Reviews
Fits: Others
Power supply for PanasonicGORILLA
I don't mean to brag, but Motorcycle is Polishing Specialty The length of the Chain cannot be adjusted in
The installation work was done by a Motorcycle shop that we are familiar with.
The installation fee Gold is included in the X-ADV used car delivery and maintenance fee Gold, so the details are unknown.
The USB port is designed to be waterproof, but the plug port is facing down to prevent rain.
I have only used it once, but I have a feeling that Large will be very active in the future.
The cell phone Navigation is inconvenient for some reasons, such as signal loss in mountainous areas. We do not use it because of the high communication charges.
I use a PanasonicGORILLA which I also use with my own car. (VWGolf's Navigation has little information and does not show Costco. (VWGolf's Navigation is not very informative and does not show Costco, and the other information is also very poor.)
View detail
Fits: Others
For Touring
I don't know how difficult it is because it was installed at the shop when I took delivery of my car.
This is also an OEM Product, but this one is slimmer and looks better, so we installed it.
The appearance of the product looks and feels better than the OEM product.
View detail
Fits: Others
The Connector part is Compact, but the Body box is in the way.
As a result of changing Navigation from 5-inches to 7Inch, when connecting Navigation power to the USBConnector on the BOLT Shoulder Bag
It became difficult to do, so I thought it would be a good opportunity to replace it with this product, which is 2.4A compatible.
As mentioned in the Title, the Connector is compact and unobtrusive, but the Body (transformer from 12V to 5V?) is not. However, the Body (transformer from 12V to 5V?) is
I was worried about the mounting position because it is bulky.
Finally, it is fixed with Double-sided Tape on the Front side of the Top Bridge, which is hidden by the Bullet Cowl.
Red wiring is very noticeable as it is, so the Bullet Terminal is cut out and soldered on.
Spiral Tube and Wiring Cover were used to prevent the Red color from being seen.
The Connectors placed on the Handlebar are Compact and unobtrusive, so they look good when not in use.
View detail
DAYTONAusb power supply& voltmeter
Since I ride a Motorcycle with Touring as my main vehicle, a voltmeter is very useful for battery management.
The usb power supply is really useful when touring.
DAYTONA products are reliable and satisfactory.
View detail
USB Socket plugged in...
I think the slide style cap is great in terms of both gimmick and operation. However, since the SocketBody and the middle box are of a certain size, I could not pass through the small space around the Handlebar to hide the Wiring, and I had no desire to make it all Rose, so I ended up compromising. In this respect, it might be better to have an intermediate connector like other manufacturers, but it might cause contact failure, so it is a win-win situation.
The included parts are sufficient for most motorcycles, but a plain type terminal would have been a nice addition.
Test after installation is completed (using Anker USB Cable) After repeated unplugging and plugging several times, we were able to confirm that the device was energized. There was a feeling of being stuck until the device was energized, so there may have been something wrong with the molding of the USB Socket.
In any case, we are satisfied that the system is currently fully operational.
View detail
Necessary for extending power lines!
This wire is needed for the power line for DAYTONA's Radar to be a direct out instead of USB.
The KITACO power supply extraction unit is placed under the Rear Sets and wires are extended from there to the Front.
Wiring is a hassle, but once it's on, it's perfect!
View detail
Fits: Others
For phone charging +α.
[How is it used?
For securing power supply for smartphones and Cameraetc., which are now necessities.
I purchased the 2-port Type this time because I had previously installed 1 port of the same Type in another car model and found it very convenient.
The Grip heater was installed in the previous car model with a separate system, so we only needed to secure the power supply for the smartphone, but for this car model, we wanted to install a Grip heater of the wrap-around type that can be easily detached with a USB power supply, so we chose the 2-port I chose the 2-port type for the Grip heater and smartphone charging.
Was the one you received as per Image?
It is a Type that attaches to a Handlebar and is a Simple & RefreshingDesign that is compatible with both 22.2mmSize Handlebars and 25.4mmSize Handlebars, and is just like Image.
Was the installation difficult?
It is not too difficult because the Instruction Manual describes how to take out the power supply in several Patterns.
If you are not good with electrical systems, it is better to request a trusted friend or Shop.
How was your experience with it?
It is also able to charge my phone, and it functions properly when I charge the battery of my ActionCamera or use the electric pump (for Tire's Inflator) on the go, so the Large change is very useful.
[Included Parts:were they on?
It includes USB power supplyBodyBody, two RubberSpacer, Extension Harness, Branch Harness, Connector for wiring, and two Tie Bands, so it can be installed with only this product if you have a Large Mortgage Motorcycle. This product alone should be sufficient for installation on most large motorcycles.
