Reviews
Interference at Bottom
For various reasons, when I removed the FrontStubby, I felt it was not enough, so I installed the Fork Guard.
Depending on the type of car, it may interfere with the Upper Cowletc. when it is bottomed out.
Please note that this is a GPZ900R and it will hit you in the guts.
My personal opinion is that the Bolt is Torque but I liked the hex on the pot. (tooling comes with it).
View detail
High qualities
I tuned z900rs by almostly k-factory parts This product have a high quality and defense dust thing for swing arm hole Good print logo and nice finish I hope to buy silver color too View detail
Does what you hope!
This is really easy to add and gives me a lot of confidence that the area under my seat will stay clean and dry. It's fairly priced too which is nice! View detail
Reflector angle needed to be adjusted
It is made to fit the TitaniumPlateHolder made by k-factory, so the fit is Exactly.
However, the angle of the reflector after installation was such that it was worshipped at the bottom. (Since the License Plate is co-tightened, the angle is naturally determined by the License Plate angle on the body side.) 。
After much consideration, the angle of the Bracket in question is angled. (Folded part) The angle was adjusted by tapping the Finally, the angle was just right.
Also, the part where the reflector attaches (Bracket part) I also thought that the bracket could be hidden when a slim-type reflector is installed if the dimensions of the "1" were made a little smaller.
I have diverted the OEMReflector so the Bracket is hidden and not visible.
View detail
Parts with a handmade feel.
I wanted to install something around the over-refreshing License Plate when I converted it to a Fender Eliminator, and I came across this product.
TitaniumPlate's baking color is not too flashy and Material:Polishing surface is Beauty there.
Since it is a UniversalParts, there was an explanation in the k-factory homepage that it may not be able to be installed in some cases when the Fender Eliminator is installed. After the product arrived, we tried fitting it to the Active Fender Eliminator Kit before installing it on the motorcycle, and as expected, the top edge of the Titanium Plate interfered with the Fender Eliminator Kit, and the Fender Eliminator Kit was not able to be installed. (Bolt holes do not align) It turned out that it could not be installed as it was, so the height was adjusted by inserting an aluminum collar on the Fender Eliminator Kit side. (Modification to lower Bolt hole) I was able to install it
The reflector bracket was ordered from k-factory and fits to the titanium plate EXACTLY, and the reflector body is an OEM transplant.
The small logo like the aluminum plate shown in the pictures of k-factory and Webike's homepage is not included.
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
Luxury!
Installed on a 2014 CB400SF.
The truth is that Material:I wanted Carbon, but I heard that the Manufacturer is out of stock.:I purchased Titanium.
When it came time to install it, I was satisfied with the result because it looks luxurious.
One thing that bothered me was that the supplied lock nut used to secure the band was too hard, and it looked like it might nick the Torque head, so I used a commercially available lock nut.
If the bolt is tightened too much, it will be difficult to remove the bolt, and the bolt may be cut off with a grinder or similar tool.
View detail
I put it near the Engine! It looks great!
Purchased to put on my PCX125.
It was packed, but it is a little Large strange to give.
I had a hard time opening it and the Sticker was a little bit worn out. This is my only regret, but I think the quality of the Sticker itself is good.
View detail
I like Simple.
Among various manufacturers and colors, we chose a plain and simple one.
I like it because it's NORMAL looking and SIMPLE!
View detail
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Not good
I don't know if it is to comply with the new standards, but unlike the previous model, there is a gap between the tail lamp and the license plate light, which is not very stylish. It was a failure in my opinion.
I thought it would be nice to have WaterproofSeat included in the package. However, the reflector needs to be prepared separately. Also, the License Plate Light and Blinkretc. are used, but they are not as cost-effective as other companies' similar products.
View detail
KatakanaLogo is good for JAPANExhaust System
KFACTORY CSRMegaphone Tail part I bought this sticker to put on my Exhaust System, K-FACLogo sticker was attached to the Exhaust System, but I think KatakanaLogo which is like JAPANExhaust System is better.
The only drawback is that it is an Aluminum heat-resistant sticker, so even if you apply it carefully, the edges tend to get a little wrinkled… This may just be my own clumsiness, but…
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
Into the Swamp of Custom
I bought it after I saw it installed in a custom car of Pro shop. I didn't intend to customize BANDIT1200s, but after I put this Parts, I increased the number of popping. I'm going to the swamp. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZEPHYR750
Satisfied
It is a simple part, but if you can open and close the seat lock smoothly, you can solve the Stress of Maintenance and Touring.
