Reviews
Well, that's okay.
When using the OEMBlinker, a dedicated Bracket is required, and the additional cost is..,
The Exclusive Bracket is also somewhat unstable in its mounting position.
Well, I guess it is worth the price.
View detail
Wheel replacement is ….
Chain cannot be bent when removing and replacing the wheel.
Suggestions for improvement.
View detail
I think it's good that it's cosmetic.
The installation can be done by looking at the Instruction Manual, but the Blinker connection seems to be the other way around. I am glad I read your impressions. I bought some rubber string and waterproof tape at Home center to fill in the gaps. I wish I had done a little more research to see what other manufacturers were doing, but considering the cost, it was a no-brainer. I still get muddy on wet surfaces and in the rain. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
I'm not that happy for the price.
It's one of the parts for mounting the long tail. I think it can also be used for the genuine tail. It feels a little lighter compared to the genuine tail. View detail
Fender Eliminator
The installation was not difficult, and I like the fact that the OEM license plate light is used! View detail
Cost-effective and satisfactory there.
[How is it used?
Replaced from OEM
Was the one you received as per Image?
Everything that was in the picture was there.
Price is reasonable. A little dissatisfied with the texture.
Was the installation difficult?
Difficult for beginners.
Blinker, I struggled to remove the WiringConnector on the Tail lamp.
How was your experience with it?
It is more Refreshing than OEM.
Some of the OEM Fender is still there, so there are different tastes.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
A little dissatisfied with the overall texture and the texture of the License lamp.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Compromise and purchase
To prevent dirt around the exhaust pipe and puncture of the rear wheel
I would like to extend the Rear of the Front Fender,
While there are only a few compatible parts for 400X,
We finally decided on this product.
Ideally, the product would be sold as a whole Fender, or it would be able to be inserted into an existing Bolt fixed to a Fender.
Before purchasing this item,
We have found a product made by Large land of Bolt On.
Naturally, I was worried.
I inquired about the possibility of installing it, giving the year and model,
The immediate response was that it could be installed,
I bought this one immediately in response to my feelings,
Size did not match at all (laughter).
I will return the product and I will be able to use this product as a Large.
I have purchased the product.
As for the installation, first of all, why did it take so many different shapes?
He said he would probably use double-sided adhesive Seat.
I was wondering for a while if there might be a reason for this,
My 6 year old son was nearby during the installation process,
While making the sticky Seat resemble the face of Pokemon's Character, we flopped it together and pasted it onto the Fender in a harmonious manner.
Plastic screws were included in the package for drilling holes in the Fender and attaching it to an existing Fender,
The thickness of the seal was such that it would not be possible to reach the reverse side using the same screws, so for the time being, only an adhesive seal was used.
Although I am concerned about the adhesive strength, I have used it about 250km round trip including high speed touring×4 times, and so far there has been no dropout, wobble or cracking, but I will do the Screw hitting treatment soon.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 1200S, DUCATI Monster 1200R, DUCATI Supersport, DUCATI Supersport S, DUCATI Supersport 950, DUCATI Supersport 950S
If you value functionality
There are stones and mud to the back.
I was just trying to think of something better.
I found it and bought it.
It costs 11,000 yen, but it is very cheap.
If it is not imported FOR VEHICLE, then about $2,800 is a reasonable texture.
The installation does not make Parenthesis better, though,
For function-oriented and discrete use, ….
View detail
Color installation is Large variety
As others have reviewed, it is difficult to install the four collars for attaching the Fender EliminatorBody to the body. I think it would be much easier to work with if the collars were at least flange-like.
The appearance is neat and satisfactory. The weight seems almost the same as OEM.
View detail
A little bit to long
In my opinion a little bit too long to fit beautiful to stock exhaust, but maybe with akrapovic muffler will looks perfect I dunno. View detail
It is not a pontoon.
It is held in place by 4 hex screws, but it is not a simple screw-in, and the screw holes on the Fender side need to be widened.
It looks Cool.
View detail
Compliance with Laws and Regulations
Installed on a last model CB400SF. (Molds after 2019)
Legal restrictions such as the angle of the Number are strictly enforced depending on the year and the time of first year registration.
This product is sturdy enough to comply with vehicle inspectionsLarge because it is compliant with angles and other requirements.