[Was there anything that disappointed you?
None so far, how durable is the Rubber cap? I am curious.
0Other items that may be useful include
Point and hang of installation
Since it is a universal product, the waterproof cover (rubber lid) may not be able to be installed in the desired position depending on the treatment of excess wiring or the conditions around the handlebar depending on the type of car.
Let's devise and modify it well and install it in an easy-to-use position.
[Availability and clarity of the Instruction Manual
A simple but thorough Instruction Manual is included in the package. If you cannot understand it, do not hesitate to ask a friend who is good at electrics or a shop.
[Notes]
As mentioned above, do not force yourself to work on something you do not understand, or you may cause an unexpected trouble with the electrical system.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I am concerned about the durability of the rubber cap for waterproof. I think it would be even better if you could devise another way or sell the rubber cap as repair parts.
View detail
OEM-like.
It was easy to attach without any processing required.
It looks and feels like it could be in an OEM.
View detail
I like that you can choose the number of Cigar sockets and USB in the Series.
A long time ago, the power source for additional electrical appliances for cars and motorcycles was mainly a cigar socket,
Recently I have been using more and more USBs, so I bought this product which allows me to do Wiring at once and use both at the same time.
For products that have been used for a long time or for products that require a constant power supply (e.g., a digital camera), we use a cigar socket. Cigar sockets that are left attached are reinforced with Vinyl Tape to prevent them from falling out.
(*When I installed it, I was in a daze and wired the + and − of the battery as per the instruction manual, and made the rudimentary mistake of turning up the battery while the power to the camera was still on. Please be careful.)
Each Wiring Cord is made long, so it is convenient to distribute the installation location. On the other hand, it is necessary to hide the excess cord when it is left over.
In the case of this product, there are a total of three connectors, but of course the total power consumption must be taken into consideration, so care should be taken not to use unnecessarily high power products. For this reason, if possible, it may be a good idea to always have a spare Fuse (MINIGlassTube Fuse 5A) on hand for touring. I wrote this as a reminder to myself.
View detail
A must for anyone who does Smartphone Navigation.
I had it installed at Shop before delivery.
I use my phone as Navigation and it is very useful.
I bought and use a short charging Cable of about 20 cm, and I recommend that you prepare it separately for your convenience.
In this day and age, I really want USB power supply to be a Standard Equipment for Motorcycle (laugh).
View detail
The lid can be conveniently closed with One push even while Gloved!
It is convenient to open and close the lid with one-touch while wearing thick gloves! View detail
Separate handle car may be hard
I bought it to install on my Ninja ZX-25R, but there was no suitable space around the handlebar, so I gave up the idea of installing it.
I tried to attach it temporarily to the Multi Bar Holder, but the Unit is too big to be attached to the Handlebar.
Parenthesis bad, so I gave up completely.
However, it was a waste, so I installed it on my Ninja 250R.
The Ninja250R already had a USB power supply from another company installed, but we decided to replace it with this product.
The Ninja 250R handlebar has plenty of space to accommodate this product, so we were able to install it without any problems.
I installed it on the Left Side of the Handlebar, not sure if it will fit on the Right Side as I haven't tried it.
The installation went without problems because the ACC power supply was already branched.
No... there was one problem:the Male Bullet Terminal was already crimped, but the Bullet Terminal did not meet the standard.
I had to replace it with a Bullet Type Terminal that I have. It seems that the Smallest Bullet Terminal is used halfway.
View detail
Fits: Others
Exactly for Z900RS with a little modification
Without modification, the Mirror Holder will not fit snugly on the Mirror Holder due to interference with the Clutch.
It will be less than 2 cm away from the Mirror Holder.
If the parts on the headlight side are slightly modified as shown below, they can be attached exactly as shown in the photo.
(1) Shave off a little less than 2mm from the handlebar using a cutter file.
(2) Extend the hole where the Cable comes out downward by about 1 pc of Cable and shift the Cable downward.
I worked with Cutter, but you could melt it with a Solder iron or other heat.
The Mirror Holder looks like an OEM product when it's perfectly attached to the Mirror Holder, and it's very nice and discreet.
View detail
Fits: Others
This time, a bite of Type
We have purchased many similar USB wiring products from other manufacturers, but we chose DAYTONA this time as well. The instruction manual is easy to understand. The power supply is taken from the wire of the brake switch. The power supply is taken from the electric wire of the Brake switch.:It is also good to set the wires, but if you make a mistake, it will take a lot of time and effort to fix it. If you are a first-time user, you can use an Inspection Tester, which is sold for about 500 yen, to check the wire that is energized when the key is turned on.
