Motorcycle Color Spacer Shims Reviews

Filter

Write a review and get Webike Points!

Reviews

K-CON

25 Mar 2024

Exclusive Aluminum Spacer for M8 Screw

Fits: Others

Japanese Webike user

5/5

The main point is that the outer diameter is larger than that of a regular collar.

I bought a battered 900SS (900SL) and am Restore.
The footpeg was made by Menani, but it was too battered, so we used parts from various manufacturers that we managed to put together to form the footpeg.
However, when I installed it, the footpeg mount on the frame side seems to be distorted only on the Right Side, and it slightly goes too far inside the vehicle body.
Left has about 5mm gap between footpeg and Swing Arm, but Right has only about 2mm...
As expected, it was too narrow, so we tried to optimize it by inserting a 3mm-thick Spacer between the footpeg and the Frame.

That is fine, but the contact area with the footpeg was small because the outer diameter of the spacer is a normal size.
I don't know what's wrong with that, but it bothered me, so I exchanged it for a Spacer with a larger outer diameter!
That is the product here.

The difference is slight.
However, those who laugh at it as slight are not qualified to talk about Tuning...so I feel good!
In fact, if you replace the Spacer only on the One Side, you will feel more like you are EXACTLY doing it.
I don't see anyone doing that.
The increased contact area should have increased the rigidity of the installation, but nothing can be felt.
Well, it's OK because it's self-satisfying.

The performance of Spacer itself is perfect.
Some hard Material (maybe in the 6000's based on machinability and Anodized's coloring? Mystery) and smooth surface.
0.It would be very nice to be able to purchase 1pc. units of Spacer for use on car bodies, unless there is a need for accuracy in 1mm increments! View detail

POSH

30 Jan 2024

Universal Collar Set

Japanese Webike user

5/5

To prevent deformation of the Footpeg Holder fixation area

I bought a battered 900SS (900SL) and am Restore.
There was a history of a fall by a previous owner, and although the frame was not bent, the footpeg holder was slightly bent and tilted inward, and when the right footpeg was attached, there was only 2mmm clearance with the swing arm....

Leftfootpeg has a Clearance of about 5mm, so I purchased this collar to be inserted between the Footpeg Holder and Frame to ensure this Clearance.
Separate Quantities:Pair (for Left and Right) The gap does not have to be aligned at 2mm, but 2mm is indeed too narrow....

There are cheaper aluminum collars, but those cheap ones are made of the same soft raw aluminum material, not parallel or anodized....
The base of the Footpeg Holder is a part that is subject to large forces, and it is a part that can be seen to the fullest extent.

Material is not specified, but looking at the coloration of Anodized, I wonder if it is in the 6000 range?
It feels like a round bar of extruded material that has been machined.
Perhaps we did not dare mention the Material name because we could not use a good sounding name such as Duralumin or Super Duralumin.

But if it's in the 6000s, it's rather wishful thinking.
Exactly for use in external visible positions due to its high corrosion resistance.
Of course, unlike cheap products, they are very hard and will not deform or crack even when tightened with an M8 bolt.

Small items such as these tend to focus only on cost performance, but it is only natural that good items are expensive.
If you procure colors from Home center for cosmetic reasons, they are bound to be white, powdery, and shabby in a year's time.
For those who think that the most important thing is not the price in the immediate future, but the ability to remain solid for several years to come, the Quantity is a small fraction of the price of the original product.:2pc. This product, which is available from Set, is convenient and geeky. View detail

G-Craft

18 Jan 2024

Shim Set M10

Fits: Others

Japanese Webike user

5/5

Shim for M10Bolt is ideal for Caliper

This is a 0.5mm thick iron shim.
0.Since it is only 5mm, it is difficult to use it as a Washer unless it is a very special Bolt (e.g., Shim O.D. and Bolt O.D. under the neck are the same).
So what kind of use is it for?

The reason for this is that the caliper is offset by putting it in the mounting surface of the axial caliper.
Exactly for adjustment to bring Opposite Caliper to Center against Center of disc.
Almost all axial Calipers use the M10Bolt, so it should work for most car models.

There is no need for Opposite Caliper to be in the Center of the disc in the first place (Piston's output is Quantity).:Pair (for Left and Right) In addition, it is unlikely that the gap between the disc braking surface and the inner surface of the caliper will be so large that the disc braking surface contacts the inner surface of the caliper, so it is basically a self-satisfying part.

But... there are vehicles that actually Gap to the verge of contact...
In the case of my car, Yamaha TDM900, for some reason, the Right Side has a 3mm gap at the center, and I have adjusted it by adding 3mm thick extra-thick shims.
The other car, a Ducati 900SL, is a Large sturdy car...or so I thought...but it's not...it's a Quantity!:Pair (for Left and Right) Both are at 1.5mmGap.
I haven't changed anything or cut any part of the OEM in either case.

Limit contact is not made, so there is no problem to use it as it is, but I don't feel good, so I adjusted it with this Shim.
From the outside, though, you can't tell anything.

