- Home
- Product reviews
- Motorcycle Parts
- Bodyworks
- Fenders
- Front Fenders
- Compromise and purchase... (P&A International: Extender Fender)
【P&A International】Extender Fender Review
Compromise and purchase
To prevent dirt around the exhaust pipe and puncture of the rear wheel
I would like to extend the Rear of the Front Fender,
While there are only a few compatible parts for 400X,
We finally decided on this product.
Ideally, the product would be sold as a whole Fender, or it would be able to be inserted into an existing Bolt fixed to a Fender.
Before purchasing this item,
We have found a product made by Large land of Bolt On.
Naturally, I was worried.
I inquired about the possibility of installing it, giving the year and model,
The immediate response was that it could be installed,
I bought this one immediately in response to my feelings,
Size did not match at all (laughter).
I will return the product and I will be able to use this product as a Large.
I have purchased the product.
As for the installation, first of all, why did it take so many different shapes?
He said he would probably use double-sided adhesive Seat.
I was wondering for a while if there might be a reason for this,
My 6 year old son was nearby during the installation process,
While making the sticky Seat resemble the face of Pokemon's Character, we flopped it together and pasted it onto the Fender in a harmonious manner.
Plastic screws were included in the package for drilling holes in the Fender and attaching it to an existing Fender,
The thickness of the seal was such that it would not be possible to reach the reverse side using the same screws, so for the time being, only an adhesive seal was used.
Although I am concerned about the adhesive strength, I have used it about 250km round trip including high speed touring×4 times, and so far there has been no dropout, wobble or cracking, but I will do the Screw hitting treatment soon.
ประนีประนอมและซื้อ
เพื่อป้องกันสิ่งสกปรกบริเวณท่อไอเสียและการทะลุของล้อหลัง
ฉันต้องการขยายส่วนท้ายของบังโคลนหน้า
แม้ว่าจะมีชิ้นส่วนที่ใช้ร่วมกันได้เพียงไม่กี่ชิ้นสำหรับ 400X
ในที่สุดเราก็ตัดสินใจเลือกผลิตภัณฑ์นี้
ตามหลักการแล้ว ผลิตภัณฑ์จะขายเป็น Fender ทั้งหมด หรือสามารถเสียบเข้ากับ Bolt ที่มีอยู่ซึ่งยึดกับ Fender ได้
ก่อนที่จะซื้อรายการนี้
เราได้พบผลิตภัณฑ์ที่ทำโดยดินแดนขนาดใหญ่ของ Bolt On
โดยธรรมชาติแล้วฉันก็กังวล
ผมสอบถามความเป็นไปได้ในการติดตั้ง โดยบอกปี และรุ่น
การตอบสนองทันทีคือสามารถติดตั้งได้
ฉันซื้ออันนี้ทันทีเพื่อตอบสนองต่อความรู้สึกของฉัน
ขนาดไม่ตรงกันเลย (หัวเราะ)
ฉันจะคืนสินค้าและฉันจะสามารถใช้ผลิตภัณฑ์นี้เป็นขนาดใหญ่ได้
ฉันได้ซื้อสินค้าแล้ว
ในส่วนของการติดตั้ง ก่อนอื่นเลย ทำไมมันถึงมีรูปทรงต่างกันเยอะขนาดนี้?
เขาบอกว่าเขาอาจจะใช้เบาะนั่งแบบมีกาวสองหน้า
ฉันสงสัยอยู่พักหนึ่งว่าจะมีเหตุผลสำหรับเรื่องนี้หรือไม่
ลูกชายวัย 6 ขวบของฉันอยู่ใกล้ๆ ระหว่างขั้นตอนการติดตั้ง
ในขณะที่ทำให้ Sticky Seat มีลักษณะคล้ายกับใบหน้าของตัวละคร Pokemon เราก็นำมันมารวมกันแล้วติดลงบน Fender ในลักษณะที่กลมกลืนกัน
สกรูพลาสติกรวมอยู่ในแพ็คเกจสำหรับเจาะรูใน Fender และติดเข้ากับ Fender ที่มีอยู่
ความหนาของซีลมากจนไม่สามารถไปถึงด้านหลังได้โดยใช้สกรูตัวเดียวกัน ดังนั้นในขณะนี้จึงใช้เพียงซีลแบบมีกาวเท่านั้น
แม้ว่าฉันจะกังวลเกี่ยวกับความแข็งแรงของกาว แต่ฉันได้ใช้มันไปกลับประมาณ 250 กม. รวมทั้งทัวร์ริ่งความเร็วสูง× 4 ครั้ง และจนถึงขณะนี้ก็ยังไม่มีการหลุด โยกเยก หรือแตกร้าว แต่ฉันจะทำการรักษาการชนของสกรูเร็วๆ นี้