Reviews
It is a must for older Motorcycles.
For older Motorcycles, it is a must.
The easy installation and low price are highly appreciated.
View detail
It is a must for older Motorcycles.
The device was installed on a KDX250SR.
Since it is an old Motorcycle, it is ideal for Tank's Rust defense.
View detail
Changed from negative pressure type to forced open/close type
[How is it used?
It was diverted to YamahaCHAPPY's Fuel Cock.
CHAPPY, as usual, uses the infamous Yamaha negative pressure cook.
Gasoline seeps out as soon as the packing is renewed, and even if it is turned on, it is not completely prevented, and it flows a little bit.
This time there was a fuel leak, and Packing does not have a part number, and those that do are very expensive, so we decided to use a forced-open/close type.
Was the one you received as per Image?
Photo
3-WAY Type with Reserve.
Was the installation difficult?
The Cook is located where it can be easily accessed from the outside, so replacement is easy.
This product has a screw cut out, but the body side also has a screw cut out, so if you are confident that you will never return to OEM, you can make the body side a penetrating hole.
Connect the Hose as described in the Instruction Manual, fasten the Clip, and you are done.
How was your experience with it?
It has only been installed for a short period of time, but it is working fine.
There is no lack of flow or oozing.
Cook can be opened and closed lightly.
[Included Parts:were they on?
This product only.
Hose and hose clipetc. should be prepared separately.
[Was there anything that disappointed you?
Not particularly
If I had to say so, I thought it would be easier to handle if the OUT side also had a Left exit.
【Review】
Cook OEM Parts (Packing) was higher than I expected and I was wondering what to do with it.
The same thing is available from various manufacturers, so frankly speaking, it does not have to be from DAYTONABrand.
View detail
periodic replacement
I installed it to prevent foreign matter from entering the tank, and it is about time for regular replacement. The price is not that much, I can see how dirty it is, and it is easy to replace, so I think it is easy to use. View detail
Feeling flow instability as per other impressions.
I use it because I often Overflow on my old car.
I'm not particularly particular about the Manufacturer, but DAYTONA seems to be well worth the price. There are no visible defects, such as paper wrinkling.
However, as mentioned in other impressions, the flow rate seems to be lower than other companies' products, and sometimes the Gasoline would run out at full throttle on the freeway scene, etc. (Waiting a bit will fix it.) Also, the Gasoline would suddenly stop running due to air bite, although the cause was unknown (I'm not sure if this was due to the Direct product, but removing the filter would fix it). (I don't know if this was due to the Direct product, but it was fixed by removing the filter.)
Therefore, it is not very useful for 250ccSports type motorbike.
I will look for a product with a higher flow rate.
View detail
Essential equipment for older vehicles
After riding for a long time, the cold temperature difference causes condensation inside the Tank, resulting in water droplets.
Water will collect on the bottom of the Tank and may rust.
Rust debris can enter the carburetor, causing overflow and clogging of the jets.
This is where this product is useful.
If there is some rust, the filter can trap it, and since it is visible through the filter, it is possible to notice rust as soon as possible and take measures such as rust removal.
This product is compatible with φ6 and 8 and can be used from Mini bike to Large type.
View detail
Since the new carburetor was of this inner diameter.
The new carburetor hose was this large size, so it is well made and the price is reasonable. View detail
กรองน้ำมันเบนซิล อันนีแยะนำครับใส่ได้ทุกรุ่น ควรจะใส่ View detail
สินค้าและการจัดส่งดี ไม่ผิดหวังที่ใช้บริการ View detail
กรองน้ำมันใช้งานดีครับมองเห็นชัดเจนใช้งานได้ทุกรุ่น View detail
สวยงามตรงปก จัดส่งตรงเวลา View detail
Cospar good
It is practical because you will not notice the Rust in the Tank going into the carburetor. View detail
สิ้นค้าดี มีคุณภาพ ส่งไว View detail
Classic look, I think the quality is good
Installed on Yamaha SR500.
Fuel Cock before replacement (Manufacturer unknown Other Brand Product) worked hard for about 15 years, but when I rode it for a while, it started leaking.
This time, we chose this Fuel Cock, which is handled by DAYTONA and has high reliability.
The look is classic, the lever operation is very light, and the installation was fairly normal.
I can recommend it
View detail
Small Type
Small type as a fuel fliter, and since it is a paper base, it is the one that you should be most careful about in terms of narrowing down the flow rate.
However, because it is a Small Type, there are many cases that are convenient for placement.
View detail
Fuel Cock
This is an essential part in the SUPER CUB carburetor replacement. Leakage occurred after 5 years from the last cook we used. We were able to purchase a Cook with the same function and it was a great help. View detail
Fuel Filter With Paper Filter
About quality and texture The product fits well with the internal diameter of 6mm hose About the feeling of use Gasoline is being delivered to the carburetor well Products to buy together 6mm hose Difficulty of installation easy, simple Cost performance and comparison with other products Among the fuel filters, the price and product were the best for me, and I was satisfied when I installed it About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing My ape100 is now an old bike, so foreign substances are starting to come out of the tank I saw small foreign substances while setting up the carburetor, so I installed them View detail
DAYTONAFuel Cock
I am satisfied with this necessity when replacing carburetor in CUB. View detail
For supplementary study
I replaced the Fuel Hose on my CB because it was hardening and coming off easily. It is also available in various lengths and can be used in various ways. View detail
power generator
Used on an old generator, the new Daiwa EG650 Mytee Power. I really wanted a different O.D. size (5.5mm) on the opposite side of the 8mm O.D. because I could not find an OEM Fuel Cock, but it works fine and I am satisfied. View detail