Reviews
Axle Slider removal and installation
I had a nail puncture my rear tire and i needed to remove the rear wheel to have it fix. Initially i thought it was difficult to remove the slider but it is just a direct bolt on to the rear axle. There is no pins or special locks on the slider, its just a regular bolt on both ends of the axle slider. I assume its the same process with the front axle slider. overall its an easy fix. View detail
Fallen cannibals
I don't want to experience the effects, but I put it on as a precaution against falling.
Installation can be done by anyone.
The previous owner had KFACTORY on the Front, so I looked for it, but I couldn't find one for r1000r, so I went with Speedra for the Rear.
Since the Front Fender was changed to Speed La, the ratio of Speed La is likely to increase in the future.
View detail
It is good to be normal.
I am sorry to Webike, but I installed it because it was new and cheap at a certain Oak Auction.
I am posting this because there were no imprements.
As you can see in the product image, the parts are carefully selected.
(Aluminum Shaft to connect, Aluminum Washer to tighten the Bolt, etc.)
There is an instruction manual for the work, so there is nothing to be confused about.
Since it can be attached to SMART, it is more like a dress-up part than a slider.
View detail
It looks great!
I think this is a product that is hard to appreciate until you fall on it, but it looks Parenthesis good! I have been hearing a lot about Speedra recently, and I would like to continue to use Speedra in my Front Fender and Lever relationships! View detail
Fits: TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH Daytona955i, TRIUMPH Daytona955i, TRIUMPH Daytona955i
Genuine R&G Fork Protector for Triumph Daytona 955 1997
This bike came in for a bit of an overhaul in way of protection. The customer wanted some R&G protectors adding to it just in case of any accidents or falls. This was one of the parts for the front forks. These are really great for protectors as they do what they are supposed to do. I found the right ones bu=y just going through Webike search for this bike and they were all listed for the R&G brand. The cost was good too and were on offer at the time of ordering. Witht he other crash protectors for this bike, I got them all shipped together so they arrived at the same time. I do use EMS and my order was delivered in 5 days from being shipped. The fork protector came in the standard R&G plastic clear box and did include all you need to fit these. There are comprehensive instructions so you really cannot go wrong. The fit perfectly and the quality is excellent. The threaded sections are crisp and clean and the bobbins on the ends are perfect too. Very hard wearing from past experience. The end result is as expected and I for one am very pleased with the fitment and how they look. Thank you Webike. View detail
Perfect
Quality and Texture Information Lightweight with Aleuminum I think it'll be nice and serve as a guard for the feeling of use Product 498-1300100 to purchase together It's difficult to install The cost performance and comparison price range with other products are similar. You can choose your favorite brand Delivery and packaging to WeBike in a week The packaging is great 2 concerns when purchasing is 1 set You have to buy 2 sets View detail
good-looking
OEM is expensive, so we chose here.
I have not yet fallen over, so I do not know how effective it is.
I think it looks good.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
Axle guard by SHIFT UP
Grom (JC92) I installed it in
Material:With DURACON, it came off from the base when it fell over and had to be replaced even though it was still usable and worn out, but Material:With aluminum, you don't have to worry about that, so you can use it for a long time.
I am very satisfied with the price and the color selection.
View detail
Wow that's cool
I installed it because I was lonely around the Front.
Circuit also runs, so Protector in the event of a fall.
I hope it will be ??
View detail
Over Racing front axle slider for z650rs
The front axle slider for z650rs from Over Racing is well made and fits the z650rs stock front wheel with minimal tools necessary to install. It’s a direct bolt on and no other necessary bolts or screws are needed for installation. The sliders tip is flushed on the axle as you can see in the picture and installation time is quick. Just insert it in the hole in the front axle and screw it tight and its done. View detail
z650rs Over Racing rear axle slider
In the picture included, the rear axle slider is attached to the top of the bolt that holds the rear wheel. This is possible because the z650rs has a hole in the rear axle unlike in the other z650 lineup. It is an easy install and the sliders looks and feels well made. View detail
Cospar good
I bought this because I was told that without it, the Swing Arm would be scraped off in the event of a fall.
The length of the shaft that came in the first package was wrong, but they sent it to me right away.
I am satisfied with the quality and response for the price.
View detail
I'm not sure how effective it is, but just in case.
The quality of the slider itself seems to be a little small. Well, I bought this Slider just in case. I don't know how well it works yet, and I don't want to know. I don't even want to know.... View detail
BABYFACE Babyface:Axle Protector
It was installed together with the engine slider. View detail
countermeasure against standing up
Coloring also matched Cafe in Black??Gold.
We won't know the effect until we take it down, but installing it as an insurance policy gave us great peace of mind.
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 SP, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299
A walking stick before swallowing a fall2
[How is it used?
I was not sure whether to choose OEM Product or not, but I decided to choose this product to unify Rear and Manufacturer.
I chose Red to match the body color, and I am satisfied with the ideal color.
I feel it will protect the Front fork in the event of a fall.
Was the one you received as per Image?
I feel it is good without being too conspicuous.
Was the installation difficult?
A handling Instruction Manual is included, which describes the torque for tightening the fixed bolt, making installation easy.
How was your experience with it?
I thought it would be lighter than the BoltPierced Type ones,
The weight was there.
Plate tends to remain in the Axle Shaft when it is removed,
It takes a little time and effort.
[Included Parts:were they on?
A handling Instruction Manual was included in the package.
[Was there anything that disappointed you?
None in particular.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07
Genuine R&G Fork Protectors for Yamaha MT07 2017
This is a set of front fork protectors for the Yamaha MT07 2017 model. There are a lot of protecvtion parts you can get for these bikes and you would be hard pushed to find anything as good as R&G ones. Finding was not hard for the part number, I just checked R&G website and found them already on Webike. With a few other parts in my order, I had all shipped with EMS and arrived in 5 days. The fork protectors are a bar with 2 cotton reels on the ends. These do bolt on pretty tightly and do prortect your fork legs in the event of an accident. Obviously, a precautionary measure as you just never know. The quality of the R&G protectors is awesome. The threaded ends are perfect and work smoothly. As I said before, a nice snug fit so need to worry about wobble at speed. The ends are very hard and from experience, they do take a lot to grind down. Anyway, very happy with purchase. Thanks Webike. View detail
Fits: YAMAHA FZ-10, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R6
GILLES TOOLING GTA Front Wheel Slider
Damage reduction to the vehicle in the event of a fall and was installed as a talisman.
Above all, it looks good and Parenthesis is good.
View detail
Fits: BMW F850GS Adventure, BMW F850GS, BMW F750GS, BMW F900XR, BMW F900R, BMW F900GS Adventure, BMW F800GS
It fits.
It feels like an OEM product. Easy to install. I installed it to protect my Caliper in case of a fall. View detail
Axle Slider
Axle Sliders are sold by various manufacturers, but most of them are black in color, and this was the only one in gold. I am riding a Z900RS SE, and I really wanted a gold color because the front CB400T's tube is gold. It is easy to install. View detail