Reviews
Can be used as Repair Parts for CB50S!
[How is it used?
The OEMSpeedometer Cable for the CB50S broke over time and I was at my wit's end. I was informed that it was compatible with the Cable for the MAGNA50, which led me to purchase it.
How was your experience with it?
I was concerned about the length of the Cable, but it is acceptable. The shape is slightly different from the OEMCable of CB50S, but it works fine.
How did it compare to other products?
We are grateful for MAGNA50's Other Brand Product, because there are some Long Type and Mesh Type products, but there are surprisingly few OEM Type products.
[Points to note]
Cable routing is slightly longer. In my case, I installed a meter that was used on another car, and it was installed in an upward position, so it was an exact fit.
▼Meter cables will break at some point, so I appreciate the Repair Parts.
View detail
An Appreciating the use of the Tachometer on the CT125
About quality and texture: I am happy with the quality of the small DN tachometer kit from SP Takegawa. Stainless steel housing with a black instrument face, analog RPM needle and white LED backlighting. About the feeling of use: This tachometer displays so much more then just the engine speed. A compact unit that allows you to continue to use the OEM Honda speedometer. Products to buy together: The SP Takegawa engine drain bolt would also be desirable to purchase alongside the small DN tachometer kit so you are able to display the engine oil temperature from this location and should really be included in the kit. Difficulty of installation: The process to install takes about about two hours. The mounting bracket needs to be attached to the speedometer mounting point, the headlight bezel needs to be removed to access the electrical connectors, you needs to run wiring for the engine speed and temperature signals and then mount the tachometer and connect the wiring. A little difficult to do. Cost performance and comparison with other products: Good costing as you are getting a well featured and stylish design tachometer but not quite matched to the CT125 as compared to the tachometer from Daytona that is cheaper to purchase and looks better fitted to the CT125 but lacks features. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: One feature that you may like to have but it missing from this product is a gear indicator which can be had with the super multi DN meter from SP Takegawa but at a higher cost and removal of the OEM Honda speedometer. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R400, SUZUKI GSX-R1000, SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI B-KING, SUZUKI GSR750, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1100/ZX-11, KAWASAKI ZXR400, KAWASAKI ZXR250
cb400sf Progress2
Purchased as Sensor to attach Progress2 to cb400sf
The temperature was firmly detected and displayed.
Durability is still unknown.
View detail
Satisfied because I wanted a Taco Meter and a clock.
[How is it used?
Used for traveling home every weekend on my own and for Touring. Purchased because I wanted a Taco Meter and a clock.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
Voltage extraction was difficult to perform according to the Instruction Manual, so the Right Side Cover was removed.
How was your experience with it?
The Tacho Meter is very useful when shifting.
Easy to set up.
[Included Parts:were they on?
The camera came with everything, but I purchased a glossy protective film separately.
[Was there anything that disappointed you?
None in particular
View detail
Protect it just like the LCD of a smartphone.
Small scratches when wiping Meter with Gloves, which everyone has experienced.
Protects by attaching Film from the LCD, just like the LCD of a smartphone.
Depending on the reflections, Small scratches may be unusually noticeable and difficult to see.
It comes with two sheets, so it can be used for application of paste failure and spare ownership.
Since there are many sibling vehicles, the Package contains the name of another vehicle:......
But Large sturdy because of the same Meter shape.
View detail
Solidly built Bracket
The company's CompactOil Temperature Meter to Handlebar
Used for installation.
The design is good and does not look cheap.
The angle and orientation can be adjusted, so I'm glad I bought it.
I think
View detail
Installation is not difficult, just a pain in the ass!
With or without, Tachometer on CUB is purely a look
This product comes with a well-structured Installation Manual and a SettingSpec.
To installation, nothing difficult, just a hassle specific to CT125!
CT125 is around 5500 rpm, but since it is a TorquePeak, the Indicator is at 5500 rpm and the Quantity:Set
Voltmeter, max RPM display, but 5 stars if it has a clock
View detail
Perfect for the seat of Attachment
Since the division of parts cannot be temporarily fixed, installation requires hang.
USB and voltage system in this zice.
View detail
Installed as Indicator Lamp for Blinker
Relay was replaced with Blinker LEDs.
I had a Relay with an Electronic Buzzer, and although I could generally recognize the sound of operation, I could not shake off the feeling of insecurity that I was missing something.
The first requirement for product selection was "something that is not too large," so the product Size was a perfect choice.
Thanks to you, we were able to install it as per Image.
The hole size for installation is about 7.5 to 8.0mm.
