Reviews
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Trusted OEM Parts Number
TMR O / I used it in H.
Carburetor is a part that deals with Gasoline. If Gasoline leaks
Since I can not laugh, I chose MikuniOEM without hesitation.
I think stocks of these small parts are the charm of webike.
View detail
Anyway it will be saved
There are plenty of Jet stocks and it will be helpful.
Especially when Tune Engine, it is nice that there is a Size which is not sold in mass retailers.
View detail
It depends.
Because it is a society person, it is difficult to go to a mass merchandising store on weekdays and shop.
I would like to use the weekend's time in a meaningful way, so it is very helpful to have stock in WEBShop like this.
Desire to say, inventory of Racing carburetor Parts
I want you to enrich it.
View detail
Used for TMR
The Idling screw of TMRcarburetor can not be adjusted easily depending on the type of vehicle, as it is in the middle in the case of a 4 carburetor.
We are introducing this product because TMR which we are using for gpz 900r is also difficult to adjust to Mita and it is difficult to adjust. The operability has improved significantly
View detail
Thank you for stock.
There is no good or bad in this Parts.
However Even in a mass merchandise store it is out of stock Webike immediate delivery is a trick. It is appreciated.. If Setting is not decided, I will take care of you again (^ ^ ;; Thank you in the future.
View detail
Purchased for Carburetor setting
Purchased for Carburetor setting. I think I will get it cheaper than OEM Product.
Many things that do not have inventory, in that case it seems that delivery takes several months, so I felt inconvenient there only.
View detail
Delivery is long
Used for RG 125 γ.
MainAir Jet used for RS 250 of RGV 250 and Aprilia (MAJ) Or Pilot air jet (PAJ) It is the same as. Even if I try to order an OEM product, it will be helpful to get it on Wye Big because the deadline is long, ProductNo is not known, or the price is high.
Those items that are not in stock even though they are carburetor's setting parts, it seems that delivery takes several months, and it is inconvenient when there is no stock in SEA BASS or WEB BIG.....
Especially if you are using the TM34SS, this is a substitute for Air Screw and you will not be able to obtain it.
View detail
MikuniMikuni Filter adapter
It is purchased to attach a power filter of 50 mm inner diameter to TMR 36.
Installation is not a problem at all.
You can also install DNAPower Filter and PMCPower Filter.
In order to install the PMCPower Filter, I think that stable installation can be done if the installation part is slightly longer than 3 mm afterwards. (Rubber part of Power Filter is thick and interferes with the lower part of Carburetor)
There is no problem if you do not mind saying it.
DNAPower Filter has no interference since the Rubber part is thin.
From now on FunnelSpec. And here Spec. It seems to be enjoyable with.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
It is a consumable item.
There is a place indispensable for throw adjustment of Carburetor setting
It is a Pilot screw.
O-ring here is an old car and Large is crashing.
If it collapses, in the case of 4 cylinders etc. with Rose comes out, each Screw can not grasp the exact return rotation and it may suck the air
We exchanged at the time of cleaning together with Washer.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
The TMR-MJN32 carburetor in drip petrol, Insufficient investigation of O-ring Float Chamber of seal Specifications consistent with the original parts, quality is also very good, after the replacement is no longer leaking gasoline.
The TMR-MJN32 carburetor in drip petrol, Insufficient investigation of O-ring Float Chamber of seal Specifications consistent with the original parts, quality is also very good, after the replacement is no longer leaking gasoline. View detail
Jet is always manufactured by the same Manufacturer
I purchased TMR because it attached a favorite car.
Even if Jet is a bit high, it is always made by Manufacturer (MIKUNI - Let's make it to KEIHIN). As Jet is a precision part, setting it cheaply, etc. will result in incorrect setting, there is a case that it is addicted to uselessly.
MIKUNI - If it is made by KEIHIN, you can see that it is genuine as Mark is written in Jet.
Coco is handled because it deals with genuine items and can be purchased with Single Body.