The Merit that Caliper gets from coming to the Center is besides feeling good. BrakeTouch gets better." There are also.
In theory, BrakeTouch should not change just because Caliper comes to Center, but the change can be felt quite clearly.
ProbablyQuantity:Pair (for Left and Right) I guess the Fee Ring will change for the better by aligning the amount of Caliper piston that is popping out at the
I can only assume so. View detail

POSH

09 Jan 2024

Stainless Steel Spacer Shim for M8

Japanese Webike user

5/5

For Pedal adjustment of homemade footpeg

I purchased this as a Material to create a 900SS (900SL) footpeg.
If you want a footpeg that has a bearing on the pedal axis, is coaxial with the footpeg, and does not have an extreme up or back position, the only decent footpeg left is the AELLA 900SS footpeg made by Kasuno, except for those made overseas.
Then why not just buy AELLA? I would say, but AELLA boasts gorgeous cutting and looks too flashy....
We had no choice but to use a footpeg (Position, stiffness, sobriety, all good) that was sold by GARUDA, but unfortunately it was already discontinued.
In addition, the GARUDA-made footpeg has a special eccentric footpeg receiving structure, and the pedal receiving part is made of POM resin material.
Even if the bearing is not a Bearing, there is no problem in operation, but the rigidity of the Bearing type cannot be beaten.
The problem with the Largeest is that the method of connecting the Footpeg is special and requires a Φ17mm eccentric Aluminum Footpeg.
Of course, Footpeg is also out of stock and cannot be repaired in the event of a fall.
Therefore, we decided to use only the holder part of the footpeg (obtained secondhand) and to modify the footpeg to the Φ8mm bolt coupling type commonly used by other companies, so that the pedal can also be mounted coaxially.

Prepare a bush that fits in the Φ17 section effectively, drill an M8 screw hole in the center of the bush, and fix the bolt so that it is tightened together with the footpeg while sandwiching the bearing of the pedal.
...Then, in the pedal section Bearing, the inner race and outer lace end faces are flush with each other, so the pedal locks up.
To prevent this from happening, a Spacer that only contacts the inner race part should be inserted......so this Washer or Shim was selected.
What you need is Bearing's Quantity:Pair (for Left and Right) To Quantity:Quantity in 1pc. each:1 Set of 4pcs., so there are 6 extra sheets, but that's OK, you may use them for something else sometime!

Shim thickness can be selected from 0.1mm, 0.3mm, and 0.5mm, but this time 0.3mm was used.
We wanted to reduce the gap as much as possible, so we wanted to use 0.1mm, but we didn't want to have it contact when the entire weight was on it and it was bent, so we used 0.3mm with a little bit of leeway.
If you are aiming for limit, there is a te to adjust by overlapping 0.1mm shims, but I decided not to use multiple shims because they are troublesome when servicing.
But on second thought, 0.1mm might have been better since I don't disassemble footpeg frequently.
0.It is better to overlap 1mm to 0.2mm gap because it should be Cool with gap Limit.

At any rate, 0.3mm is OK because it does not feel too governor!
It is not a part that requires extremely high precision.
I think it would be ideal for something like a playful take on "Lever". View detail

KIJIMA

08 Jan 2024

Handlebar Up Collar

Fits: TRIUMPH BONNEVILLE T100, TRIUMPH BONNEVILLE T120, TRIUMPH Bonneville Bobber, TRIUMPH Bonneville Bobber

Japanese Webike user

5/5

Riding posture becomes easier.

I installed this on a 2018 Bonneville 120, I drove it for 6 months in OEM condition and wanted to do something about the Handlebar position as it was a little low for me. The price is reasonable and easy to install.
The only tool needed is to remove and install the Bolt, so the OEM is loosened with 14mm and the Kit is tightened with 17mm.
The firmness of the product when installed is sufficient. Almost no after-mounted feeling.
The Mirror is now in a higher position, so it is easier to see.
I can't say for sure since I haven't run long distances yet, but I think my upper body will be in a more upright position, which may cause my buttocks to ache faster. Recommendation for those who have difficulty leaning forward. Of course.
As mentioned in the product description, Cable and other devices can be used without modification.
In the case of the T120, the OEMWasher on the Bolt side as described in the instruction manual seems to be replaced by the Bracket pedestal that holds the Cable. View detail

KN Planning

12 Oct 2023

Spacer

Fits: Others

Japanese Webike user

5/5

For a little Accent

[How is it used?
The bolts that hold up the exterior of my long-owned motorcycle have become rusted over the years, If we're going to replace the Bolt anyway, let's put some Accent in it." This product was purchased to match the Cap bolt with the
The several color variations are useful because they allow Spacer to be used in accordance with the color of the car body.
Was the one you received as per Image?
Standard for this type of aluminum spacer. FUJI TUBO type. The product was just as beautiful as the image on Webike's website, and it was exactly as shown in the image, without the uneven staining that is common in low-priced aluminum collars from other companies.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
The BoltSingle Body can be used as a one-point accent when installing the License Plate, which is not so easy with the BoltSingle Body.
It is not lightweight, reinforced, etc. (strictly speaking, there is a slight increase in color), and it costs a lot of money, but I like this kind of product, and I am very grateful for it.
The appearance is that of the FUJI TSUBO Type Design from a generation ago, so in the age of 2025 Fashion!" I'm not a middle-aged person, but I'm not a trendy middle-aged person.
[Included Parts:were they on?
None
2 piecesQuantity:The price for the set is 880 yen, and I would appreciate it even more if it were a little cheaper, but the product is out of season, so I guess I should be glad that it is on the market.
[Was there anything that disappointed you?
If you like the design as shown in Webike's image, you can buy it. Disappointing. It is lightweight enough.
Make good use of the wide selection of 9 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is at the top level, so I don't think that wrong usage is likely to occur (unless you get twisted and use it in a different way on purpose).
[Notes]
None in particular, in Color variations. The color tones are different from what I saw in the picture." There may be some things that are not so common in motorcycle accessory stores anymore, but that may not be a problem.
[ITEMS TO BUY TOGETHER
Cap boltTypeExclusive Since it is like a collar, please purchase a cap bolt of each material & length that you want to install.
[Opinions and requests to Manufacturer
It is easy to purchase large quantities if the price is a little lower, so a quantity of 10 pieces is 10% cheaper.:A Set would be even more appreciated, please. View detail