Another point I dare to make.
1、Large size may be the reason for the low luminous intensity.
→Depending on the mounting point, the light is on during the daytime. (Blinking) may be difficult to confirm.
2, Wiring is short.
Wiring extension may be unavoidable, depending on the installation method.
→ The extension was done with "with Solder" + "Heat Shrink Tube" because the line was thin and I was not sure about Crimp.
Nevertheless, once installed, it does not make much of an assertion, and I am satisfied with the subtle finish.
View detail
Fits: KAWASAKI Z H2, KAWASAKI Z900, KAWASAKI Z650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Z H2, KAWASAKI Z H2 SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-10R KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja 650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 1000SX, KAWASAKI Z650, KAWASAKI VERSYS 650, KAWASAKI Z900, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4RR KRT EDITION
Protective film to protect from scratches
The presence of the protective film is not felt very much and is effective in preventing Wound. Work SuKill is expensive, so I think it is better to leave it to PRO. View detail
I added a Switch and a voltmeter for the drivetrain.
I bought this product because I didn't have a place to mount the Switch and voltmeter for the DRA RECO.
I am personally satisfied.
However, there is some BALI and it would be nice if the finishing could be carefully done.
View detail
Used for GOOSE350
Diversion of the product for GOOSE as there is no Other Brand Product for the car model.
Cable length seems to be slightly longer.
The Meter gear side is reluctant to move, so it has already been broken three times, but there are no dedicated parts, so there is nothing we can do about it!
Incidentally, Inazumaetc. made by the company can also be used.
View detail
Fits: KAWASAKI Z H2, KAWASAKI Z900, KAWASAKI Z650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Z H2, KAWASAKI Z H2 SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-10R KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja 650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 1000SX, KAWASAKI Z650, KAWASAKI VERSYS 650, KAWASAKI Z900, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4RR KRT EDITION
Visibility remains the same.
Purchased for Meter panel protection, but not much different from Meter's poor visibility.
I asked Motorcycle shop to paste it because if I fail to paste it, it will cost me extra money from the beginning again.
View detail
Fits: DUCATI Panigale V4, DUCATI Streetfighter V4, DUCATI Diavel V4
Seal to protect the Meter screen.
Seal to protect the Meter.
It's like putting it on your phone.
Scratch protection, more secure with it than without it.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
PanelProtection film was applied prior to delivery.
I bought a new car at Kawasaki Plaza, so I was able to put it on on the day of delivery in an environment free of Garbage and dust in the store.
Kawasaki Plaza was also pleasant enough to take the time before explaining the delivery of the car, and I was able to attach it with a sense of calm and peace of mind.
I was able to paste it well.
Since the size is a little smaller, place the film on the panel in advance and check the gap size around the film in the panel.
Image and then paste with Just fit.
Since the patterned paper is included in the product bag, it can be applied beautifully by gently pressing down on air pockets and the like.
I pasted the Super clear (transparent) one, but it looks like it is still OEM with nothing pasted on it, and I didn't realize it was attached.
It is a beautiful finish that I can't believe. I would eventually like to purchase one from the same Manufacture when the Panels are damaged.
View detail
DAYTONAVELONA Electric Tachometer and Balance Sensor
Tachometer Response is not good
Oil Temperature Meter is good in 0.1 degree increments
However, when installed on a Drain bolt
Because the line comes out a little from the Under Cover
Plans to change to Oil line place
View detail
Fits: HUSQVARNA Norden 901, KTM 125 DUKE, KTM 1290 SUPER DUKE R, KTM 1390 SUPER DUKE R, KTM 390 DUKE, KTM 790 Adventure, KTM 890 Adventure R Rally, KTM 890 Adventure R, KTM 990 DUKE, KTM SMT 890
Almost satisfied
[Color] Clear and Glare? (Matte look) Quantity:1 Set of 2pc. for now. [Color] The size is also good, but the end face is a little floated or a little air is coming in. It doesn't bother me that much, so it's OK. View detail
Fits: KAWASAKI Z1000 R, KAWASAKI Z1000 MK2 last model, KAWASAKI GPz750, KAWASAKI GPZ1100, KAWASAKI Z1000 R, KAWASAKI Z1000 MK2 last model, KAWASAKI GPz750, KAWASAKI GPZ1100
Slightly Bend Meter Cable
The subtle bend was just right. View detail
Parenthesis is good
I'm satisfied
Very cool.
View detail
Good product
It is smaller than I expected, but I am glad I bought it. View detail