Reviews
Good for improving the texture of the CBR650.
I installed it on my wife's CBR650.
In addition, I also installed the Tank's Side cover and Front Fender with aluminum ones.
Maybe these weight increases are de-tuned in terms of performance.
However, from a design standpoint, this one is the best match, even if it arrived in NORMAL.
It's important to look good if you're not going to use it for Race or Circuit driving.
It's expensive, but it's perfectly stylish and I love it.
View detail
The miscellaneous aluminum fabric looks good on the contrary.
The result is an old-fashioned look, like an old Cafe racer.
It's really messy and uncomfortable to install, but it installs properly.
It is cheap and can be installed in the part where the part after the exhaust system of MONKEY is replaced became scant.
View detail
With a little work.
I bought this because I'm worried about the waterproof of Wiring with Grip heater.
I was wondering if it would work with the OEM Grip heater because it says it can't be installed at the same time as the heater ””, but it only uses the same mounting part, so I was able to install it without a problem by changing the bolt to a hole in one of the nuts. There is a feeling that it is a little expensive, but I am satisfied functionally.
View detail
CHIC DESIGN Masker Load
It fits perfectly.
There is no difference between the paint and the body color, and there is no sense of discomfort.
As for aerodynamic issues after installation, I haven't driven on the highway.
I don't know the effect, but I think the wind hitting the Helmet is less.
Total and it is a very good product.
View detail
Great cowl
I have had this cowl on my Z900rs for about 3 seasons now and it has been perfect and looks great. I have been super happy with the purchase and would buy it again. The only reason it didn't get 5 stars is because it was a little to tight to mount and needed to elongate the holes a little with a dremel to get it to fit, I talked to a couple other people with the same cowl who needed to do the same thing. It was a simple fix and its been fantastic other than that. View detail
I think we have enough.
As for the installation, I was not surprised because I had checked other people's impressions beforehand, but the length of the Bolt was still not enough.
I contacted Manufacturer and they responded immediately, so I think it is possible to consult with them.
I didn't use the double-sided tape that came with it, I used Velcro tape and Bolt that I had purchased separately to hold it in place.
The Bolt fixture also has a RubberWasher in between.
I don't really feel like the fitting is perfect.
The mounting surface will be scratched, but depending on the purpose of use, I think it can be divided and used.
View detail
Almost good
I had to shave it down a bit to Adjust it to my Motorcycle. I'm happy with the quality and rigidity. View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1000R, KAWASAKI Z1000J
durability
It may be good to buy at the place where the Point reduction is the highest. View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Looks Sporty
It looks and feels like the key to a sporty look. I think that the windproof effect is not so much because it is small. It is relatively easy to install, and if the price is a little cheaper, it is good. View detail
Fits: YAMAHA Up to XJR1300 model year, must be the same shape
This is for RP01J. Please make sure you have the correct one.
I'm getting tired of the OEMs, so I'm replacing them.
We didn't have the stones in stock, but we had them made, and that's where they were. I like it. I know!
I appreciate the feeling that it was made just for me!
I'm going to use it for a big thing.
The hole of the bolt is a little bit out of alignment, but it's not a problem because Carbon parts are designed to be machined small.
View detail
Piyo Piyo Visor
It looks lovely now.
It is easy to work with and I am satisfied.
View detail
Cool, as expected with accuracy!
The Under Cowl with Oil pan
I bought this because it was required by Circuit.
I thought Carbon would be a better choice, but
It looks Parenthesis better and was the right choice! (Translated by ω-) b
Since the bracket is one piece, the Yoshimura exhaust manifold will interfere with the bracket. So you will need to modify the bracket.
I thought it would be better if this place was divided from the beginning.
I was worried about the interference of the Swing Arm with Stabilizer, but I was able to avoid it by making my own Bracket.
The installation method is simple, so it was easy for me to make my own Bracket.
The accuracy of the installation is very good and the quality is very good. (Translated by ω-) b
I recommend it because it looks COOL!
View detail
Volume feeling around the meter is increased.
It's very easy to install, just remove the 4 bolts around the meter and install the bracket, even a beginner can do it. It should only take 10 minutes.
After the installation, I was worried about the noise, but there was no noise and I think it is reducing the wind pressure.
The product itself is very small, but I like it because it increases the volume feeling around the meter.
View detail
Volume feeling around the meter is increased.
I felt lonely around the Meter, so I installed it.
It was a very easy job, just remove the 4 Bolts around the Meter and put on the Bracket that came with it, it was a 10 minute job.
It looks so tight and I love it! 。 As for the Screen, it is small, but does it become the wind pressure reduction at least? I think.
Also, there is no sound of the Screen that I was worried about, and it is comfortable.
View detail
It is easy to install.
The wind protection effect is very good. The wind protection effect will be mild to the shoulder after installation.
The price is a little high, but the appearance design is good and I am satisfied.
View detail
I like the way it looks.
The slimness is attractive because it is VTWINEngine, but I thought that it was a little lonely under the tank, so I felt that wearing Under Cowl would give it a sense of gravity.
But this is just my impression.
OIL replacement and Element replacement are also possible while the unit is installed.
This is a Large thing Point!
View detail
difficult to install
Because it is carbon, it is lighter than synthetic resin.
It will also look better.
It may be because it is a Handmade product, but it looks a little messy.
I had to install it with a lot of force, and I was afraid that the claws might break.
I'm concerned about the gaps, which the OEM Panel didn't do.
If you're wondering, do you need a processing technique?
View detail
Overall okay
Fitted on a CB400SF 2016. Painted in red candy to match the bike. Pros: - Look: Just great, it fits the bike perfectly. - Quality: Amazing - 5* -Fitment: Perfect - 5* Cons: -The attach/straps could be of better quality. They are a bit weak and prone to crack if you tighten too much. Why carbon when steel or aluminum would be way better. -THe belly is very low. I already smashed it once and got it repaired. I scratched it again. So just be careful with that. We are lucky not to have too many high speed bumps in Australia but still have to be careful. View detail
Looks good, but practicality is …
A year and a half after I bought it, I considered buying a Bikini cowl because of the combination of wanting to relieve wind pressure on the highway and wanting to makeover the appearance.
I had a hard time deciding among the products from various manufacturers.
At first, the Green Light monochromatic color of the CHIC DESIGN Road Comet, which is the only one I have seen in person, was my first choice because of its reasonable price, but after all, if I was going to buy one, I was worried about the Tiger color to match the body of the car. I heard that Gull Craft's Cowl will be in stock soon. I gave up the opportunity to see the real thing and decided to rely on Media's evaluation and reputation.
It was my first time to purchase exterior parts from Other Brand Product, but I felt it was easy to install and a solid product.
Color:Some masking marks on Yellow line (Blotting) But I am convinced that this is the way it is because it is all done by hand.
It is not easy to see and buy the real thing, but I can recommend it. However, as you can see in other product impressions, it is better not to expect too much of the effect of wind pressure reduction. 。
However, there is not enough space between the Reserver bracket and the cowl, and it interferes with the cowl by vibration. Is it individual difference?
I cured the part that interferes with the Rubber that I bought at 100 yen.
View detail
Race ish look!
I purchased this product to run on the Circuit, and after contacting the manufacturer, I decided to go with this product because of the Oil catcher structure. I purchased the FRP White, and I am happy with the impact! The OEM Under Cowl has the bolt on the bottom side, but this product is mounted on the side, which makes it easier to maintain. Unfortunately, the delivery time is long. I had to wait 3 months for the rubber plug and bolt to come off. I used Vinyl Tape for the rubber plug and Tie Wrap for the bolt. View detail