Reviews
Fits: HONDA CB 750 K FOUR , HONDA CB 750 F SUPER SPORT
Listed for 530 Chain, but it was for 630 Chain.
I have accepted the return of a part that was incorrectly labeled by your company as unusable, but I still haven't even received a call from you! View detail
Fits: SUZUKI GSX-R1000, KAWASAKI GPZ600R, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1FAZER, YAMAHA FZ1FAZER, YAMAHA FZ6-N, YAMAHA FZ6-S2FAZER, YAMAHA FZ6-SFAZER, YAMAHA FZS1000 FAZER, YAMAHA MT-01, YAMAHA XJR1300, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R7
Gsx-r1000 17 to 21 years old is not hooked up to the Gsx-r1000!
Gsx-r1000 17 to 21 years old is not hooked up to the Gsx-r1000!
Correct the fit.
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NS50F, HONDA MBX50, HONDA CRM50, HONDA CRM80, HONDA MONKEY, HONDA GORILLA, HONDA Monkey Baja, HONDA MONKEY R, HONDA MONKEY RT, HONDA DAX50, HONDA DAX70, HONDA JAZZ, HONDA MAGNA50, HONDA CHALY 50
Did not fit.
The conformity information is incorrect. I was disappointed because I purchased it on faith. View detail
![VXSeriesChain 530VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/73326/0517_530VX3_G&G_P_togo_TS.jpg)
Fits: HONDA CRF1100L(Africa Twin), HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100, KAWASAKI Z750B, KAWASAKI Z400FX, KAWASAKI Z400GP, KAWASAKI Z550FX, KAWASAKI Z400FX, KAWASAKI W1, KAWASAKI W1SA, KAWASAKI W3, KAWASAKI Z250FT, KAWASAKI VULCAN800 DRIFTER, KAWASAKI VULCAN800 CLASSIC, KAWASAKI Ninja ZX-9R, KAWASAKI VULCAN800, KAWASAKI Ninja ZX-9R
(Caution) LINKs are not enough for the model that is compatible with the product.
I made arrangements after confirming the model of the car to which it was compatible.
It was 2 LINKs short.
I'm sorry I didn't check the current Piece count properly.
Very disappointing
The following were listed as compatible models, but in reality they were 100 LINKs.
• Z550FX
? Year:80-82
Number of links on the OEM 98
I have wasted Gold, so I will give this rating.
View detail
Fits: DUCATI MONSTER 900, DUCATI STREETFIGHTER V2, DUCATI MULTISTRADA 1200 DVT S, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT ENDURO, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V2 S, DUCATI MULTISTRADA 1200 S, DUCATI MULTISTRADA 1200, DUCATI MULTISTRADA 950 S, DUCATI MULTISTRADA 950, DUCATI HYPERMOTARD 1100 EVO SP, DUCATI HYPERMOTARD 1100 EVO, DUCATI HYPERMOTARD 1100 S, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 939 SP, DUCATI HYPERMOTARD 821 SP, DUCATI XDIAVEL S
I received an item that did not look like the picture.
Note that you will receive a design that is completely different from the image!
Bolt came with only DBK written on it.
WeBig, manage your Page properly.
Too many items are in stock when there are no items in stock or anything like that, and too many other miscellaneous things!
View detail
![[Repair Parts] Clutch Assembly](https://img.webike-cdn.net/catalogue/images/88698/03132252_5c890b0507d02_TS.jpg)
Fits: YAMAHA FORCE 155, YAMAHA SMAX, YAMAHA Majesty S
Don't buy it.
Bought this to replace a worn out clutch. 39mm nut can be replaced even if you can't loosen it with the integrated Driven! And it's cheap! It was a mistake to choose it with such an idea.
When I checked that it was assembled properly and turned the rear tire a little, I heard a strange noise like "PelePera". After turning it a little and reassembling, the noise did not occur, but it sounded depending on the phase of the driven.
And when I actually used it, I was impressed that the clutch connected at about 3000 rpm immediately after assembly and the sharpness of starting was restored, but after only 40 km of driving, an abnormality occurred. However, after only 40 km of driving, the start became sluggish to the same extent as the worn-out condition. (RPM at this time:6000 rpm)
I had no choice but to keep driving the car, and the connection got better again, which is not so clear, but when I drove the car more, I heard a strange noise like a skirring sound at the start. When this happens, no matter how carefully I try to connect the clutch, the clutch slips and the starting becomes incredibly slow. After riding for a while, the sound was gone, but the car started back to the same nippy start as before the replacement. I had not even driven 1000 km so far.
At the end of the day, the car hit the GuardRail foundation during a sudden stop while controlling a slow start and was almost scrapped. Although my driving was the main cause, I cannot deny that this Part was a remote cause.
It should be replaced with OEMClutch with the proper tools.
View detail
The parts are different.
I purchased this part for my KYMCO Agility 125, but it was a HondaDIOSeries part.
I chose the right model, but the shape was different.
Webike has the wrong model of car for which it is compatible.
View detail
![Rear Sprocket [Drive Sprocket]](https://img.webike-cdn.net/catalogue/images/16991/y23_TS.jpg)
Fits: SUZUKI GSX-R1000, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R25, YAMAHA YZF-R3
Not compatible with YZF-R1 15-.
YZF-R1 Year:98-21, but not compatible with 2017. Probably not compatible from 15 years.
It is a strange conformity notation if you think about it, but I bought it without realizing it.
To begin with, the YZF-R1 (2015-) is a 5-hole, but this product is a 6-hole.
Please be aware that if you are from 2015 or later.
View detail
It's almost like a strange noise.
