Reviews
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
Installed at the same time as MC41 Bore Up Kit
Clutch feels the same as it did in NORMAL. I'm sure it's not slipping anymore, but... View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
Reinforced Clutch Spring
I have changed the spring as well as the slipper clutch, and the clutch is not as heavy as I thought it would be, but it is a little heavier than the normal clutch. View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
Give a better clutch feel at the lever
About quality and texture, I can confirm that the quality is great and that the material used is an oil tempered steel wire with uniform mechanical properties.About the feeling of use, This reinforced clutch spring kit gives a better clutch feel at the lever then the original Grom clutch springs with zero chance of any clutch slippage, even with the 181cc 4 valve head big bore kit.Products to buy together, Adding a Takegawa slipper clutch kit to your cart would be ideal to also upgrade the features of your clutch pack. Difficulty of installation, I can say the fitment of the reinforced clutch spring kit for my installation was very easy once access is obtained due to the simple nature of removing and installing the retainer plate that holds the clutch sptings in place.Cost performance and comparison with other products, The pricing of this product is good. You receive 30% stronger then original clutch springs that can be installed from 10% to 30% intervals. Cheaper options are available if you are not set on Takegawa products.About shipping and packaging My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
I haven't put it on yet.
With high hopes!
I am considering a 20% increase based on yours.
View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
Everyone's.
I haven't put it on yet, but I would like to use your opinion to make it 20% up. View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
clutch reinforcement spring
It was successfully installed, but there is no long-distance test yet. The reason is that a 305CC cylinder expansion kit was installed. I bought it together with the screw set for fear of slippage of the clutch, which is very expensive. Successfully installed, but not yet long-distance test, the reason is the addition of 305CC expansion kit, fear of clutch slippage to buy together with that screw set, very expensive. View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
If you can forgive Demerit, the cost is good.
Because there was a thing to open the Clutch cover in another matter in 14-year-old MC41 CBR250RSecond Type Model, I bought it in order to install it incidentally.
The Package comes with Instruction Manual and Takekawa's Sticker.
I think the quality of the product is high, the treatment of the seat of the spring is beautiful, and there is no Rose in the length of each spring.
The installation of the Spring itself is easy because it is only replaced with the OEMSpring, but it is troublesome to open the Clutch cover by removing the OIL and LLC before Accessing it.
The only thing to keep in mind when installing is to follow the basic instructions such as keeping the fastening torque, tightening in diagonal lines several times, etc.
The Clutch is 25% stiffer than the OEMSpring, which makes it slightly heavier than the OEMSpring.
However, when the Clutch is operated quickly with a short stroke, the reaction force is strong and it is decided quickly and comfortably.
I think it will be a very good fee ring if you run Winding or Circuit, but on the other hand, I think Demerit will be more prominent than Merit because Clutch will be heavier for Touring or Street riding.
If you want to open the clutch cover, you can buy Clutch spring retainer from Kitamura and replace it at the same time, you can reduce the weight of the clutch because you can change the pre-road of the spring. It is good to reduce the weight of the clutch a little.
View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
Reinforced Clutch Spring replacement due to engine power up
What made you decide to buy?
I bought this to install the Slipper clutch kit and to eliminate the clutch slipping when the engine is powered up.
How was your experience with it?
I replaced 6 clutches which is about 30% up from Standard Clutch Spring. The weight of the clutch is the same as the previous Reinforcement Type, if you replace from OEM The weight of the clutch is the same as the previous Reinforcement Type, it will feel a little heavier if you replace the OEM clutch. The weight is the same as the previous Reinforcement Type.
[Was there anything that disappointed you?
None in particular
Do you have any wishes or improvements you would like to make for the Manufacturer?
Laser engraving of the manufacturer's name on the spring and the rest, if it were a little cheaper:・・・・
[Do you have any products to compare it to?
The Reinforced Clutch Spring from another company that was installed until now.
[Was the Instruction Manual easy to understand?
The instruction manual is very easy to understand for beginners.
【Please tell me the installation point and hang】
I learned this when I installed the Reinforced Clutch Spring made by another company before, but when I replaced it with the Reinforced Clutch Spring, it was difficult to distinguish the Spring from the OEM Spring. This time, based on the previous lesson, I prepared the Reinforced Clutch Spring by marking it with WhiteMagic before the work. At least, if there is Laser engraving of the manufacturer's name on the Spring, I would be happy! I think.
When tightening the clutch lifter plate of the Slipper clutch kit, it is important to tighten it evenly as described in the instruction manual. If you are not in a hurry and work carefully, it will not be damaged even if you have 6 Reinforcement Springs installed. After tightening the bolts to the end, use the torque wrench to tighten the bolts to the specified torque.
[Others]
If you have just changed the engine oil, you can work on the bike on the left side without draining the oil. If you have just changed the engine oil, you can work on the left side of the bike without draining the oil. When you tip the bike over, make sure to cover the bike with a rug so that it doesn't get damaged! It is. I'm working on a scrap tire. The advantage of laying the bike down is that you don't have to drain the oil and the work becomes flat and easy, but you have to be careful not to drop the bolts and small parts by mistake because there are many holes in the crankcase. The disadvantage of this kit is that if you drop the bolt or small parts into the crank case by mistake, you will have to take down the engine and have a big operation to split the lower back. If you replace the clutch spring set with the slipper clutch kit, you don't need to buy R.Crankcase cover gasket separately, but if you replace the clutch spring set only, you need R.Crankcase cover gasket separately.