However, we have been told that some DREAM stores may uniformly consider Motorcycles of the regulated year as Fender EliminatorNG,
In the meantime, I decided to keep the Normal fender as well.
I did the work by myself and was able to complete the work without hesitation due to the detailed Instruction Manual. 8mmSocket, 10mmSocket, 3-4-5mm Hexagonal, 10mmSpanner, Radio pliers, thin Slotted screwdriver
The keyhole for the SeatOpening is different from that of other Fender Eliminator models. (Prayer is all we can do now.) …
It generally took about an hour.
Design and finish,
There is no Japanese Vehicle Inspection Correspondence for the latest regulations other than this one, so there was no choice. I did get the Refreshing, but I give it a 3 star rating.
Ideally, I would like it to be a little higher, further back, and angled. I don't have a choice.
The accuracy of each Part is high, and the Laser marking in Small is just right and gives a sense of ownership.
You will also want to change the Blinker.
View detail
Scratch regrets
Delivery and packaging were good, but there were scratches on the product.
Until exchange request
But my effort and time
It's a shame.
People around me said it was a good brand, so I ordered it, but I was very disappointed.
Perhaps because it was an in-stock product, additional products were ordered.
I hope the product is in good condition. -------------------------------------------------- -------- Delivery and packaging status was good, but the scratch of the product Until application But my efforts and time It's a waste. I ordered it because it was a good brand around, but I was disappointed. The additional product ordered is because it is inventory. I look forward to the good product condition. Powered by Google Translator
View detail
The construction is neither good nor bad, but not overpriced.
The difficulty level of installation is fair, the quality is neither good nor bad, and the price is a little high for the content.
The first step is to remove the OEMFender, but the Instruction Manual is wrong from the very first step.
It says two Bolt, but I have to remove four… I can tell when I see it, as you can see in the picture.
Assembly after removal is as simple as looking at the Parts.
I would have liked the shape and overhang of the License Plate Light to be a little more manageable.
Incidentally, the compatibility with KIJIMA's LED Blinker is subtle.
As you can see in PlateBase, the Small Type-ized Blinker seems to be quite hidden.
It may be necessary to shift the Number down or overhang the Blinker at the time of inspection.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Wiring ingenuity required
The original wiring is surprisingly long and there is almost no space for it.
If possible, I would like to see ShortWiring or a storage boxetc. on the back of the number.
Also, it was difficult to understand where to use the original screws and the screws that came with the product.
It would be even better if the Number angle could be adjusted.
I dare to be harsh in anticipation of Moto Crazy's future.
View detail
I prefer a little more Up.
I wanted a little more angle on the Up. It would be better if the angle could be adjusted. So I am not satisfied with the angle of this Number.
Installation is not difficult, although a little cumbersome.
I wish it were a little cheaper.
View detail
Blinker overhang is a bit weak.
The degree of difficulty in assembly and installation is low, and as is typical of DAYTONA, the precision of the product is high.
Were there any changes due to the year in which some parts differed from the Instruction Manual?
The balance between law and design is good, but I feel that the design could be a little more aggressive.
What I'm interested in is Blinker's Quantity:Pair (for Left and Right) Amount of overhang.
When the company's License Plate Base is installed, the Blinker becomes quite difficult to see.
At the time of inspection, the Number must be shifted slightly or it may not pass inspection.
View detail
Type ordered and …….
It took me a while to do the work because I had to remove and install the tires in order to replace them.
Mr. WeBig…… Do you check the contents of the product once it arrives from the supplier?
It's not the Type I ordered.
I didn't return it because I had to wait quite a while for it to come in and I was happy with either Type, but this is a return item.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Cosmo
Note that the OEM LED Blinker has a Large Coupler and will not fit through the wiring hole.
Other than that point, I'm glad I bought it.
View detail
I'm being dry, but ...
First of all, installation is quite troublesome, especially if the Rear Carrier and Box are installed.... WiringCover- and Boots are not included for the high price. Although the wiring retractable part is designed to minimize water intrusion during mud splashing, there is a slight gap, so the part was treated with coking. After installation, it looks more expensive than other products (in fact, it is expensive...) and Parenthesis is good. View detail