The product compatibility was also confirmed by PRO's engineer and installed.
After the installation, I got on the Motorcycle,
It is, it is a strange noise that goes beyond the Engine sound.
Gyuin.
There is no next time.
View detail
Don't buy it.
I bought a DID 530VX3 to Crimp an existing Chain to replace the Chain, but the Crimp pin broke off and I could not Crimp it.
I managed to cut the chain by using Leutor to drop the crimp at the end of the chain and then cut it, but it seemed to break.
It was not of the least use and dumped the Gold down the drain.
I bought a similar Tool from Amazon for about 3,000 yen because the parts seemed to be usable, and it broke the same way, so I assume the contents are the same.
I ended up buying DID's Kashimaru-kun and did the Crimp, which is an OEM-specified product, and was able to do the Crimp easily and without any danger at all.
View detail
Fits: HONDA CRF250M, HONDA CRM250R, HONDA XR250R, HONDA CRF250RALLY, HONDA CRF250L, HONDA XR650L, HONDA XR600R
not conforming
I purchased this bolt to install on my MotorcycleXR250R (me08) 1998, but the bolt seat is not taper and the bolt hole diameter is for M10. I have been waiting for the return and exchange, but I have not heard anything from them. I have not been able to contact the company to inquire about the return. I tried to enter my vehicle information when I purchased the product, but I could not enter the year of my XR250R. I thought it was an ALL MODEL model, so I purchased it. View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R1, YAMAHA XJR1300, YAMAHA MT-01, YAMAHA FZ1 FAZER, YAMAHA FZ1 FAZER, SUZUKI GSX-R1000, YAMAHA FZ6-S, YAMAHA FZ6-S FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZ6, YAMAHA FZ6-N
Unsatisfied with the color
Other manufacturers did not have Steel as an option, and even if they did, the price was more than twice as high, so I ordered this one.
I kept looking forward to it, waited for 3 months, and finally the product arrived.
I wanted the iron-colored Silver, but what I received was Black.
Some lots may be Black." But it's fatal to leave the color to chance when you're choosing it for custom as well.
Maybe flush or poach without mounting.
I haven't used it, so I don't know how it's used.
View detail
first thing in the past
Both Driven Sprocket and Chain were replaced with new ones, but they are unevenly worn after about 4000 km. I will replace it because it is dangerous any more, but I can't think of a Sprocket of the same Cycle as the Tire. It is better not to do it. View detail
OEM and Size are different so they don't fit. Defective?
With the right tools in place, installation was a breeze.
However, the dimensions seem to be a little different from the OEM and the Belt does not fit tightly.
Pulley surface has play and wobbles even when fixed
Quantity when riding for a few days to see how it goes.:The reinforced belt I bought in a set was torn to shreds when the drumstick snapped….
I returned it to OEM and it was just past the return period.
It became just Garbage.
View detail
Fits: DUCATI F3, HONDA CB350, HONDA CB360, HONDA CB400LC, HONDA CB400FOUR (air-cooled), HONDA CJ250T, HONDA CJ360T, HONDA CB400 SUPERHAWKIII CB400D, HONDA CB400T CB250N, HONDA CB400TII CB400T, HONDA CB400 SUPERHAWKIII CB400N, KAWASAKI 350SS MACHII (S2), KAWASAKI 350SS MACHII (S2), KAWASAKI 400SS MACHII (S3), KAWASAKI 500SS MACHIII (H1), KAWASAKI KH400, KAWASAKI KH500, KAWASAKI Z250 A1-4/B1 (78 - 80), KAWASAKI Z250 C1/2 G1/2 LTD, KAWASAKI Z250FT
Too bad …
I bought it because it was listed as compatible from MyMotorcycle registration, but the 104L was incorrect, the official version was 106L.
I placed the order again, but this Chain will be stocked for the opportunity to change the reduction ratio in the future, but I was very disappointed that it could not be completed that day!
View detail
This item could not be installed.
I don't know why the manufacturer has a setting. View detail
fall (e.g. in status)
Slip. I thought it was an initial slip, but it slides.
And a familiar Motorcycle shop. I'm going to ski DAYTONA. I would recommend OEM because OEMMEMBelt is expensive but you don't have to buy cheap.
View detail
Fits: YAMAHA BirdCity125 , YAMAHA BWS125, YAMAHA CYGNUS125
Not for CYGNUS, the splines are different in diameter and cannot be installed.
Not for CYGNUS, the splines are different in diameter and cannot be installed. View detail
![SUPER Non-seal Chain 428NZ Gold & Black [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/images/8031/428NZ_TS.jpg)
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX200, KAWASAKI KMX125, KAWASAKI KLX125, KAWASAKI KE125, KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI D Tracker 125, KAWASAKI AR125S, KAWASAKI AR125
The LINK number notation is wrong. I bought it on faith and lost money.
Both Web!ke and Manufacturer's DID say CT125 incorrectly. (118Piece) I bought it believing the description and tried to exchange it, but it was too long and I could not fit it. I bought it believing the description and when I tried to exchange it, it was too long and I could not install it. I wish I could get my Gold back. Since I could not exchange it, I do not know the performance or durability. I am sorry, but I have to give it one star.
The notation of 118Piece for CT125 is a lie. Is the true OEMPiece number 108? Let's all not be fooled, I hope both Web!ke and Manufacturer will correct this soon.
View detail
Fits: YAMAHA BWS100(BWS), YAMAHA GRAND AXIS, YAMAHA AEROX100
Oh no!
Overheat immediately after replacement and Engine stops and seizes? It was immediately returned to OEM and runs fine. View detail