Reviews
Easy to Ime Chain
I want to brighten up the Tire section a bit,
To match Body's Red.
MDF Mirror red 6mm is attached.
I forgot to buy the Sticking Gauge for Rim Stripe, so I'll put it on by feel.
Well, I was able to do it just fine.
View detail
MDF Rim stripe 4M Red
Used for 10Inch wheel of ADDRESS V100
Selected because it was good to use it on the GSX-S of the Main vehicle.
You can choose the width of the rim sticker according to the vehicle Image.
This time, 4mm width is recommended as it tightens the foot.
View detail
MFDRim stripe for 14Inch 4M Candy blue
Used for Wheel of Car
We selected the 14inch wheel because it was a 14inch wheel, but if you want to use it for a wheel in a car, please use the 14inch wheel.
It seems to be correct to use 1Inch lower Size (In this case, it is better to select for 13Inch)
It is not impossible to put it on, but you need to be careful because there will not be much room at the joints.
View detail
Beautiful and hard to peel off! Easy to immeChain!
Convenient for when you want to immeChain a bit! Very beautiful!
It is well made, hard to peel off and easy to apply!
It's nice that there is a spare in the package for misapplication!
Hold on to the Rim tape until you change the Wheel. (Lol)
View detail
It's easy to paste.
I used it on my friend's Scooter. After degreasing and applying it properly, it did not come off even if I washed the car hard. I used to put a cheap product from another manufacturer on my friend's Scooter and it came off in less than a week! View detail
For those who want one point for the suspension...
I am a Rim Sticker Large lover, so I have applied Large stickers on my motorcycle for many years, but I always buy MDF's split type stickers because I think they are very good and easy even for an amateur like me.
When you look at it up close, it may not look like a nice circle, but when you look at it from a distance and while the tire is rotating, it already looks like a large body circle, so it's OK! I put it up with a forgiving attitude.
View detail
Degreasing is important.
Wheel stands out in Titanium color.
Degreasing is quite important. If you do not do it many times, it will peel off.
It was more cleanly applied without detergent solution.
If you have the OP's Squeegee, you can put it on without shifting.
View detail
Rim stripe looks surprisingly different
I bought it to dress-up the wheel area. I think it also has a slight function of guarding the area around the rim, which is prone to scratches.
When pasting, apply with water. I used Guide, but the rim stripe may be slightly shifted where it overlaps. However, it is not noticeable unless you look at it with a gun.
Since it will feel like air bubbles are rolled in, Image is a Large cut that pushes out air bubbles when applying.
Although it is a non-reflective type, the change in appearance is large, and I thought it was a part that makes it easy to feel the changes in my car.
View detail
I tried to match the color of the car body.
I switched to Triumph Tigers Ports 660, so I put the same MDF rim stripe as before.
The color is Blue to match the color of the car body.
I ordered and received it in about 3 days.
As shown in the instructional video, degrease the wheel attachment area and mist the wheel and tape with water containing 1 or 2 drops of neutral detergent. Then, using the special Gauge, I attached the 4 tapes. After the tape was attached, the heat gun was used to warm up the tape and fix it in place.
If the initial positioning and the next Tape overlap are done properly, it is not a difficult task.
Durability and fading are unknown due to the short period of wear, but price-wise, Solid Collar should be a little cheaper.
View detail
It stands out on Gentle because it reflects beautifully depending on the angle of view.
I applied 16~for 17in. of MirrorTYPE Blue to a 10inch Scooter. I am satisfied with the feeling that the Wheel itself became more luxurious than the original color! View detail
one's fashion style begins with one's feet
Recently, I feel that many cars have rim tapes, but Small's partner is all in blue, which is simple and fine, but I wanted something different, so I decided to customize the rim tape.
In construction, the challenge was to use a guide jig.
After thorough cleaning and degreasing, we carefully applied the adhesive.
Anyway, I felt that the best way to hang is to take it slow at Timing, where there is plenty of time.
I put it up and wow. It's pretty good, isn't it?
It is a world of self-indulgence, but it is a good custom with a Sporty atmosphere.
To make it adhere firmly, it seems to be a good idea to finish it off with a heat gun or the like.
Items is perfect for those who want to improve the appearance of their products easily.
View detail
Basically, they are MUST dress-up parts.
[How is it used?
The new car is a must-have dress-up part when purchasing a new car, because it can be dress-up at a low cost.
The footwear looks tighter and can be reupholstered in another color if you get tired of it.
There is no effect on the run itself.
Was the one you received as per Image?
YES
How was your experience with it?
Satisfied
[Points to note]
Since there is a special jig for attaching the product, it is possible to stretch the product beautifully by using the jig.
