【DAYTONA】Motorcycle Exclusive Power Supply Slender USB 2 Port 4. 8 A Review
Fits: Others
For phone charging +α.
[How is it used?
For securing power supply for smartphones and Cameraetc., which are now necessities.
I purchased the 2-port Type this time because I had previously installed 1 port of the same Type in another car model and found it very convenient.
The Grip heater was installed in the previous car model with a separate system, so we only needed to secure the power supply for the smartphone, but for this car model, we wanted to install a Grip heater of the wrap-around type that can be easily detached with a USB power supply, so we chose the 2-port I chose the 2-port type for the Grip heater and smartphone charging.
Was the one you received as per Image?
It is a Type that attaches to a Handlebar and is a Simple & RefreshingDesign that is compatible with both 22.2mmSize Handlebars and 25.4mmSize Handlebars, and is just like Image.
Was the installation difficult?
It is not too difficult because the Instruction Manual describes how to take out the power supply in several Patterns.
If you are not good with electrical systems, it is better to request a trusted friend or Shop.
How was your experience with it?
It is also able to charge my phone, and it functions properly when I charge the battery of my ActionCamera or use the electric pump (for Tire's Inflator) on the go, so the Large change is very useful.
[Included Parts:were they on?
It includes USB power supplyBodyBody, two RubberSpacer, Extension Harness, Branch Harness, Connector for wiring, and two Tie Bands, so it can be installed with only this product if you have a Large Mortgage Motorcycle. This product alone should be sufficient for installation on most large motorcycles.
[Was there anything that disappointed you?
None so far, how durable is the Rubber cap? I am curious.
0Other items that may be useful include
Point and hang of installation
Since it is a universal product, the waterproof cover (rubber lid) may not be able to be installed in the desired position depending on the treatment of excess wiring or the conditions around the handlebar depending on the type of car.
Let's devise and modify it well and install it in an easy-to-use position.
[Availability and clarity of the Instruction Manual
A simple but thorough Instruction Manual is included in the package. If you cannot understand it, do not hesitate to ask a friend who is good at electrics or a shop.
[Notes]
As mentioned above, do not force yourself to work on something you do not understand, or you may cause an unexpected trouble with the electrical system.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I am concerned about the durability of the rubber cap for waterproof. I think it would be even better if you could devise another way or sell the rubber cap as repair parts.
Responses
Other reviews
For Touring
I don't know how difficult it is because it was installed at the shop when I took delivery of my car.
This is also an OEM Product, but this one is slimmer and looks better, so we installed it.
The appearance of the product looks and feels better than the OEM product.
View detail
Exactly for Z900RS with a little modification
Without modification, the Mirror Holder will not fit snugly on the Mirror Holder due to interference with the Clutch.
It will be less than 2 cm away from the Mirror Holder.
If the parts on the headlight side are slightly modified as shown below, they can be attached exactly as shown in the photo.
(1) Shave off a little less than 2mm from the handlebar using a cutter file.
(2) Extend the hole where the Cable comes out downward by about 1 pc of Cable and shift the Cable downward.
I worked with Cutter, but you could melt it with a Solder iron or other heat.
The Mirror Holder looks like an OEM product when it's perfectly attached to the Mirror Holder, and it's very nice and discreet.
View detail
Large satisfied
It has two USB ports vertically, and its low-profile design allows it to be installed in an open space in the handlebar without any discomfort.
The product is made by DAYTONA, is well made, and is incomparable to cheap foreign-made products.
View detail
Easy to use, but only subtle Red line
It was easy to install by myself, but once I made the Wiring mistake, I could not remove it easily.
Red line is noticeable, so if it's Black, it's straight good.
View detail
Reputation is not true
Installation is as easy and convenient as its reputation.
However, since it is not a PD, it is not a super-fast charge, but if you are using Google Navigation and YouTube Music while touring, you should be able to finish the tour without depleting your phone's battery.
View detail