Reviews
Knee grip is easy!
It was installed with only Circuit use in mind.
It's easier to knee grip.
It looks good.
View detail
Easier Knee grip
This will be a reReview.
Immediately after delivery, only the side cover was attached, but later the tank side was also attached because the legs hit the tank side when the vehicle body is supported by the outer legs with the ass shifted, such as when driving on a mountain pass.
The positioning was done without any particular instruction manual, and the position of the legs was determined by straddling the tank, making sure not to miss the point where the legs hit the tank, and fine-tuning the position so that the line of the tank would be consistent with the line of the tank.
As with the Side cover section, when attaching, peel off the backing paper gradually to prevent air bubbles from entering, and apply it from the center outward in a way that releases air.
Although I am rather clumsy, I think I was able to apply it reasonably neatly.
As a result of driving on the pass, the Tank was well supported during Cornering and had the expected effect.
Especially in the forward leaning posture of SS, it is somewhat easier to support the upper body by having a good knee grip.
As I wrote in my last Review, [Color] Even though it is called Clear, I am a little dissatisfied with the Cream coloring.
A little more transparency would be nice without destroying the design of the car body.
View detail
Fits: HONDA VFR800X, HONDA VFR800F, HONDA VFR1200X, HONDA VFR1200F, HONDA CBR900RR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR400R, HONDA CBR1000RR, HONDA CB750, HONDA CB400X, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1000SF, HONDA CB500X, HONDA CBR500R, HONDA VTR1000F
sense of unity
The last time I bought and installed the same Black color, I thought it would be more consistent with the same color, so I decided to buy a Blue color before the Point expired.
I like the texture but the Design is so-so.
View detail
The dignified appearance is atmospheric.
I use the IMSBig tank's OEM fuel cap, which does not have an arrowhead retaining mechanism, so no matter how hard I push it in, it comes off after 30 minutes due to the reaction force of the hose. The adhesive strength of the Aron Alpha is definitely ??????????. I like the way it stands up to the Chocolate. View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Carbon Wind
I am happy with the tightened look.
The work is also easy, just paste it on.
It would be better if it were cheaper.
View detail
Fits: HONDA CB1000R, HONDA CB1300S, HONDA CBR650F, HONDA CRF1000, HONDA CRF1100, HONDA CRF250RLAC, HONDA GROM125G, HONDA CBR250RR, HONDA CB400SF, HONDA CBR650R
To PetitCustom
I think it is good because it looks different.
It would be better if it were cheaper.
View detail
Fits: BMW S1000R, BMW S1000RR, BMW M1000RR
Tank Pad
I am very satisfied with the texture this time.
I had a good business transaction with Large.
View detail
To prevent scratches on Tank
I bought this to prevent scratches to the Tank as it is SS.
It is not limited to this product, but it is rather difficult to make sure that the center is exactly in the center when applying.
The adhesion is neither too strong nor too weak, and I think there is a good balance between strength that does not seem to peel off on its own and weakness that does not damage the paint when peeling it off.
The size is a little larger than the cheap ones from other companies, and the cover range is wider. The texture is glossy and gives a sense of high quality, but the durability against sunlight is yet to be seen.
View detail
Required Items for SS
I chose this well-known product because there are not many other SC77 exclusive products available. The shape was Exactly to the Coloring and Shape of the Tank.
The installation itself is easy, but you need to be reasonably careful to apply it without air bubbles. I don't care much about it, so it took me about 10 minutes to apply it. The surface is smooth, so air bubbles don't bother me too much.
I accidentally applied it right after coating and it came off. However, I was able to cleanly peel off the adhesive tape and reapply it with a 3M double-sided tape that I bought separately. Since the product originally came with 3M, I did not feel any discomfort and it was finished beautifully.
View detail
Before Tank gets hurt.
Attached to GSX-8S
I put it on right after delivery before Tank was damaged.
I really wanted Black, but Material was out of stock.:Buy Carbon Style
It is recommended to degrease the surface thoroughly with Silicon-off or similar before applying the paste.
Since it is a seal type, it will be difficult to modify once it is pasted, so be sure to position it properly before pasting it.
The cutout allows for attachment to the loose curvature of the Tank.
There was a little scratch on the left top from the production process, but I didn't mind as it was a consumable item.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather
I'd have to look closely to see it.
It is solid and looks good.
The problem is that the color is so light that I feel that if you don't look closely, you won't be able to tell that it has been changed.
Self-satisfaction.
View detail
Genuine Yamaha Tank Pad for MT10
This was something I had been meaning to buy but never got around to it. My mistake as I ended up with a small scratch from my jacket on the tank. Rather than get a respray, I just thought it best for now to get a new tank pad which will cover the scratch and then also add protection for any future scuffs. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on teh genuine Yamaha one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Yamaha packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. I was expecting a slightly more domed gel pad but for what it is, it's fine for my needs. Fitting was straight forward and when on without issue. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
Pasting is easy.
The adhesive was strong and easy to apply.
Since the adhesive strength is reduced in cold weather, it is recommended to run lightly or warm up the tank with Idling before installation.
I don't know how durable it is yet, but the Guard range is Large size.
Since it is an OEMOption, it is a Recommendation.
View detail
I love it!
I am satisfied with the outstanding Hold performance and the Large change! View detail
Fits: HARLEY-DAVIDSON FXSB, HARLEY-DAVIDSON FXSE, HARLEY-DAVIDSON FXSBSE, HARLEY-DAVIDSON FXS, HARLEY-DAVIDSON FLSTNSE, HARLEY-DAVIDSON FLTRXST, HARLEY-DAVIDSON FLHXST, HARLEY-DAVIDSON FLTRXS, HARLEY-DAVIDSON FLTRXSE, HARLEY-DAVIDSON FLHXS
Good vibes
Feels good! Tank is Refreshing and feels good! View detail
Nice but a bit small.
Nice simple design. It compliments the pattern of the stock seat. It's a bit on the small side, so correct placement is key. A bit bigger would have been good. Make sure it covers the area where your belt buckle might contact the tank during normal riding. Also, be sure to fit it while the bike is level..either use the centre stand or paddock stand. View detail
It's something you don't have to ….
It's something I could do without, but it looks tighter.
I put it on when I took delivery of the Motorcycle, so I can't compare its effectiveness in preventing slipping compared to when I didn't put it on.
When asked if they are non-slip when worn, I can only say that I don't expect them to function that way….
on (for) our side (side) The "look as the most Large effect, so I think it is effective.
At the same time, I also added a Tank Pad, but this one could have been more or less….
View detail
Texture is good.
Being an OEM, I think it is Simple and very good. View detail
I got air bubbles.
Maybe it's because it's transparent, or maybe I was too bad at applying it for the first time, but the air bubbles are very noticeable!
I'm glad I don't have to worry about Zip wounds anymore!
View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT Racer
I would have liked it to be a little thicker.
It was flimsy, but I was happy with the way it was installed and looked. View detail