The corner CUB CUSTOM has just the right amount of free space on the Left Side inside the Handlebar Cover, I put the Wiring and converter there. At first, I attached the USB to the LeftMirror with a bar for the phone and then used Included Parts:to install it. There was no particular problem, but it was noticeable, so I reattached it without using the Included Holder on the underside of the Handlebar Cover. The fixation is made with a small installation Holder made of aluminum plate and attached with a hard Magic tape. I thought it would be easier for those who do not use the attached holder if the area of the bottom of the USB port was a little wider.
It has been about a year since I installed it. I was worried about vibration etc., but I can charge my phone without any problem. I have not had any problems even when I wet it in the car wash. I open the cover when I use it and close it when not in use. I have it upside down, but it doesn't open by itself when not in use.
My CUB does a lot of strolling and choppy riding. I am glad I installed DAYTONA's USB, which is solid even when not in use.
View detail
Durability Zero
I installed it in a GSX1100S and used it for a few days, then suddenly it became inoperable. I am extremely disappointed. View detail
Standard Items indeed!
[How is it used?
I used it on my Yamaha MT-25, which I use on a daily basis.
I chose this product that can charge more than two units because I have Situation to charge my phone and Income at the same time.
Was the one you received as per Image?
Fixed Parts and Extension Cord in addition to Body in Quantity:Set
How was your experience with it?
As for the installation, it can be replaced immediately if only the Accessories power supply can be removed.
In the case of MT-25, you only need to remove the Seat, part of the Side cover, and Meter and Wiring and you are done.
Since the Fuse is located just where it is hidden by the Side cover, we fixed it without any special treatment.
When wiring, only the Plus side is too short, so we made a wiring for extension, and when we work on it, we can use it. "Hey, hey, hey, DAYTONA-san, why is only Plus so short!" I am sorry for doubting you, DAYTONA.
Then, fix the Socket to the Multi Bar and you are done.
It is now possible to charge the battery safely and conveniently and quickly.
[Points to note]
The only thing that bothered me was the waterproof cap, which is removed by pulling it out, but the stopper is too small.
I thought it was a Point in need of improvement, as it will probably crack sooner or later.
How did it compare to other products?
We considered various Chinese USB power supply and Others.
In the end, I was right to choose DaytonaBrand's product, which has two mouths and is a standard item.
【Review】
SUB charging is now possible with easy installation.
It takes up only the smallest amount of space, so there is no clutter around the Stem.
View detail
It is good to be normal.
I had to replace the one I had been using because the plastic part of the USBOutlet cracked.
I expect quality from DAYTONA products.
View detail
This is the USB Cable for the Recommendation!
If the phone is not connected to a power source and the map is displayed, the battery level will decrease as you watch.
I was concerned about the negative reviews of USB power supply products, such as weak output, inability to charge, immediate breakage, short wiring, and ha-gap, so I was hesitant, Discreet, fast-charging JapanBrand This is why we chose this product.
Since the headlight is a Bates type, we put the transformer in a light case and connected it to the wiring inside. We also found a USB cable with a small head and installed it with the Refreshing.
The phone will not be charged during Idling, but as it runs, the phone will charge more and more despite the constant Map display.
It is a mystery, but it seems that the USB charging starts when the power supply from Motorcycle increases. it works fine without any change in the brightness of the Headlight.
Cap is loose. I don't ride in the rain, so I removed the Cap and left the USB Cable connected.
View detail
Simple but stable
Since the area around the handlebar is small, we did not want to add anything too multifunctional and selected this one, which does the minimum necessary job in a simple way.
I think that the strength of this product is the sense of security of DAYTONA and the reasonable price in spite of its solid manufacturing.
Recently, Type C plugs have been introduced, but I think they can still be used for smartphones.
The power supply capacity is also perfect, and it charged my 5-year-old smartphone, whose battery was getting worn out, while simultaneously using the phone for calls and navigation.
I think the design can be used for Almighty regardless of the type of car.
View detail
Compact
Purchased because my previous New Ing USB power supply was disconnected.
Cover of the terminal is Material:I wonder how waterproof it is because it is plastic, but it looks better than Rubber cap.
The power supply is a bit large, so the installation location is a bit of a consideration...
With CROSS CUB, there is room in the body, so mounting is not so much of a problem.
The cord has a Connector, and if you place the Connector on the Battery side, you can connect DAYTONA's corresponding Charger, but it must be connected directly to the Battery.
View detail