The Grease groove was the deciding factor in my purchase. I can't feel the effect, but I think it's better to have it than not.
View detail
I installed it on my ZrX1200 DAEG.
It's a pretty fancy Gold. It could be a little thinner. View detail
I installed it on my ZrX1200 DAEG.
I liked the shape.
The product photo shows the shatterproof plate as Carbon Style, but the actual product is Stainless Steel.
View detail
WaterproofSeat for Fender Eliminator
I bought it at the time of the installation of Fender Eliminator of kFACTORY which I acquired. I heard that it can be used for other manufacturers. If you use the Fender Eliminator for your car model, the Large body shape will be the same, but…it came with Instruction Manual, but I don't think it will be a problem. I'm not going to run when it looks like it's going to rain, and so far I haven't been able to feel the effect, but I think it will do the job well. View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
Looks good, effect unknown, medium difficulty to install
I installed it on my CB1300 SP.
For some reason the CB1300SP doesn't have a Fork Guard. ('; Ω; `)
I've installed KIJIMA's 1,000's in other cars, but KIJIMA's were fixed with Tie Band, so it was quite easy.
This is Bolt On.
The screw is a Torx screw to prevent theft.
It comes with the L-shaped Torx wrench you need to install it, but you will need a separate tool to fix the Nut.
The difficulty of installation is higher than others.
In brief, Power pushes Nut into Fixed Band, and Power spreads Fixed Band to cover Outer tube.
Then tighten the Bolt with Power.
We use Power all the time.
When installing, it is necessary to work carefully so as not to damage the Outer tube.
I like the way it looks installed, just like Image.
However, the cosmetic is bad, so if you just want Fork Guard, KIJIMA is enough.
So if you are looking for Titaniumium color, this is the one for you.
Material:If you want to use Carbon Style (Carbon Seat must be attached), you can use KIJIMA.
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
For Inner Tube Protection
It's not a very good build.
If it is not done properly, the Outer tube may be scratched during installation.
But! It's not available from any other manufacturer, so I had no choice but to…install it carefully.
View detail
Fits: KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZZR1100, KAWASAKI ZZR1100, KAWASAKI GPZ900R, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1100, HONDA CB750, HONDA CB400Super BOLDOR Revo, HONDA CB400SF VTEC, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1200, SUZUKI GS1200SS, SUZUKI BANDIT1200S
I don't have Fork Guard on my CB1300SF SP.
I've been wanting a Fork Guard for a while now, and I took the plunge!
Installation was a bit difficult, as I opted for the Carbon Plate
I tightened the Screw wrong. [Color] I'm afraid the Clear paint has puffed up in some areas.
It's my mistake and you have to look closely to see it, so I'll call it good.
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
The appearance of the K-FACTORY color titanium front fork cover is a lot more!
The K-FACTORY color titanium front fork cover is suitable for CB400 SF models. It has the same function as the original front fork cover. It can effectively prevent dust and gravel during driving from hurting the surface of the front fork inner tube and causing scratches. Caused the front fork to leak oil! But the appearance of the color titanium makes the texture of the car a lot more points!! ------------------------------ ---------------- K-FACTORY color titanium fork cover is suitable for CB400 SF models, it has the same function as the original fork cover to effectively prevent the dust and debris during the driving process to damage the fork inner tube surface to produce scratches and cause fork oil leakage! But the color titanium appearance of the car's texture added a lot of points! Powered by Google Translator View detail
K-factory backsplash
My car is a model of z900rs from the kawasaki brand in 2018. I bought a k-factory brand rear mud tile baffle on Webike. The material of this product is PVC plastic, which can perfectly solve the problem of exposed lines on the bottom of the car after the original fender is changed to a short tail. The decoration is very good. I am very satisfied with this shopping experience, thank you Webike! --------------------------------------- ------- My car is kawasaki brands of z900rs model year 2018, I bought a k-factory brand goods on the apron after masonry Webike. This product is made of PVC plastic, can be the perfect solution to the problem changed after the original fender short tail, vehicle line dew, decoration is very good. The shopping experience very satisfied, thank Webike! Powered by Google Translator View detail