How did it compare to other products?
No problems with thickness and adhesiveness
View detail
Newer homes are better.
I had a used MOTARDWheel that I had to replace the Tire, make it Tubeless, and even replace the Spoke for rust on the Spoke nipple, because I got to the point where I couldn't back out of it,
I've already decided to add Rim stripe to make it Beauty by the way.
Rim wounds were smoothed with BlueMagic. After that, degrease with Brakes cleaner.
As when I pasted MDFRim stripe before, I cut the entire base paper into strips and pasted them with FreeHand without using detergent because I wanted to avoid moisture as much as possible because of the hollow wounds.
After all, it was easy to paste Stripe while removing it.
The stripe is not smooth in some places due to some wounds, but since it is a used wheel, it can't be helped, so we have to put up with it.
I think the new home will be more Beauty, and I think it will also prevent Wound.
work process
1 Smoothing by gentle Gold genus polish.
2 Brakes cleaner is used to degrease and wipe down the surface three times to complete the surface preparation.
3 Cut Stripe into strips.
4 Position the Rim and attach the end about 2CM.
5 While holding there and peeling off the base paper, pull up the one to be positioned at an angle of about 30 degrees, and crimp it while holding it with the other hand.
Overlap the overlapping area by about 1.5 CM, press down again, and start.
Finally, Finish while inspecting for air bubbles and floaters while pressing down with the thumb.
Lately, I have been doing it this way without Gauge.
tools used
Compound and Gold polish, Brakes cleaner, Bent Scissors (Kyosho's well-known polycarbonate body for radio control - Scissors for cut) White Driving glove.
I felt that Takasago's ExcelRim was better for Off-Road's 15mmStripe because it didn't have any indentations or anything.
View detail
The rugged black wheel has a little bit of color, don't you think?
The vehicle is NT1100 White.
I think a delicate design is more suitable for this motorcycle than a sporty design,
We selected 4mm White.
The folded portion of the special affixing Gauge was slightly modified to fit the full circumference of the Rim.
Even though I am clumsy, it turned out beautifully, almost like it was supposed to.
It also comes with three Manufacturer Stickers, which is a nice touch. (I'm glad).
The secret is to use a thin detergent water as per the instructions, and it can be reapplied two or three times on the spot.
The large size is sturdy and durable, so there is no need to panic even if the laminate bends. Spare parts are also available in quantity.:It also says "1 Set of 2pc.
View detail
Dedicated Attachment Gauge required
I was a little worried because I didn't know the texture of Mirror red, but it turned out to be good. I applied it with water. There is a little hang at the beginning and at the joints, but it can be easily done if you have a special adhesive gauge. I did it in a small place without lifting up, so it was strange that the surface was too large to show the paste.
Once you press it down, you should not reapply it.
View detail
Easy and stylish!
Fashion starts from the feet up, as they say!
I was torn between Lime green and Titaniumium color, but I chose Titaniumium color because it does not look like OEM.
It is easy to apply and I think you can enjoy Fashion easily!
I used 6mm this time, but next time I would like to try 10mm for more impact!
It is strongly recommended to use MDFOEM's Sticking Gauge for Rim Stripe!
View detail
It's so cool!
14&13Inch
Note the order in which they are put up!
From top to bottom:Front4cards??Rear4cards??RearQuantity:1 Set of 4pcs.??FrontQuantity:1 Set of 4pcs.
Note that it will Gap if it is applied appropriately.
If you look closely, you can see the different lengths.
I thought on my own that the colors would change to rainbow colors,
Originally, each is colored.
Parenthesis is good, so I'm satisfied!
View detail
Easy to work with
I used this when I pasted Rim tape, and I was able to paste it without gapping. It is inexpensive and I think it is worth buying. View detail
Parenthesis better
The rim tape makes my feet look tighter and improves parenthesis. I love it. By carefully cleaning and degreasing the rim surface where the tape is attached, the tape adheres properly. The rim surface was attached properly by carefully cleaning and degreasing the rim surface. It took about an hour and a half from cleaning to completion, since it was my first time. I am worried about the durability, but it is cheap, so if it peels off, I will just put a new one on. It will be strange to peel off the old one, but.... View detail
easy to stick to
It is easy to apply because of its thickness and solid shape.
A misting spray with mild detergent and parts cleaner are required for installation. It is better to use a separate guide for more beautiful installation.
17in. is applied by overlapping each other by about 2 cm, so that the color and Logo are diagonal.
I thought the light reflection made it look like 7 colors, but it is actually Gradation.
Rim sticker is a Commendation by MDF
View detail