something to protect the finish on the frame and keep the mud off the motor.Little to no gaps, excellent coverage of major components.You will need to remove this skid plate when you change your oil.But if you are a little lazy about your oil changes, this may not be for you.This is the perfect solution and was reasonably priced. View detail
Fits: KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI RM250, SUZUKI DR200, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, HONDA FTR250, HONDA CRF250R, HONDA AX-1, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500, HONDA CR500
Genuine DID 520ERVT Replacement Chain Link
I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERVT is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. I keep the rivet link type and this clip joint type but had ran out of this version, hence the purchase. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Cool
This is Cool, although I honestly don't know how effective it is.
Red is good.Color:Red is unexpectedly suitable for Gray Motorcycle.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Hokkaido Tour
this summer
Hokkaido Touring Schedule
Little by little, we prepare for that.
Removed for forest road touring
with ScreenKakeTamaMaju I can't mock up comfortably.
Easily removed by PointUp??
View detail
![VX Series Chain 520VX3 Silver [with Caulk (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_S&S_P_TS.jpg)
Fits: KAWASAKI KLX650SR, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, HONDA FTR250, HONDA CRM125, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA XJ6NA, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, HONDA CBR500R, HONDA Rebel300
I like the chain
I purchased it on the recommendation of a motorcycle friend at the same meeting. I replaced the chain last year and have been using it for 10 months. Compared to the existing factory chain, the shifting is smooth and the direct connection is very good. I chose silver as the color and it looks very clean, so I feel refreshed every time I drive. -------------------------------------------------- -------- I purchased it on the recommendation of a motorcycle friend at the same meeting. I replaced the chain last year and have been using it for 10 months. Compared to the existing factory chain, the shifting is smooth and the direct connection is very good. I chose silver as the color and it looks very clean, so I feel refreshed every time I drive. Powered by Google Translator View detail
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF1000L, HONDA CRF1100L
Not that I'm complaining.
I have not tried riding without the rubber, but I think it is a good solution if you remove the rubber. Also, the quality of the product is good, and compared to Chromoly products, the Material:I think it's also good that Parenthesis is made of aluminum, and as a footpeg, it's quite wide, so I felt it's good that my feet don't get tired easily. View detail
Easy to install
Installation is really easy, taking less than 10 minutes. The texture is good, and the Pipe on the thick body is a nice parenthesis. If I have one complaint, it is that it is not designed to be installed with a helmet holder, even though it is an Endurance Carrier. Other than that, I am satisfied. View detail
Somewhat difficult to install
Screws could not pass through and the hole was widened with a 6.5mm Drill for Gold.
Also, USB port and voltmeter are Quantity:The set is great, but you need to cut 5mm off both ends of the middle collar and the bracket to install it on the CRF250 body. The above mentioned work was necessary when assembling the Headlight unit, which is not shown in the YouTube video. The light is very bright and I am satisfied with it.
View detail
![PREMIUM ZONE Oil Filler Cap [M20XP2.5]](https://img.webike-cdn.net/catalogue/images/15651/91885_O01_TS.jpg)
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI KLX250, KAWASAKI ER-6, KAWASAKI ER-4n, HONDA MONKEY, HONDA ZOOMER, HONDA XV1000V, HONDA XR50 MOTARD, HONDA XLR250R, HONDA XLR250BAJA, HONDA X4, HONDA VTR1000F, HONDA SL230, HONDA PCX, HONDA PCX150, KAWASAKI ZXR750, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900
The oil filler cap is very convenient to use and decorate
Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I'm not sure about the electrical system, but ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
These are the Parts that are required when using LEDs with DRC's Kit.
View detail
having an effect
I am glad I put it on. I am satisfied because I could feel the Torque became thicker from low rpm and the acceleration feeling was improved. I think anyone with some maintenance skill can do the installation, but I thought it would be easier to remove the O?Sensor connector first. View detail
PowerBox installation
[How is it used?
Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
The gasket attached to the inside of the Exhaust System side was difficult to remove.
How was your experience with it?
I didn't experience it as much as I thought I would.
[Included Parts:were they on?
Instruction Manual、Screw、Band
[Was there anything that disappointed you?
There is none
Items to buy together
Gasket and liquid Gasket
Liquid Gasket may not be necessary
View detail
Fits: HONDA CB250F MC43 all models, HONDA CBR250R MC41 All models, HONDA CRF250 L MD38 All models, HONDA CRF250 M MD38 All models
Purchased for PowerBox installation
Purchased for PowerBox installation.
One piece is all that is needed.
I had a hard time removing the old Gasket.
The new one, after applying liquid Gasket.
If it is attached, it will not come off.
View detail
Fits: YAMAHA WR250R, KAWASAKI ZX-25R, KAWASAKI Z900, KAWASAKI NINJA250SL, HONDA CRF250M, HONDA CBR600RR, HONDA CB400SF, HONDA CBR1000RR, HONDA CB1100, YAMAHA CYGNUS X, YAMAHA Majesty-S, YAMAHA NMAX, YAMAHA WR155, YAMAHA WR155R, YAMAHA WR250X, HONDA Dax70, HONDA Dax125, HONDA APE100, HONDA PCX, HONDA PCX150
Even if it looks good….
I noticed after I bought it that it looks good, but it doesn't have a Level gauge! I like the look of the Parenthesis, but I'm not sure if it's a good idea.
When we check the amount of Oil, we'll see if there's a problem with the replacement.
View detail
Fits: HONDA CRF250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, SUZUKI RM250, KAWASAKI KLX230, KAWASAKI KDX250SR, KTM 450 SX-F ie, KTM 450 SX-F, YAMAHA WR450F, YAMAHA WR426F, YAMAHA WR400F, YAMAHA WR250Z, YAMAHA WR250Z, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250F, YAMAHA WR250, YAMAHA WR250, YAMAHA WR200R
Genuine DID 520 Replacement Chain Link
I always like to have some of these in stock in case opf any issue during fitting different chains. The DID 520ERT3 is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
I am very satisfied with the fast delivery. Thank you webike.
I am very satisfied with the fast delivery. Thank you webike. I will repurchase it next time The packaging of the product is very good View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Clutch lever replaced at the same time as the brake
Like the brake lever, the clutch lever was replaced with a ZETA PivotLever.
This is also my favorite Lever as I have used it on my KLX230R and have tipped it over many times, but the Lever has never broken, and it feels better to operate than the OEM.
After the lever is replaced, the clutch cannot be cut without adjusting the play of the wire, but this can be easily adjusted since it is a wire type.
I prefer 3Finger, but CRF250L has a light clutch lever, so even 3Finger lever can operate the clutch easily.
View detail
Fits: DUCATI 1199PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI 1299PANIGALE, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE S, DUCATI 848, DUCATI 848 EVO, DUCATI 899PANIGALE, DUCATI 959PANIGALE, DUCATI DIAVEL, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER1100EVO, DUCATI MONSTER1200, DUCATI MONSTER1200S, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER821
Oil Filler Cap
Changed to Green Light or Gold. View detail