View detail
To Carburetor setting
I bought it for Carburetor setting. I will be very saved because the fine Size also arrives with short delivery time. There is no problem with regard to quality. It seems good to keep each SizeStock. View detail
OEMcarburetorOH
Yamaha can not purchase Single Item even if it is the same Mikuni's carburetor, it is expensive if there is one, SEA BASS can purchase Single Item and it is cheap price is famous story. There are also other shopping stuff, and it is purchased with Webike
There is handling of small parts and it is saved.
View detail
Is not it a little expensive?
I bought it for setting of TMR, but since it is 4 cylinder, it will be purchased with 4 sets as a matter of course, but with Set purchase there is absolutely no discount?
And it is too bad that Mikuni's Jet is about 30% higher than KEIHIN.
View detail
Setting
I bought it for Carburetor setting with DRZ400SM
Since it is YOSHIMURATMR, it should have been set already, but since it does not come nicely, I am doing it myself after all
It is troublesome to disassemble every time it is changed, but I feel challenging to do as soon as the engine is in good condition
If you do not purchase ManufacturerOEM Product, you may get lost from tolerance etc, so I use Jet of the same Manufacturer for Setting
View detail
When equipping XLR80 (an APE and XR MOTARD) with TMR, it purchased in order to use a NORMAL Air-cleaner VOX.As for the Spigot, YOSHIMURA TM-MJN and the Air-cleaner side Connecting tube for the APEs of CR-mini cut a tip by the object for Mukawa PE28,
When equipping XLR80 (an APE and XR MOTARD) with TMR, it purchased in order to use a NORMAL Air-cleaner VOX.As for the Spigot, YOSHIMURA TM-MJN and the
Air-cleaner side Connecting tube for the APEs of CR-mini cut a tip by the object for Mukawa PE28, as for the Manifold for YOSHIMURA NSF
.If the Chalk of
TMR is removed, it will fit in exactly.The
K&N Filter adapter itself is a 45-mm diameter, and it can use Filters, such as TM-MJN.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
[Webike Monitor] Since a little Gasoline blots were discovered from the Drain bolt when the carburetor was cleaned, it exchanged. It is kind that it can purchase per one also with such small parts. It exchanged to all carburetors for the time
[Webike Monitor] Since a little Gasoline blots were discovered from the Drain bolt when the
carburetor was cleaned, it exchanged.
It is kind that it can purchase per one also with such small parts.
It exchanged to all carburetors for the time being.
View detail
Since the Gasoline leak was carried out for a while, it purchases immediately.If it begins to leak since Packings deteriorate, it will not stop.Is periodical exchange required?A little price of quantity is and I feel like for it.
Since the Gasoline leak was carried out for a while, it purchases immediately.If it begins to leak since Packings deteriorate, it will not stop.Is periodical exchange required?A little price of quantity is and I feel like for it. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
TZR250 It was used by three MA. Although it thought that O rings, such as a product made from a Straight, would be used at the beginning of , since it discovered here, it purchased. I consider [ that it is difficult to be crushed and
TZR250 It was used by three MA.
Although it thought that O rings, such as a product made from a Straight, would be used at the beginning of
, since it discovered here, it purchased.
I consider [ that it is difficult to be crushed and to measure a size in many cases and ] a used O ring.
After becoming a Trouble in the future only wants to avoid using the O ring of a suitable Size.
View detail
[Webike Monitor] It purchased to OH of the TM carburetor. Although he thought that it was that for which a book has been bound since the price cost 1 or about 600 yen, goods Delivered were printed on free A4 copy paper. (It is a St
[Webike Monitor] It purchased to OH of the
TM carburetor.
Although he thought that it was that for which a book has been bound since the
price cost 1 or about 600 yen, goods
Delivered were printed on free A4 copy paper.
(It is a Stapler stop.)
It is regrettable if honest comment are said.
Is it a Level which may be attached for the addition which purchased
OH Kit?
View detail