View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
Just as they say!
It eliminates the slippage of the Clutch due to summer heat dripping and transmits enough Engine output
With the Reinforcement Type Clutch Spring, which increases about 20-30% When used in combination with normal spring, it is possible to match the EngineSpec The weight of the Clutch lever operation can be adjusted By the way, I used four SPTakegawa and STDQuantity:2pc. With the set, I made it 20% up In combination with "Kachachiri-kun", Clutch is decided with Small-ishly Chicachi If you're confident in your grip, 30% is fine
I gave it a 3 because the mounting is not pontooned
View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
Very satisfying Parts
This is an Engine that has been bored up to 143cc
They've asked for a 20 percent enhancement
I changed four spring models
At first I was a little bit nervous about the clutch meat
It's a matter of getting used to it It hardly feels heavy ^^^
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
For Circuit driving.
Using Repeat
I am using it for Circuit driving.
The slippage is reduced and immediately after change, the difference will come out at Start. A wonderful connection of Clutch will be better.
Will not it feel a little after a while, the difference is difficult to understand.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
Excellent for COSPA
I changed it for Clutch exchange and use it for Circuit.
The attraction of the most Large is cheaper than other companies. The effect is confusing because it is simultaneous with Clutch exchange, the connection is getting better.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
Reinforced Clutch Spring
I bought it because I want to Willy at CRF 250L. CRF 250L was originally because Clutch was extremely light, so even if you put Reinforced Spring "Clutch is heavy and I do not want to ride!" It is rather a still lighter category. Willy is the key, but still can not do it at all. Lol View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
POSITIVE CLUTCH ENGAGEMENT
The Takegawa Reinforced Clutch Spring Set shore gives positive clutch engagement. I installed all 6 Takegawa Springs to get 30% more grip on the clutch plates of my GROM (standard / stock power output) and I think I only need 10% (2 springs) or 15% (3 springs) for my GROMS power output. I will easily remove 3 springs next time I clean my oil filter during an oil change. This is why I chose Takegawa Reinforced Clutch Springs so I can "dial in" the amount of clutch "feel" I require (when I install my 181cc kit). When installing your Takegawa Clutch Springs, don't forget to use a criss cross pattern when removing and tentioning the springs. The Clutch Springs come with a visually easy to understand instructions. And as usual the instructions have correct bolt tention data / spec's. View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
The springs are really strong. I accidentally broke one part while installing the slipper clutch and had to order it again. It is a performance that cannot be compared with a genuine spring, and it is common to lose power due to the clutch sluggish while
The springs are really strong. I accidentally broke one part while installing the slipper clutch and had to order it again. It is a performance that cannot be compared with a genuine spring, and it is common to lose power due to the clutch sluggish while shifting gears, but that is significantly improved. I'm satisfied. Spring is really solid. While it equipped with a slipper clutch to accidentally damage any parts was about to order again. If the clutch is a genuine spring and during the performance bar yigoyo, gear shifting without losing the incomparable scooping output slugs heunhande it will be improved remarkably. I'm satisfied. (Google Translation) View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
SPTakegawa Reinforced Clutch Spring
I bought it because it was written that Clutch may slip as OEM Product in the manual of SPTakegawa 's Power Up Kit.
The photo is the removed OEM Product.
Compared to OEM Product, it is hard and the total length seems to be short.
The feeling of Clutch gets a little heavier and feels like it can cut with a short Stroke.
Although it is not so painful that it is heavy, I feel that this is better as I feel the sense of on and off.
Clutch does not seem slippery.
Since it does not run with OEM Product after introducing Kit, it will not be compared - - -.
View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
Grom Clutch Kit seems to come out ... High!
rest assured…
It is a feeling of operation that does not feel exchanged, but there is no anxiety dissatisfaction such as? if it did not have to be exchanged ... because it is the product of the SP Bugle SP Budoku Brand.
Moreover, feeling of security and satisfaction that strengthened, replaced. Even without having to focus on the Engine, I feel that it is a price, time and labor that I can exchange with upfront investment.
View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
Oil FilterRotor
I tried incorporating 30% Up thing
It got heavier than I expected.
It is the same level as the Large type Motorcycle or slightly light Level.
Those who would like to ride lightly on the high street in High Camshaft
20% Up may be exactly right.
Of course it is only Spring
There is no change in the clutch's run and operation feeling.
You can operate in the same way as before change.
View detail
Fits: KAWASAKI KLX110, KAWASAKI KSR110
It exchanged for the occasion which carried out bore up. I think that it became six from four and became the clutch work made into the snap. It becomes hot that some difficulties become heavy and a clutch grasps them.
It exchanged for the occasion which carried out bore up.
I think that it became six from four and became the clutch work made into the snap.
It becomes hot that some difficulties become heavy and a clutch grasps them.
View detail