Reviews
Simple is good.
Installation is very easy as it is fixed with a tie band, but I am concerned that it may move in the future as the tightness is weak.
I installed it on my OHLINS front fork and I like the simplicity of it.
There are other, more expensive ones out there, but I think this one will suffice.
View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ125, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX
Purchased White for Decal paste
I bought White to match Decal. 。 The OEM YAMAHA Logo has a convex shape, but this one is plain and can be applied cleanly.
Relief shape other than Logo and others are similar to OEM!
The OEM did not think anything of it.
It goes on easily, but I wonder if the Body of this one is slightly deformed.
Hole position did not match Exactly.
Screw one of the first three holes at the end, and the other holes are used for the Body.
The holes were aligned as if they were pushed in or aligned with each other, and the screws were inserted into the holes without any problem.
Be careful not to insert the screw into the gapped hole by force, as it will enter the screw at an angle and damage the screw threads on the fork side.
There is no distortion after installation, and the gap between the Fork and the Fork has been properly taken care of.
View detail
Fork Guard
It was well made and there were no problems with installation.
You can choose the color, which is very good.
Too bad the Hexagonal Wrench that came with it was a bit soft and broke off.
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
Luxury!
Installed on a 2014 CB400SF.
The truth is that Material:I wanted Carbon, but I heard that the Manufacturer is out of stock.:I purchased Titanium.
When it came time to install it, I was satisfied with the result because it looks luxurious.
One thing that bothered me was that the supplied lock nut used to secure the band was too hard, and it looked like it might nick the Torque head, so I used a commercially available lock nut.
If the bolt is tightened too much, it will be difficult to remove the bolt, and the bolt may be cut off with a grinder or similar tool.
View detail
The real thing is bigger than expected
I installed it on a honda xr 50 motard model. I used it as an appearance, but the actual product I got was a bit oversized than I expected. If it is installed on other models, it may be more suitable, so I suggest that if it is installed on a mini For bike models, choose the appropriate brand for the model. The common product will always be over size compared to the mini bike model. View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II
U-KANAYA U-KANAYA Aluminum Billet Front Fork Guard
FrontOHLINSGold stick and the color is perfect. It is powerful. View detail
I'm not sure how it works, but I'm trying it on.
[How is it used?
It is attached to the Upright Front Fork.
Was the installation difficult?
Easy to install, just wrap the Body and tighten with the Tie Wrap.
How was your experience with it?
You can't see it, it doesn't have much of a Custom feel, and I'm not sure if it works or not.
[Included Parts:were they on?
Tie Wrap and Protective Rubber
(Point of installation and hang/Instruction Manual, availability and clarity)
There is no Instruction Manual, but you'll know it when you see it.
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
For Inner Tube Protection
It's not a very good build.
If it is not done properly, the Outer tube may be scratched during installation.
But! It's not available from any other manufacturer, so I had no choice but to…install it carefully.
View detail
To dress-up your feet.
You can dress-up the OEM plastic texture without any hesitation.
The shape is NORMAL itself, and the color is Black, so it's the best match for those who like a calm feeling.
The mounting holes are reinforced with Gold as well as NORMAL, but the excess resin on them is not taken care of, and the Bolt could not be inserted unless you file it, so it gets 1 Minus star.
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
The appearance of the K-FACTORY color titanium front fork cover is a lot more!
The K-FACTORY color titanium front fork cover is suitable for CB400 SF models. It has the same function as the original front fork cover. It can effectively prevent dust and gravel during driving from hurting the surface of the front fork inner tube and causing scratches. Caused the front fork to leak oil! But the appearance of the color titanium makes the texture of the car a lot more points!! ------------------------------ ---------------- K-FACTORY color titanium fork cover is suitable for CB400 SF models, it has the same function as the original fork cover to effectively prevent the dust and debris during the driving process to damage the fork inner tube surface to produce scratches and cause fork oil leakage! But the color titanium appearance of the car's texture added a lot of points! Powered by Google Translator View detail
Is good
The color can be changed at a low price against OEM, and the accuracy of the stopping point is Bolt On without any problem at all However, it is a must to stick Decal because it comes off the polish when parts cleaner is blown View detail
It's cheap, so I was able to get it for nothing
Easy to install, just wind it up!
All have the same protection, so the features versus price is excellent
It's not a dress-up because it looks cheesy
BALI is less so-so
It is for SmallEngine Displacement Volume, but it is 1100 The Fork of KATANA is the modern 125-250 Class, so it was possible to pimp it
The photo is pasted with CarbonFilm
View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ125, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX
For OrderDecal
Decal cannot be applied to the OEM because of the floating logotype of YAMAHA
Third party products don't have them, so they can be applied firmly
The problem is that the hole accuracy is a bit poor
View detail
More effective than I expected
Because it is a Universal Product, I installed it with Cut.
As the price is a part of Large grain, the image of Front will change galaxy.
It is easy to install because it only winds with Tie Wrap.
My car is white, so I am using it as it is, but Material : If you paste Carbon Style Cutting Sheet, you can expect further Dress-up effect.
View detail
Yamaha cars are
When purchasing XT, Ale? Recent Yamaha cars were found if I was looking for something different that I thought that Fork Guard was on even On car.
For Minimoto ?, the price is also cheap and I tried buying it at all.
If it matches only Fork size, match the length of Rubber, winding in Fork with Body, complete with Tie Wrap Fixing. I can do it now..
I do not understand the effect, but I tried casually.
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
It is safe to have it
Since OHLINS Front fork was installed, it was installed at the same time.
The meaning as a decoration is stronger.
I wish I could bake with Color a little more with Color.
View detail
Fits: GASGAS EX350F, GASGAS EX450F, GASGAS EC250F, GASGAS EX250F, GASGAS EX300, GASGAS EC350F, GASGAS EX250, GASGAS MC450F, GASGAS EC250, GASGAS MC250, GASGAS MC250F, GASGAS EC300, GASGAS MC350F, GASGAS MC65, GASGAS MC125, GASGAS MC85, HUSQVARNA 701 ENDURO LR, GASGAS MC50, HUSQVARNA 701 ENDURO, HUSQVARNA FS450
To Accent of a favorite car - - -
We installed in KTM 690SMC-R.
Since adaptation of this model has no description, I tried to imitate other people's attaching.
The tasteless feeling of Normal bolt makes Accent a better feeling for this product.
However, since I think that it is only an appearance, I feel that there is no functional function.
Those who think that Fashion is from the legs please!
View detail
Is it better than nothing?.
I do not know the honest effect.
Since installation can be done as long as 10 minutes, it may be good to keep cars that Fork Guard is not holding for the time being.
View detail
Fits: HONDA CRF450R, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ450FX, KAWASAKI KX450F
Mounting on WR 250 R
I thought that Manufacturer of Shock was also common with YZ, but in WR 250 R, even if it is attached, it is shallow so that it can not be installed securely.
I need to scrape slightly.
However, the performance is a first-class item, it does not drop off,. It protects Fork.
It looks good one point and it's good.
When installing firmly in the WR 250 R, you need a lathe or Grinder.
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
Looking at ◎
Although W800 tends to be seen in TouringMotorcycle, I want to transform it into SportyMotorcycle even a little,
I took Fork Boots and installed this Guard.
Material : Titanium and Material : Carbon and I had a lot of trouble.. Size is M
View detail